Which region is the film? I got Matrix reg2 and I have no problems at
all with the film. I have a Monyka 8200 (same as Raite 715) with
firmware 05-37.

Marcus




"f. pansier" <f.pansie-@...> wrote:
original article:http://www.egroups.com/group/raite-dvd/?start=30
> By playing the movie, the player skips three times a scene of 2-3
> minutes.
> I haven't checked my firmware version, but do you think that when I
> make an update that I see the movie correct?
> My player is an Raite AVPhile 715
>

By playing the movie, the player skips three times a scene of 2-3
minutes.
I haven't checked my firmware version, but do you think that when I
make an update that I see the movie correct?
My player is an Raite AVPhile 715

"dinesh jagroep" <dinesh_jagroe-@...> wrote:
original article:http://www.egroups.com/group/raite-dvd/?start=16
> I get the "M" displayed, but macrovision is still there. I have
> firmware 5.37 and I have a Raite 713
>
> I tried to record a sample of Starship Troopers RegionCode 2. But the
> colors where messed up ;-(
>
> I have a panasonic VCR.
>
> Did you guys checked the macrovision and really tried to record a
movie
> on VHS?
>
> Thanx,
>
> Dinesh

Hi Dinesh,

When you see the  in the upper left corner you have to push the STOP
button on you remote contol to disable the Marcro-Vision. After that
play the movie it will work! I foud out that after powerdown of the
player the MV wll be activaed again !

Enjoy,
ToM
>
> "marcus bjarsholm" <kingarn-@...> wrote:
> original article:http://www.egroups.com/group/raite-dvd/?start=2
> > You'll have to do it over again everytime you powered-off the
machine.
> >
> >
> > "marcus bjarsholm" <kingarn-@...> wrote:
> > original article:http://www.egroups.com/group/raite-dvd/?start=1
> > > Stop the film 2x STOP. Then press "setup", "slow", "skip right"
and
> > > "pause". Now there will be a "M" in the upper left corner and the
> > > macrovision is disabled.
> > >
> > >
> >
>

Hi!

Anyone could please post a description of how to sucessfully burn a
firmware update Cd in Easy CD creator for instance? Is it just to burn
the two files with the joliet format and keep the filenames intact?

Best Regards
   Igor Berg Mogielnicki

Hi there,

I've got a yakamawa 715 with firmware 3c. unfortunately they skipped
the option to change the regio-code in this firmware or did they only
change the key's you have to press???
Does anyone know a possibility to change the regio-code te regio free??
Maybe there is a possibility to "update" an older firmware-version like
5-23 where it was still possible to change the regio-code??
Where can I get older firmware versions???
Thanx for help

I have a very annoying problem with my Tokai player: the background
colors in most scenes (e.g. The Matrix Z2, Meat Loaf Classic Albums)
seems to be shifting color all the time: green for instance will change
into dark green-medium green-light green continuously.

The player+tv in the store didn't have this problem.

This has been identified as the "Masseproblem" or something in German,
but my German isn't good enough to really understand what it is all
about. Can anybody here help me out?

I tried the Firmware as described but i get an error message

Bad passwd for model..

Please help

I have the Kiss DVD 1502.

cheers mate.

"marcus bjarsholm" <kingarn-@...> wrote:
original article:http://www.egroups.com/group/raite-dvd/?start=23
> Press "setup", "slow", "skip left", "skip right". In the upper left
> corner you will see *-*. Choose region with "left arrow" or "right
> arrow". (*=regionfree, A=region1, B=region2, C=region3 and so on).
> After you have chosen the region press "setup".
>
> Marcus
>
>
>
> "angelo carlesimo" <ang-@...> wrote:
> original article:http://www.egroups.com/group/raite-dvd/?start=22
> > can region coding be cancelled on 713-k players.
> >
>

Press "setup", "slow", "skip left", "skip right". In the upper left
corner you will see *-*. Choose region with "left arrow" or "right
arrow". (*=regionfree, A=region1, B=region2, C=region3 and so on).
After you have chosen the region press "setup".

Marcus



"angelo carlesimo" <ang-@...> wrote:
original article:http://www.egroups.com/group/raite-dvd/?start=22
> can region coding be cancelled on 713-k players.
>

can region coding be cancelled on 713-k players.

