... the ... (J4)? ... fans here. ... Hi Kurt, that is not really what I think I need. Decode does that for us already and is what I use now. Personally I don't...
Not sure my first post went through. I just returned from Airfest and used my Beeline GPS/Picpac/ Icom T7H for the first time in a rocket launch and have...
Have you made the following hardware changes to your PicPac? If Byon is not including these changes in recent versions of the PicPac, he should be. Mark...
I'm reposting this information for people who have recently assembled a PicPac and may not be aware of these necessary hardware mods. I'm not sure if Byon has...
for #1, yeah mine is like that too. as noted, there are some fixes for it. for #2, turn the squelch on your radio all the way down (static coming out). my...
I just returned from Airfest and used my Beeline GPS/Picpac/ Icom T7H for the first time in a rocket launch and have some questions/problems. 1. When I use...
... I made the changes recommeded by KB9KHM -- they helped a lot. THere's a picture in the 'files' section that shows the mods that he recommends. ... coming...
Hey, Got the problem with the serial port out of the way and am going to tune the Beeline GPS to 420Mhz and see if I can replicate the problem other folks are...
I swapped out the 10K for a 100K and it did not make any difference in the volume control at 433.92. I then changed the frequency to 427.92 and now have a 25%...
... in the volume control at 433.92. I then changed the frequency to 427.92 and now have a 25% range in the volume control compared to about 5% at 433. Are...
... and ... I have been using WinAPRS, http://www.winaprs.com/ Very complex to setup but that's due to all the features. It will display a connected GPS as...
... Hello again Robert, I found a program called GPSS from a fellow in the UK: http://www.gpss.tripoduk.com/ I stuck it in my laptop and it was reading the...
... my PK232 was picky about input levels. I used it for a variety of modes: (RX-only) HF RTTY, HF & VHF WEFAX & VHF Packet. so, in my sample of two TNCs,...
Hi All, Been doing some online searching to see if I can find a solution for real time display of GPS data. Now I've mentioned before that I unfortunately...
As in other APRS programs (WinAPRS) it has a capture mode which will do this and save the data in a text file on your hard drive. You must specify a filename. ...
They are if you have noise (RF/EMI) type problems. The TinyTrak3plus is really good about sending/receiving packets. KPC-3plus properly tuned up is also a...
... Actually, the TinyTrak doesn't receive packets, it just listens for noise on the the channel so it doesn't key up on top of another transmitter....
on the PK232 setup I had foil wires, toroids on the wires, extra ground... but ultimately defeated by the technology of the day - a 200MHz dual P6 that just...
Hey, Just an update on the GPSS program I downloaded from the U.K. Stuck the Beeline out in the car in the driveway (It was pouring rain.) and put the Etrex Cx...
... O.K., The GPSS program will keep track of both the BeelineGPS coming in through the PicPac/serial/USB and a second GPS unit plugged into a second USB port....
All, Well, today I finished making all the mods to the PICPAC as per KD9KHM. All went as planned and per email document. I however had in my inventory some...
Hi, Been also working with UI-View and it will also show both the BeelineGPS and the local GPS position on a map of the world. Am awaiting the undertow...
... Hi, Looked at Xastir in my linux box but wonder how hard it is to get it to work under windows. I have UI-View working with Precision Maps 8. There is...
Look in the Photo Area for actual realtime photos. Sorry about previous message saying go to FILES area. Dennis As you can see I am getting ready to mount the...
You have to use different backlight series resistors in R13 between J1 header and U1 PIC chip needs for the Blue background/White Text display a 1-1.5k ohm ...
The displays are neat but they do cost. An unlighted display from All-Electronics that doesn't have the SIPP to smash is $11.40. The lighted ones are 2.5 to 3...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
