We have moved to Haines. After 13 years in the east remanufacturing
toner cartridges for Laser printers and copiers we have opened Alaska
Laser Supply here in Haines. You can call us at 907-766-2324 or write
Box 55 Haines, AK. 99827. Call for avaliability and best price.

I have an Ibm infoprint 32 that I would like to add a port on.When I put the IP
address on the internet line I get a screen that will let me do it,but it is
asking for user & password.Does anybody know what this is or where it is or what
the default is?

[Non-text portions of this message have been removed]

I need to upgrade a formatter bd. on an HP 8000, and I have never done
that before. Any tips or instructions on how to do it.I
have a manual, but don't see it in there. I will check again.
Thanks
Jack

I am considering purchasing a Xerox Phaser 7400 instead of another
color laser printer.  I have no experience with the Phasers and wonder
if it's a good buy or not.  I only have lots of HPs and I am more than
happy with them but am looking for something a bit better.  Does
anyone have experience with this printer?  Is it better than a laser
printer?  Can parts be gotten easily if needed?  Any other information
would be greatly appreciated.  Thanks for your help in advance.

Kathy Ferrell

Hi i buy a kit for lj2420 in depot, buy i dont have the code to reset
the maintenence counter, please help me to reset that counter.

My HP 2550 Laser jet printer's carousel rotates fine, but shows magenta
toner as " out" even with a new cartridge installed. Anyone encountered
this problem ? Advice please :o)

A while back I bought this printer off of eBay.  I just now got around
to purchasing a toner cartridge for it.  After inserting the new
cartridge the Error light on the front panel stays on and the Low
Toner light flashes.  Is there something else wrong with the printer
that's causing the light to flash.

Thanks,
Jim K.

I need a transfer roller for my IBM Infoprint 1116.  Does anyone know
where I can find one, how much they cost, and what the part number is
for the roller.

Thanks,
Jim K.

The 13.05.00 error indicates a jam in the top cover area (the exit
area).  This can also be triggered by paper not arriving at the fuser
or past that in time.

Check all the path AFTER the point the paper stopped at.

- Paul L.


--- In printerrepair@yahoogroups.com, "Mark" <markymarx66@...> wrote:
>
> I have a customer with a Laserjet 4250, when feeding from tray 1 I
get
> a paper jam (13.05.00) leading edge of paper stops just before the
> transfer roller. Feeding from Trays 2 and 3 there's no problems. I
> tried changing Tray 1 feed Assembly and the problem continues. Any
> suggestions?
>

Is anyone here still interested in the oldies or do they have no value
anymore?  We have been using & supporting them for years but most
customers want something faster nowadays. We have 1 to 4 of each
depending on model, I hate to send them to a land fill but I have very
little need for them anymore.

According to the Service Manual for that printer ...

--- (Quote) ---
A printer command error occurred, which indicates a problem between
the Formatter PCA and the print engine.
xx = error code:
01 =Unable to bring up the engine
02 =Excessive noise glitches on the Printer Ready signal (PPRDY)
03 =Printer Ready signal (PPRDY) was lost
04 =No response to a signal communicate request
05 =Engine reporting different source and/or destination than was
selected by the Formatter PCA
06 =Unable to synchronize the engine serial communications
07 =Serial receive parity error
08 =Serial transmit parity error
09 =Missed a serial communication interrupt
10 =Serial communication is hung
11 =Lost a serial communication extended interrupt request (XISR)
12 =Invalid communication timeout error
13 =Serial communication delayed

Recommended Action:
Cycle power. If the error continues, check the Formatter seating into
DC Controller. Ensure no pins are bent. Reseat or replace the cable
from the DC Controller and the Laser/Scanner Assembly. Replace the
Laser/Scanner Assembly. Replace the DC Controller PCA. Replace the
Formatter PCA. Note: These connections may appear to be correct, but
if the problem persists, reseat cable connections making sure they are
properly connected.
--- (End Quote) ---

Hope that helps?
- Paul L.