Is there anyone that knows how to disable Macrovision on a Raite 711
with Bios B*R15PB-02 990607 ???? I`ve tried all the combinations for
Raite 713, 715 but with no results... I have heard that there is a way
but how? Is it possible to uppgrade the firmware on this model without
taking out the chip??


/Carl

I found an English version of Y-tool. Check the vault-files for
Y_tool2.rar...

http://www.egroups.com/docvault/raite-dvd/Files/Y_tool2.rar

Check out this page for updating your firmware: http://www.seditec.com/
The latest firmware are 3C for the german Yamakawa (Same player as
Raite, Monyka, Hoyo). Note that VBR mp3 is Ok!

5-3C, latest German firmware,
goods: macrovision-off OK, future upgradable from CDRs, vbr mp3 OK,
Yamakawa logo looks alot better thanRaite's
bads: default is PAL video-out, so video is all messed up until you
enter commands to make it NTSC, all regions
except US (can't play US(region 1) DVD's until someone finds a way)
unknown: Is there a US version of this '3C'?

Marcus




"johnny larsson" <johnnymnemoni-@...> wrote:
original article:http://www.egroups.com/group/raite-dvd/?start=18
> I have an early version of Monyka 8200 (raite 713) and im having
> problem with playing mp3 recordings, is there an upgrade for problems
> like that and where can I find it?
>

I have an early version of Monyka 8200 (raite 713) and im having
problem with playing mp3 recordings, is there an upgrade for problems
like that and where can I find it?

I got Philips TV and Video and it works great. I tested to copy a film
(also region 2) without any problems.

But I did have some problems with the colors when I first connected the
DVD-player to the TV. The problem was in the TV-setup. Only one of the
three Scart-contacts were able to show the SVHS (DVD-player) correct
and I was forced to make some changes in the TV's setup for that
contact. On the other scarts the picture was in Black & White.

Marcus





"dinesh jagroep" <dinesh_jagroe-@...> wrote:
original article:http://www.egroups.com/group/raite-dvd/?start=16
> I get the "M" displayed, but macrovision is still there. I have
> firmware 5.37 and I have a Raite 713
>
> I tried to record a sample of Starship Troopers RegionCode 2. But the
> colors where messed up ;-(
>
> I have a panasonic VCR.
>
> Did you guys checked the macrovision and really tried to record a
movie
> on VHS?
>
> Thanx,
>
> Dinesh
>
> "marcus bjarsholm" <kingarn-@...> wrote:
> original article:http://www.egroups.com/group/raite-dvd/?start=2
> > You'll have to do it over again everytime you powered-off the
machine.
> >
> >
> > "marcus bjarsholm" <kingarn-@...> wrote:
> > original article:http://www.egroups.com/group/raite-dvd/?start=1
> > > Stop the film 2x STOP. Then press "setup", "slow", "skip right"
and
> > > "pause". Now there will be a "M" in the upper left corner and the
> > > macrovision is disabled.
> > >
> > >
> >
>

I get the "M" displayed, but macrovision is still there. I have
firmware 5.37 and I have a Raite 713

I tried to record a sample of Starship Troopers RegionCode 2. But the
colors where messed up ;-(

I have a panasonic VCR.

Did you guys checked the macrovision and really tried to record a movie
on VHS?

Thanx,

Dinesh

"marcus bjarsholm" <kingarn-@...> wrote:
original article:http://www.egroups.com/group/raite-dvd/?start=2
> You'll have to do it over again everytime you powered-off the machine.
>
>
> "marcus bjarsholm" <kingarn-@...> wrote:
> original article:http://www.egroups.com/group/raite-dvd/?start=1
> > Stop the film 2x STOP. Then press "setup", "slow", "skip right" and
> > "pause". Now there will be a "M" in the upper left corner and the
> > macrovision is disabled.
> >
> >
>

The 3C is an German firmware and that the problem is in NTSC... There
should not be any problem if you have a Pal-TV..

