The classic problem with the LCD is that you accidentally break the Resistor array when assembling.... Look at the back of the display module and measure the...
... From: picpac@yahoogroups.com [mailto:picpac@yahoogroups.com] On Behalf Of gavinandrews ... seem ... it ... Maybe you tried it, maybe not... Have you...
I am planning to run Pic-Trak Config on a Windows XP machine but have noticed that many of the system and VB files in the Pic-TrakConfig.CAB zip file are, to...
using my knowledge of windows xp it will pop up a window that says paraphrased: "the file you are copying is older than the current one would you like to keep...
Thanks Jeremiah, I have installed Pic-Trak Config successfully, thanks to your comments. Although Setup did not give me the option windows you suggested, it...
usualy i get that window. there might be an option in windows that makes it automatic glad it worked now for me its back to the MCSA college books ... -- ...
Hi Folks! Could you explane me subj? I mean can I get waypoints from PICPAC ($--WPL) and get them on my chartplotter as objects. 73 de Igor RV1CJ ... Yahoo!...
Hi all, I have been using PICPAC/Pic-Trak v.1.01 for some time now with good results, thanks to all those who have posted here. One thing that does not seem to...
Mike: Do you have a weblink for us to see what you are talking about? Thanks. Matt ... From: picpac@yahoogroups.com [mailto:picpac@yahoogroups.com] On Behalf...
Thanks Matt, No web link here, but maybe some one has a good description of how the TK page is supposed to work using PIC-Track v1.01. Regards, Mike N8ZUV ... ...
Hi, I dusted off and fired up my picpac it has pic-trak v 00.52 loaded. I down loaded from the files area v 1.01 and tried to load it on the picpac and I can...
Greetings, After reading some of the other posts I'm wondering if I've got a dead bootloader. I'm trying to help a friend set up an Igate for weather. He...
I guess I resolved my problem with the bootloader. Although I couldn't find it anywhere, setting hyperterm to Xon/Xoff for flow control seemed to do the...
Hi, I'm using a picpac to decode APRS packets using the Decode1 code from the Files section. It's doing a reasonably good job of grabbing packets, but it...
I'm sure there is. How often does it happen. Perhaps you can try capturing audio with a sound card at the same time. When it fails, you will be able to...
Thanks for a quick response. It varies in frequency, but it's happening every 10 minutes or less. This morning it was happening every couple of minutes. It...
You could also just capture audio for 20 minutes, and then feed it to the PICPAC and see if you have a bad packet. No splitter needed in that case. Byon...
Hi Byon, Good idea on recording the audio. I fed the radio in to my PC and recorded over an hour worth of traffic. I then used Audacity to condense it down to...
Thanks for uploading that. I'll try to look at it soon and report my findings. The only resources on the PICPAC are the docs and sample code. There are lots...
Morgan, I downloaded your MP3 file, and fed it into a PICPAC running decode1 from http://www.byonics.com/picpac/picpac.zip and it decode the file without...
I built my new PICPAC this weekend and I think everything is working on the PICPAC, but I can't connect to my PC. When I power-up the PICPAC, it plays the...
Hi Jeff, I had to set hyperterm to xon/xoff for flow control in order to get a connection and to be able to download via the bootloader. with xon/xoff I see...
Byon, thanks for giving it a try. I'll check the date of the decode1.hex file. I think it was 5-10-03, but I will double check. Mine definitely goes nuts at...
Thanks, Morgan. Am I correct that I should be using a null modem cable? jeff ... get a ... you ... echo a ... working ... PICPAC, ... displays a ... fine on...
Ok, Got a problem here and I hope someone can help. I just finished building the PicPac and everything checks out find. After some messing with cables I was...
Tony, can you get back into bootload mode by holding down the two black buttons and then applying power? You should be able to null cable it to the computer ...
Tony, This is normal. You've installed Pic-Trak on your device, but it has no config data (your callsign, beacon rate, etc.). You simply need to power up...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