--- In printerrepair@yahoogroups.com, Derik Cree <dcree33@...> wrote:
>
> Esteemed Colleagues,
>  
> I have a perplexing problem with a Hp5si. It seems to keep dropping
communication or something. It will print fine for the first few jobs
after it gets turned on and then it will get stuck in a processing
job mode and do nothing 'till it gets rebooted. I have tried a
different jetdirect card and another formatter with no luck. To make
matters worse after the formatter swap, it will now stay in the ready
mode but just not print until a reboot is done, but the jobs go
through the queue like they make it to the printer so when you reboot
any jobs sent while it was stuck in limbo are lost. I have never seen
such an issue and it's becoming quite confusing, has anyone else ran
into this? I did notice a 50.03 error a couple thousand pages ago on
the error log so I was thinking of swapping out the fuser and
removing the duplexer just to see if that helps, although I did try
removing the duplexer before the JD card swap and that didn't seem to
make any
>  difference. Basically I am just pulling at straws at this
point........The last 2 errors in the log were 55.03F1 and 55.032A,
the 55 errors seems to point to a communications problem. I could
also try the DC Controller? Any help would be appreciated, and I
thank you in advance.......
>  
> Derik
>
>
>
______________________________________________________________________
______________
> Be a better friend, newshound, and
> know-it-all with Yahoo! Mobile.  Try it now.
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ
>

Reset Printer Canon and Manual service
Dear all reseter's

This is How to Reset Canon Pixma iP 2000 :
http://rapidshare.com/files/82936240/Pixma_iP2000.zip
Printer Xnu i550 i850 i950
http://rapidshare.com/files/82937173/xnu_i550_i850_i950_SM.zip
Printer xnu i450
http://rapidshare.com/files/82937427/xnu_i450_SM.zip


reset canon

Reset canon i255 i355
Reset canon iP1000
Reset iP1500 canon
manual service canon iP2000 resetter
resetI250-I350
Reset_i320
Download : http://rapidshare.com/files/84970258/resetprint.zip
http://indoresetter.blogspot.com/2008/01/reset-printer-canon-and-manual-service.\
html
http://resetprint.blogspot.com





[Non-text portions of this message have been removed]

Hello, I have an Epson printer R320 that I love until today when it would not
print and came
up with a service message.  Anyone else ever have this problem.  I called  epson
and they
said it was the ink pads that need to be replaced which could be expensive. Has
anyone ever
serviced their own machine.  thanks Cathy

Resetting Epson Chip Printers for free.   Resetting Epson Chip Printers for
free.
  Yes, there is software out there that will allow you to reset your Epson Chip
printers.

  Before we go and give you the link we first want you to understand a few
things:

  1. This software is a very poweful piece of software and should not be used
without first reading the accompanied instructions.

  2. We have no stake in this software and there is no finacial benefit for our
recommending it. We do recommend it because it is out there and works . We are
in the ink business, not the chip reset business. Any way we can make it easier
for you to refill benefits us greatly

  3. Due to some recent architecure changes in chip design some printers can not
have their chip reset with the softwa, but the software will allow you to store
the values of a full status. If this alternative does not fufill your needs we
do have available chip resetters by request.

  SSC Service Utility download http://service-epson.blogspot.com







   Reset Ink Counter/Level Canon iP1000

  Here's some tips for your Canon Pixma IP1000. I have two IP1000 printer, one is
broken because the head need to be replaced, but the other is still powerful. I
like this printer because the simple operational
  the low budget, the one that I like most is the fast printing.
  The problem that I have when using this printer is when the ink waste absorber
is full, and he start to blink. Ok guys, Here's some tips for you who still use
this printer.

  How to physically change the ink waste absorber? Pixma ip1000
  The waste ink absorbers can be found at the bottom of the printer case.
  Normally you'll have to open the printer case, loose the screws of the print
unit and remove the hole print unit from the lower part of the printer case.

