Resetting Epson Chip Printers for free. Resetting Epson Chip Printers for
free.
Yes, there is software out there that will allow you to reset your Epson Chip
printers.

Before we go and give you the link we first want you to understand a few
things:

1. This software is a very poweful piece of software and should not be used
without first reading the accompanied instructions.

2. We have no stake in this software and there is no finacial benefit for our
recommending it. We do recommend it because it is out there and works . We are
in the ink business, not the chip reset business. Any way we can make it easier
for you to refill benefits us greatly

3. Due to some recent architecure changes in chip design some printers can not
have their chip reset with the softwa, but the software will allow you to store
the values of a full status. If this alternative does not fufill your needs we
do have available chip resetters by request.

SSC Service Utility download http://service-epson.blogspot.com







Reset Ink Counter/Level Canon iP1000

Here's some tips for your Canon Pixma IP1000. I have two IP1000 printer, one is
broken because the head need to be replaced, but the other is still powerful. I
like this printer because the simple operational
the low budget, the one that I like most is the fast printing.
The problem that I have when using this printer is when the ink waste absorber
is full, and he start to blink. Ok guys, Here's some tips for you who still use
this printer.

How to physically change the ink waste absorber? Pixma ip1000
The waste ink absorbers can be found at the bottom of the printer case.
Normally you'll have to open the printer case, loose the screws of the print
unit and remove the hole print unit from the lower part of the printer case.

4 step to Reset waste ink tank counter CANON PIXMA iP 1000
STEP 1:- Disconnect printer from AC power
STEP 2:- Press and HOLD the POWER button, and connect printer to AC power
STEP 3:- release the the POWER button
STEP 4:- Press the POWER button again

If your IP1000 Blinking try this Tips :
Step 1: Manual for Service mode
1. Unplug POWER and USB cables.
2. Open door, PRESS and HOLD the POWER button.
3. Connect the POWER cable.
4. Close door, then release POWER button.
5. Power ON your printer a usual (It should not blinking anymore)

Step 2 : Software for Permanant
1. Reconnect the USB cable and turn ON your Printer
2. Open "General Tools for iP1500", Downloadh The Software here
3. Select (USB PORT)
4. Choose CLEAR WASTE INK COUNTER - MAIN
5. Choose CLEAR WASTE INK COUNTER - PLATEN
It should be working, coz my printer now work normally

Notes. Before you decide to reseting the waste ink counter, you should really
clean up the ink absorber, or else you will find the ink watse absorber
overflow...
download sofware adjustment program epson http://service-epson.blogspot.com
http://resetprint.blogspot.com




[Non-text portions of this message have been removed]