Marcus




"anders erlandsson" <ncc1701-@...> wrote:
original article:http://www.egroups.com/group/raite-dvd/?start=14
> "marcus bjarsholm" <kingarn-@...> wrote:
> original article:http://www.egroups.com/group/raite-dvd/?start=13
> > I found this list of firmware on another site...
> >
>
> > 3.0C
> > bads: default is PAL video-out, so video is all messed up until you
> > enter commands to make it NTSC, all regions
> > except US (can't play US(region 1) DVD's until someone finds a way)
> > unknown: Is there a US version of this '3C'?
> >
> >
> What di you mean "except US"?? I upgraded my Monyka 8200 with Yamakawa
> software and it plays all regions like it did before.
>
>

"marcus bjarsholm" <kingarn-@...> wrote:
original article:http://www.egroups.com/group/raite-dvd/?start=13
> I found this list of firmware on another site...
>

> 3.0C
> bads: default is PAL video-out, so video is all messed up until you
> enter commands to make it NTSC, all regions
> except US (can't play US(region 1) DVD's until someone finds a way)
> unknown: Is there a US version of this '3C'?
>
>
What di you mean "except US"?? I upgraded my Monyka 8200 with Yamakawa
software and it plays all regions like it did before.

I found this list of firmware on another site...

Marcus





5-34 = 12-34: oldest firmware,
goods: none?
bads: no macrovision-off, vbr mp3 chrips, no future upgradable from
CDRs.
unknowns: all regions?

5-37 = 12-37, newer firmware,
goods: all regions, macrovision-off OK, future upgradable from CDRs.
bads: vbr mp3 chrips

5-3C, latest German firmware,
goods: macrovision-off OK, future upgradable from CDRs, vbr mp3 OK,
Yamakawa logo looks alot better than
Raite's
bads: default is PAL video-out, so video is all messed up until you
enter commands to make it NTSC, all regions
except US (can't play US(region 1) DVD's until someone finds a way)
unknown: Is there a US version of this '3C'?

You can get it from a german site, Seiditec. http://www.seditec.com/sei
te8.htm The only problem is that the site is in German but you can
translate it with http://babelfish.altavista.com. I did that in message
7.

Marcus





"lewis whitmire" <jay-@...> wrote:
original article:http://www.egroups.com/group/raite-dvd/?start=11
>  I just bought my Raite 715 from an online dealer (Egghead). the
> Raite website says to see your dealer for the upgraded firmware.
> I'm guessing that Egghead does not have it. Is there somewhere
> else to get it?
>
> -L. Whitmire
>

I just bought my Raite 715 from an online dealer (Egghead). the
Raite website says to see your dealer for the upgraded firmware.
I'm guessing that Egghead does not have it. Is there somewhere
else to get it?

-L. Whitmire

HAS ANYBODY DONE A CDR UPDATE FROM REV. 5-37 TO A HIGHER REV.
I CAN'T GET IT TO WORK

NICE URL
http://bboard.mp3.com/mp3/ubb/Forum73/HTML/000034-18.html

THIS WORKS ON MY RAITE 713K FIRM 5-37
Regio Code: (All verions)

[COPIED FROM A RAITE SITE]
Put a DVD in the player & go to the setup menu. (Press STOP 2x - Press
SETUP)
Press SLOW - Left SKIP - Right SKIP
Now you get something like this *B* in the left upper corner.
A stands for regio 1 - B stands for regio 2 - and so on
Use the arrows to browse through the options until you get three stars
***
The player is now regio free

Macrovision: (Only tested on 5-37 & 5-38)
Put a DVD in the player & go to the setup menu. (Press STOP 2x - Press
SETUP)
Press SLOW - Right SKIP - PAUSE
Now you get an M in the left upper corner
Press PLAY, now its Macrovision free

Some has reported it's only Macrovision free until you power down the
RAITE,
but I've tested with many Macrovision protected DVD's and it even worked
after I've power down. (Firmware version 5-38)

Firmware:
To see what firmware you have simply go to the SETUP
Press SLOW - Left SKIP - 3
The firmware appears on the upper left corner



"bernard" <bs296-@...> wrote:
original article:http://www.egroups.com/group/raite-dvd/?start=8
> Hi,
> I leave in europe and I've purchase a DVD Raite Avphile 715.
> I've trying to disable macrovision but when I type the key sequence,
> nothing happend ( no "M" in the upper corner etc...).
> When the sequence is finished, I'm still on the setup menu.
> My DVD is recent, I think that it's a new firmware and the hidden menu
> is no more active.
> I cannot see the firmaware revision ( no hidden menu to show that )
> Is anybody have the same problem ?
> Is it a solution to make an upgrade/downgrade of the firmware ?
>
> Thanks for your help
>

