Hi Colin,

The four steps for installing the QX3 with Vista are listed below. Have fun.

Best regards,
Mark

Instruction for installing the QX3 or QX3+ Microscope with Vista

Note, DO NOT use the software from the CD that came with the microscope.

DO NOT plug in the QX3 microscope until Step 4.

Step 1. Install the QX3PLUS.EXE software downloaded from Intel:

http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&Inst=Yes&ProductID=160&Dw\
nldID=4419&strOSs=All&OSFullName=All%20Operating%20Systems〈=eng


Step 2. Download and install the QCODINSTL.EXE software from:

http://www.intel.com/support/intelplay/qx3/sb/cs-016002.htm

Step 3. Download and extract the QX3 Drivers from:
http://hyperslug.s3.amazonaws.com/IntelQX3driverXP.zip


Step 4. Now, plug in the microscope.

When the "Found New Hardware" wizard appears, select "Locate and install driver
software (Recommended)", a message "Installing device driver software" will
appear. If you click on "details", you will see "Searching Windows Update",
after a while you will be able to select "I don't have a disc. Show me other
options" and browse to the folder with the extracted QX3 drivers from Step 3.
above. The hardware should install successfully.

Double-click on the QX3+ icon on the desktop and the program should run.
------





________________________________
From: Colin Huller <colinthecog2003@...>
To: qx3@yahoogroups.com
Sent: Saturday, March 28, 2009 11:29:04 AM
Subject: [QX3] QX3 & Vista


Hi there guys, Im in the UK, and have just got a laptop with Vista.
My question is - I have downloaded the files from this group for vista, but what
do I do next - put the old disc in? and then what?
could do with a step by step guide please - Im getting withdrawl symptoms!
Thanks in anticipation
Colin







[Non-text portions of this message have been removed]