Instead of fixing Motorola portables this morning :o) I spent a couple hours making up a graphical PortMap for the PICPAC. I hope it will be useful, I posted...
Because I am trying to have a working unit both in the housing I'm working on, and have the unit fully functional when not in the housing, I'm looking at...
I was wondering if the PicPac can control the radio in any way? The reason I would want to this is so I can transmit APRS on different frequencies. Why would I...
... I don't know about picpac controlling the radio anyway you are talking about but as far as ISS goes all you would need to do is setup the appropriate shift...
am 06.04.2003 2:45 Uhr schrieb Stephen West-Fisher unter ... Hello Steve, YES, you can use J6 to connect external switches. These will be parallel to the ones...
All, FINALLY, after about 3 weeks I had a chance to assemble my Picpac. Assembly took about an hour and the unit went together very well. I found the...
Hi Byon and all, What is the current production status of PicPac? I missed out on the initial beta release but look forward to adding a unit to compliment my...
A second question along the same line is. Will the "final version" have open access to the system, in other words will the code be modifiable and upgradeable...
Current status is that it has been sent to several testers, and the reports that I have had back so far are positive. I need to finish the manual, and write a...
How flexible is the LCD display on the PicPac? Can the software write arbitrary arrays of pixels to the character cells? Or does the display include a fixed...
Hello, This email message is a notification to let you know that a file has been uploaded to the Files area of the picpac group. File : /Preliminary...
picpac@yahoogroups.com
May 11, 2003 4:12 am
76
Hi All, I've updated the decode program to display to the LCD, as well as send KPC-3 compatible output to the serial. In the files section. Let me know how it...
Everyone going to Dayton be sure to drop by the APRS booth and say hi to Byon and all of the other APRS'ers. I'll be monitoring 446.555 and 147.575 73's Jason...
I build the kit tonight and got the data file for the gps to work. I am trying to get the radio side to work now. Question, is the TTII mic/audio the same for...
Mike, I think everyone is at Dayton this weekend. Here is what I know; PicPac is a development platform that does have the capabilities of the TTII in...
Ok, did not know it was still in the development mode. Know i know why alot of things don't work and why i was having so much trouble making it work. I did...
I just built the picpac that I bought at Dayton. It seems to work. Too late for any signals. But, I can't find any information about what the 3 buttons do....
... Yes there was, but I haven't tracked down exactly what part caused it. The LCD is broken, you will need another one... My guess is that the resistor pack...
The buttons can be programmed for different uses. In the Diagnostic program, they display and send 1 and 2, and beep. In the Decode program, they do nothing....
hey all... bought a picpac and a tinytrakIII at dayton put both together.. the picpac worked for about an hour.. now i have no display.. otherwise its ok from...
I also had a problem with my display. It turned out to be the resistor pack on the back side of the display board. Check the resistance between each of the...
Is there any way we could get the C source code for decode1 posted? I'm doing all my development in C and this and the tracking code are the only major pieces...
thanks Mark , found 2.5meg between the same pins.. running to radioshack tonight Pete ... From: kb9khm To: picpac@yahoogroups.com Sent: Tuesday, May 20, 2003...
... As I said earlier, I haven't had the time to check anything other that try a new LCD. Guess what? Pins 3-4 on the resistor pack are open. I think we are on...
This is for Byon or anyone else who might know the answer: I'd like to add an EEPPROM to my PICPAC and need to know what EEPROM the circuit was designed for....
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