  4 step to Reset waste ink tank counter CANON PIXMA iP 1000
  STEP 1:- Disconnect printer from AC power
  STEP 2:- Press and HOLD the POWER button, and connect printer to AC power
  STEP 3:- release the the POWER button
  STEP 4:- Press the POWER button again

  If your IP1000 Blinking try this Tips :
  Step 1: Manual for Service mode
  1. Unplug POWER and USB cables.
  2. Open door, PRESS and HOLD the POWER button.
  3. Connect the POWER cable.
  4. Close door, then release POWER button.
  5. Power ON your printer a usual (It should not blinking anymore)

  Step 2 : Software for Permanant
  1. Reconnect the USB cable and turn ON your Printer
  2. Open "General Tools for iP1500", Downloadh The Software here
  3. Select (USB PORT)
  4. Choose CLEAR WASTE INK COUNTER - MAIN
  5. Choose CLEAR WASTE INK COUNTER - PLATEN
  It should be working, coz my printer now work normally

  Notes. Before you decide to reseting the waste ink counter, you should really
clean up the ink absorber, or else you will find the ink watse absorber
overflow...
download sofware adjustment program epson http://service-epson.blogspot.com
http://resetprint.blogspot.com




[Non-text portions of this message have been removed]

I have a customer with a Laserjet 4250, when feeding from tray 1 I get
a paper jam (13.05.00) leading edge of paper stops just before the
transfer roller. Feeding from Trays 2 and 3 there's no problems. I
tried changing Tray 1 feed Assembly and the problem continues. Any
suggestions?

Stephane;
  Please email me, I lost your address in the crash.

Thanx,
Paul

______________________________________________________

Want to Fix Something?
http://www.manuals4you.com

Need a manual NOW?
http://www.justmanuals.com



[Non-text portions of this message have been removed]

Hello All,

I have to change the pressure roller of the hp M1005 fuser (PN RM1-
3952). Is anyone aware of which machone pressure roller is compatible
with this fuser unit?

Thanks a lot

Regards

Leo
Owner
Salience Brasil
+55 (11) 5063-2805
leo@...
São Paulo - SP
Brazil

Esteemed Colleagues,
 
I have a perplexing problem with a Hp5si. It seems to keep dropping
communication or something. It will print fine for the first few jobs after it
gets turned on and then it will get stuck in a processing job mode and do
nothing 'till it gets rebooted. I have tried a different jetdirect card and
another formatter with no luck. To make matters worse after the formatter swap,
it will now stay in the ready mode but just not print until a reboot is done,
but the jobs go through the queue like they make it to the printer so when you
reboot any jobs sent while it was stuck in limbo are lost. I have never seen
such an issue and it's becoming quite confusing, has anyone else ran into this?
I did notice a 50.03 error a couple thousand pages ago on the error log so I was
thinking of swapping out the fuser and removing the duplexer just to see if that
helps, although I did try removing the duplexer before the JD card swap and that
didn't seem to make any
  difference. Basically I am just pulling at straws at this point........The last
2 errors in the log were 55.03F1 and 55.032A, the 55 errors seems to point to a
communications problem. I could also try the DC Controller? Any help would be
appreciated, and I thank you in advance.......
 
Derik


      
________________________________________________________________________________\
____
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile.  Try it now. 
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

It would print a real light blue that should of been
> > black. Then the next print would be back to no black just the
colors.


That's the printhead - I had my canon 820 do the same thing - replaced
the tanks with no change, i replaced the printhead and problem solved.

Have you tried to replace the formatter board?

David
--- jdsm48 <jdsm48@...> wrote:

> HP 5500N, display showed two lines of "asterisks".
> Was told
> to replace Flash memory,(C9712-67922), when I did
> this,
> display went blank, put "old" flash memory " in,
> still
> nothing. Was told next to replace DC controller
> bd.,same results.
> Any ideas? I have done an engine test and no
> results.
> Control panel? Any tests to verify?
> Thanks
>
>



      
________________________________________________________________________________\
____
Be a better friend, newshound, and
know-it-all with Yahoo! Mobile.  Try it now. 
http://mobile.yahoo.com/;_ylt=Ahu06i62sR8HDtDypao8Wcj9tAcJ

--- In printerrepair@yahoogroups.com, "drotar" <rdrotar@...> wrote:
>
> Need maint. & parts manual for IBM 6252 line printer...can any help?
>
>
> [Non-text portions of this message have been removed]
>


Did you ever locate a manual for this????  I'm in need of one myself
and my search turned up your request in June '04 ....

Looking for a service manual on one of these. Paul, you have one of
these in the archives? I looked, but may be blind.....

