I did discover that the QLINK.exe package does work if you change the
IP address under RS232 Settings before trying to connect I tryed that
and it connected nice

Mike


--- In qlinkreunion@yahoogroups.com, "freakezoid2" <freakezoid@...> wrote:
>
> Thanks Mike that worked perfectly. That zip file with the readme
> should go up on the Reloaded web page instead of the package that
> doesn't work.
>
> Only thing is it wouldnt let me use my old screen names and I had to
> make up a new name. It was saying my old names were "already in use"
> when I tried to type them in. Any way to get back to my old names?
> Thanks for all the help!
> Bob
>
>
> --- In qlinkreunion@yahoogroups.com, "k2hjc" <k2hjc@> wrote:
> >
> > Sorry abt that I didnt know you were using the Package for Qlink
> thats
> > out there Its a little dated and I have that setup as well and it
> > didnt work for me I uploaded another zip with everything that does
> > work BUT no easy 1 click connect but not hard either I put a Readme
> > file in there Im no good at those but I tested the files and it
> > connected to Qlink
> >
> >
> > --- In qlinkreunion@yahoogroups.com, "freakezoid2" <freakezoid@>
> wrote:
> > >
> > > Totally lost me there. I'm double clicking on a file
> > > named "qlink.bat" which autostarts the emulator then jumps right
> to
> > > the "NOW LOADING---PLEASE WAIT" screen. The next thing that
> happens
> > > is the previous described screen below, "type commands to the
> > > modem"... etc. I can double click the x64.exe file to start the
> > > emulator alone, but where would I find a "change access" file? If
> I
> > > type LOAD "CHANGE ACCESS",8,1 it returns a "file not found"
> error,
> > > obviously. I'm not using a real Commodore computer, there's no
> disk
> > > or disk drive hooked up. I'm using a PC.
> > >
> > >
> > > --- In qlinkreunion@yahoogroups.com, "k2hjc" <k2hjc@> wrote:
> > > >
> > > > On the QLINK d64 image DONT boot it look for a file called
> CHANGE
> > > > ACCESS on the image and Load "Change Access",8,1 make sure True
> > > drive
> > > > emulation is checked in the options menu of vice
> > > >
> > > > and when it loads hit enter on the 1st menu option for change
> access
> > > > settings
> > > >
> > > > Select change modem type and choose Other Command Driven modems
> > > > Then select change modem speed to 1200
> > > > Phone type Tone
> > > > and enter for a phone number +5551212 (just a dummy number but
> is
> > > > needed Remember the + sign preceding the number)
> > > >
> > > >
> > > > Then when all thats done highlight sign on to qlink
> > > >
> > > > should work
> > > >
> > > > --- In qlinkreunion@yahoogroups.com, "freakezoid2"
> <freakezoid@>
> > > wrote:
> > > > >
> > > > > Thanks for the file. I downloaded it and got it in the
> Winvice
> > > > > folder. Unfortunately, it still isn't connecting. I get to
> the
> > > > > screen "Type commands to the modem, then press F1 when
> connection
> > > is
> > > > > made". I press F1 and it says "Connecting - ", and then the
> > > dashes
> > > > > never move it just sits there forever with one dash. I double
> > > checked
> > > > > all the RS232 userport and device settings and they are all
> > > correct.
> > > > >
> > > > > No clue whats wrong. Thanks for all your help. Let me know if
> you
> > > > > think of anything else please. Or anyone else perhaps.
> > > > >
> > > > >
> > > > > --- In qlinkreunion@yahoogroups.com, "k2hjc" <k2hjc@> wrote:
> > > > > >
> > > > > > Gotcha I saw the site was down I have the right X64 file I
> use
> > > (It
> > > > > has
> > > > > > a Jiffydos fix attatched works nice)
> > > > > >
> > > > > > If you want I can email the file or upload it here on the
> group
> > > if
> > > > > its
> > > > > > not already
> > > > > >
> > > > > > Take care
> > > > > > Mike
> > > > > >
> > > > > > MikeAZ1 on Qlink and IRC
> > > > > >
> > > > > > -- In qlinkreunion@yahoogroups.com, "freakezoid2"
> <freakezoid@>
> > > > > wrote:
> > > > > > >
> > > > > > > Those numbers were already in there, as were the other
> > > settings
> > > > > > > displayed on the web page of Reloaded.
> > > > > > >
> > > > > > > I think the problam may be the x64.exe file that the web
> page
> > > > > says to
> > > > > > > download and save to the WinVice folder - I can't get
> that
> > > file,
> > > > > the
> > > > > > > web page "cannot be found".
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --- In qlinkreunion@yahoogroups.com, "k2hjc" <k2hjc@>
> wrote:
> > > > > > > >
> > > > > > > > Its 66.135.38.238 port 5190
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --- In qlinkreunion@yahoogroups.com, "freakezoid2"
> > > > > <freakezoid@>
> > > > > > > wrote:
> > > > > > > > >
> > > > > > > > > I haven't a clue. When I last used this a couple of
> years
> > > ago
> > > > > it
> > > > > > > just
> > > > > > > > > worked right away no problem.
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --- In qlinkreunion@yahoogroups.com, John Baker
> > > <slctrucker@>
> > > > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > Yep. gotta change the IP address or something in
> the
> > > > > program.
> > > > > > > What
> > > > > > > > > was the address change? Anyone? Anyone? Beuler?
> Beuler?
> > > > > > > > > >
> > > > > > > > > > ---------------------------------
> > > > > > > > > > Looking for last minute shopping deals? Find them
> fast
> > > > > with
> > > > > > > Yahoo!
> > > > > > > > > Search.
> > > > > > > > > >
> > > > > > > > > > [Non-text portions of this message have been
> removed]
> > > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>