Thanks Mike that worked perfectly. That zip file with the readme
should go up on the Reloaded web page instead of the package that
doesn't work.

Only thing is it wouldnt let me use my old screen names and I had to
make up a new name. It was saying my old names were "already in use"
when I tried to type them in. Any way to get back to my old names?
Thanks for all the help!
Bob


--- In qlinkreunion@yahoogroups.com, "k2hjc" <k2hjc@...> wrote:
>
> Sorry abt that I didnt know you were using the Package for Qlink
thats
> out there Its a little dated and I have that setup as well and it
> didnt work for me I uploaded another zip with everything that does
> work BUT no easy 1 click connect but not hard either I put a Readme
> file in there Im no good at those but I tested the files and it
> connected to Qlink
>
>
> --- In qlinkreunion@yahoogroups.com, "freakezoid2" <freakezoid@>
wrote:
> >
> > Totally lost me there. I'm double clicking on a file
> > named "qlink.bat" which autostarts the emulator then jumps right
to
> > the "NOW LOADING---PLEASE WAIT" screen. The next thing that
happens
> > is the previous described screen below, "type commands to the
> > modem"... etc. I can double click the x64.exe file to start the
> > emulator alone, but where would I find a "change access" file? If
I
> > type LOAD "CHANGE ACCESS",8,1 it returns a "file not found"
error,
> > obviously. I'm not using a real Commodore computer, there's no
disk
> > or disk drive hooked up. I'm using a PC.
> >
> >
> > --- In qlinkreunion@yahoogroups.com, "k2hjc" <k2hjc@> wrote:
> > >
> > > On the QLINK d64 image DONT boot it look for a file called
CHANGE
> > > ACCESS on the image and Load "Change Access",8,1 make sure True
> > drive
> > > emulation is checked in the options menu of vice
> > >
> > > and when it loads hit enter on the 1st menu option for change
access
> > > settings
> > >
> > > Select change modem type and choose Other Command Driven modems
> > > Then select change modem speed to 1200
> > > Phone type Tone
> > > and enter for a phone number +5551212 (just a dummy number but
is
> > > needed Remember the + sign preceding the number)
> > >
> > >
> > > Then when all thats done highlight sign on to qlink
> > >
> > > should work
> > >
> > > --- In qlinkreunion@yahoogroups.com, "freakezoid2"
<freakezoid@>
> > wrote:
> > > >
> > > > Thanks for the file. I downloaded it and got it in the
Winvice
> > > > folder. Unfortunately, it still isn't connecting. I get to
the
> > > > screen "Type commands to the modem, then press F1 when
connection
> > is
> > > > made". I press F1 and it says "Connecting - ", and then the
> > dashes
> > > > never move it just sits there forever with one dash. I double
> > checked
> > > > all the RS232 userport and device settings and they are all
> > correct.
> > > >
> > > > No clue whats wrong. Thanks for all your help. Let me know if
you
> > > > think of anything else please. Or anyone else perhaps.
> > > >
> > > >
> > > > --- In qlinkreunion@yahoogroups.com, "k2hjc" <k2hjc@> wrote:
> > > > >
> > > > > Gotcha I saw the site was down I have the right X64 file I
use
> > (It
> > > > has
> > > > > a Jiffydos fix attatched works nice)
> > > > >
> > > > > If you want I can email the file or upload it here on the
group
> > if
> > > > its
> > > > > not already
> > > > >
> > > > > Take care
> > > > > Mike
> > > > >
> > > > > MikeAZ1 on Qlink and IRC
> > > > >
> > > > > -- In qlinkreunion@yahoogroups.com, "freakezoid2"
<freakezoid@>
> > > > wrote:
> > > > > >
> > > > > > Those numbers were already in there, as were the other
> > settings
> > > > > > displayed on the web page of Reloaded.
> > > > > >
> > > > > > I think the problam may be the x64.exe file that the web
page
> > > > says to
> > > > > > download and save to the WinVice folder - I can't get
that
> > file,
> > > > the
> > > > > > web page "cannot be found".
> > > > > >
> > > > > >
> > > > > >
> > > > > > --- In qlinkreunion@yahoogroups.com, "k2hjc" <k2hjc@>
wrote:
> > > > > > >
> > > > > > > Its 66.135.38.238 port 5190
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --- In qlinkreunion@yahoogroups.com, "freakezoid2"
> > > > <freakezoid@>
> > > > > > wrote:
> > > > > > > >
> > > > > > > > I haven't a clue. When I last used this a couple of
years
> > ago
> > > > it
> > > > > > just
> > > > > > > > worked right away no problem.
> > > > > > > >
> > > > > > > >
> > > > > > > > --- In qlinkreunion@yahoogroups.com, John Baker
> > <slctrucker@>
> > > > > > wrote:
> > > > > > > > >
> > > > > > > > > Yep. gotta change the IP address or something in
the
> > > > program.
> > > > > > What
> > > > > > > > was the address change? Anyone? Anyone? Beuler?
Beuler?
> > > > > > > > >
> > > > > > > > > ---------------------------------
> > > > > > > > > Looking for last minute shopping deals? Find them
fast
> > > > with
> > > > > > Yahoo!
> > > > > > > > Search.
> > > > > > > > >
> > > > > > > > > [Non-text portions of this message have been
removed]
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>