Thanks...

Try removing the NIC card.  This is common with bad cards.

I read you replaced the ink tank, but you may need to replace the printhead. I'm
not familiar with this model. I can remember when I used to get Canon inkjets
into the shop for the same issues you're having and they were 1.5 to 2 years old
with much use. Replacing the printhead solved the problem I'd say 98% of the
time and the other 2% had a real hardcore error not worth fixing. It sounds like
the  printhead in this model is user replaceable and I'm suprised Canon didn't
recommend it. If it's like it was back then, when you buy the printhead, it will
also come with each ink tank. It may be costly, but unless the tech has one that
is in good shape to test with, then I believe that's your only option, other
than buying a new printer as you sugested.

----- Original Message -----
From: Vicki <imfishing2day@...>
Date: Thursday, March 27, 2008 8:56 am
Subject: [Laser Printer Repair] not printing black
To: printerrepair@yahoogroups.com

> Hi
> I have a canon pixma MP500. It was printing just fine and then the
> big
> black tank quit working. I got a new tank, but that didn't do
> anything, I emailed canon and they
> had me take out the tanks and then the print head, then put it back
> together and turn off and unplug for 30 seconds. Then plug back in
> and deep clean. It would print a real light blue that should of been
> black. Then the next print would be back to no black just the colors.
> They told me it needed to be taken to a shop.
>
> Do you know what else I could try or am I doomed to be buying
> another printer, because it will probably cost more to fix than to
> buy a new one.
> What do you think.
> Thanks for any help.
> Vicki
>
>
>
>
>


[Non-text portions of this message have been removed]

I'm not sure what you mean by a cartridge for printing labels.  Do the
labels print OK with the original cartridge?  If not, it may be the
labels.  Also try the new cartridge with standard paper to verify
print quality.

I'm geeting blank pages and errors 54.11,12,13,14.
I'm inclined to replace the high voltage power supply but with these
numerical errors, it mentions the color registration detection assy.
Can anyone steer me in the right direction?

Was working on a HP CLJ 5500 ,when I got to the call, was
just "flashing" 2 rows of asterisks in the display.
Was told it needed  "Compact Flash Firmware", When I went back,
did that,now display is "blank,dark",.Machine turns on,makes all the
normal sounds,etc, but no display, even after reinstalling
the original flash memory Dimm back in.
Can the formatter bd. be causing this, or any other ideas to try.
I have checked the wires for connection, everything connected. Any
suggestions?
Thanks,
Jack

HP 5500N, display showed two lines of "asterisks". Was told
to replace Flash memory,(C9712-67922), when I did this,
display went blank, put "old" flash memory " in, still
nothing. Was told next to replace DC controller bd.,same results.
Any ideas? I have done an engine test and no results.
Control panel? Any tests to verify?
Thanks

Hello,

I have a Lemxark T620 and I need to print a bunch of labels with it.
So I purchased a few 12A6360 cartridges.  Which are supposed to be for
printing labels.  They print okay but are very light.  All lot lighter
than the prints I was getting with the 12A6865 cartridge that I had in
before.

Any suggestions?

Thank you

Hello, Experts
I am having an issue with a HP2420, after the user replaced an expired toner now
the printer will only print an image on 2/3 of the right side of the page or
there abouts. I tried swapping toner but no help, I then checked the contacts
and the transfer roller (including the 2 springs underneath) and they all seemed
good. I cleaned the printer out the best I could and tried to clean the window
for the scanner and then by putting in the first toner I was able to get it to
start printing the whole page. Well that was yesterday and now today it is
printing so faint that the user can't read it.....I was thinking either the HVPS
or scanner, but couldn't figure out why it would all of a sudden start this
right after a toner replacement. So I figured it must have to do with some kind
of a contact for the toner or transfer roller, but can't really see anything
obvious. I haven't had any experience with this model before now, although we
have 4 on hand, but have
  never had any issues with them. Does anyone have any experience with this
particular issue on this printer? I am open to any suggestion. Thanks for you
help

Derik


      
________________________________________________________________________________\
____
Never miss a thing.  Make Yahoo your home page.
http://www.yahoo.com/r/hs