I once had this problem with an 8000 - it was the wrong duplexer ... [mailto:printerrepair@yahoogroups.com] ... always jam ... first ... then I ... good one ...
I have had duplexer problems with both 8000s and 8150s. Fortunately, there have been enough of them (printers) in this customers company to try swapping...
Back when I was working with John Galusha, we found that the issue had to do with certain duplexers not working well with certain fusers, which is why we would...
I made sure that wasn't the case by taking a known good duplexer out of another 8150, I am going to try the same thing with the fuser, maybe the new one is...
Well I have tried a different duplexer, I actually ordered a new one(refurbed I'm sure) and tried that one and it didn't work either. I put the new one in...
I've had this in both HP5Si and HP8100/8150's. Probably failed DC controller. Kent As previously mentioned, you should NOT!!! remove or install (especially...
I've seen duplexer to fusers causing this. I have one 5si fuser that cannot go into a duplexed 5si. There was a write up about this issue some time ago. Wish...
I use plain old lighter fluid - solvent enough to remove the ink and oily enough not to cause drag. Then I use 3in1 oil from the backside of the jewel and run...
Customer had an HP CLJ 8550 running on a Macintosh Network - printed brochures beautifully. Customer upgraded to an HP CLJ 9500 - same brochures - color lousy...
Friends, I found some of the very useful (free) magazines on net.. For computer, telecom, electronics,Business, photonics, chip, offshoring and what not,...
Well *finally* the friggin thing is done. Found a service station kit on ebay new old stock and on site I installed. Still the 070000 0000001 error when the...
I'm starting to see some fusers for the HP 9050 series printer starting to develop flat spots on the bottom roller of the fuser ass'y similar to what happen to...
Hello, Could you please give us a better address to go to on the magazines. Thanks Cherie' ... computer, telecom, electronics,Business, photonics, chip,...
Customer has a CLJ3500 with the message: 10.92.03 toner cartridge not engaged. Has anyone seen this? I check the toner contact on the left side frame and...
I must be blind. Go where ? Please use http://support.unbc.ca to request service <http://www.unbc.ca> Dale Laluk Technical Support Specialist University of...
Ahhh, the lovely 49 error code when using the fax on a MFP. This has been HP's blue screen of death. Here is my solution to help reduce the number of errors...
Can I ask where it jams at? Depending on where it jams, it could be something OTHER than the duplexor or the fuser. Dustin ... always jam when the duplexer is...
Hi, I'm new to this group so pardon any ignorance on my part... thanks. I have an HP R40 deskjet all-in-one unit which has done a super job for several years....
There are no service guides, HP is nice enough to keep those internal. You need to clean the scanner, same as doing the G85. Lift the scanner cover and remove...
Wow ! I thank you very much for such a detailed and complete step by step procedure to work on the problem !! This will really be my first attempt to repair a...
I received an Oki B6500 to test for possible use vs. HP 4350 today however I am having a problem with it. When I print to the printer it handles the images /...
The scanner "module" itself is the black enclosure that is moved back and forth and is part number C6688-60003 and the scanner assembly is usually referred to...
This doesn't sound like a driver issue, unless you are PC faxing. It sounds as though the fax settings are bad or wrong. I am not familiar with that...
OK, if replacing the duplexor and the fuser hasn't helped.... Try the diverter assembly. At least I think that is what it is called. It is the gear assembly...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