Hi,
I leave in europe and I've purchase a DVD Raite Avphile 715.
I've trying to disable macrovision but when I type the key sequence,
nothing happend ( no "M" in the upper corner etc...).
When the sequence is finished, I'm still on the setup menu.
My DVD is recent, I think that it's a new firmware and the hidden menu
is no more active.
I cannot see the firmaware revision ( no hidden menu to show that )
Is anybody have the same problem ?
Is it a solution to make an upgrade/downgrade of the firmware ?

Thanks for your help

I found this information on the web. It is from a german site
http://www.seditec.com/seite8.htm. I got the side translated to English
with http://babelfish.altavista.com. I hope you can find it useful. In
a Swedish discussiongroup they are talking alot about firmware and I
will return with more information later. Also the information I got
from there is that all the player are the same but they have different
names. Don't forget to visit http://www.seditec.com/seite8.htm.



Specialized trade AREA Yamakawa:

A.) procedure with available EPROM burner

To this page we set current firmware release for our specialized trade
colleagues as if ARE file for the order.

Please you note that we the handling this files (like loade I this UP,
which program I, which hardware I, use need) neither supports nor
support. A Upload presupposes technical detail knowledge. The use and
the application of the files takes place on own risk and own danger.

BIN_Yamakawa_715   http://www.seditec.com/Download/dvd/715/Bank30.rom

BIN_Yamakawa_713   http://www.seditec.com/Download/dvd/713/Bank30.rom


b.) Proceed with updates by means of creating ISO-CD

1. The update can be more highly executed only starting from the
firmware design 05-36 or. Make sure that your Player over a suitable
version available.

They can determine the firmware design by the pressing of the following
keys:

<POWER> to switching on of the device on

<SETUP> in order to arrive into the configuration menu

<SLOW> <SKIP LINKS> in order to call the firmware design

<POWER> to switching the device off

A possible firmware design is F2Y12GPX-01-0X. The specification behind
the " GPX " - here 01-0X - gives the firmware design on (this version
01-0X would not be updatable).

Update-capable firmware designs: 05-36, 05-37, 05-38, 3b, 3c and more
highly

2. Load the files relevant for your Player (BANK30.ROM, APASSWD (files
see below)) of the Seditec server down. Subsequently, you burn the two
files by means of a commercial D-CBurner on data CD (ISO). a please
note you that thereby no modifications in the file contents or file
names are made and it also the way of writing in Versalien must is
maintained.

2,1 Yamakawa-713

File_1   http://www.seditec.com/Download/dvd/713/Apasswd

File_2   http://www.seditec.com/Download/dvd/713/Bank30.rom

2,2 Yamakawa 715

File_1   http://www.seditec.com/Download/dvd/715/Bank30.rom

File_2   http://www.seditec.com/Download/dvd/715/Apasswd

3. Switch for the Yamakawa DVD Player on and insert you the CD with the
update.

4. After a short load duration the update is executed. Possible color
modifications in the image background are normal and represent no
malfunctioning.
5. After successful update you remove please those for CD and switch
the device off.

6. Their device is now again ready for use

*************** copyright / use note *****************

The files provided here are supplied exclusively for the own use in a
Yamakawa Player or for service bureaus to the direct Aufspielen on a
customer device. A supply on other ftp servers, Webpages, BBS, D-CRome
etc. is expressly in copyright matters forbidden. Directlink on the BIN
files stored here is likewise illegal; to one link on ours seditec.com
homepage hereby expressly one agrees.






"yves" yves_n-@... wrote:
original article:http://www.egroups.com/group/raite-dvd/?start=5
> Can I use a Yamakawa firmware on a raite dvd player??
>

Can I use a Yamakawa firmware on a raite dvd player??

How can I obtain/download the newest firmware for my raite 713k.
Is it on CD, do I have to take out the DVD(rom) player?

btw Tnx for the macrovision patch.....:)

Y-tool is a program that help you to make a nice list of your mp3-files
in a easy way. The only problem is that the program is in German but
it's so easy so it doesn't matter. You find the program under VAULT -
FILES.

You'll have to do it over again everytime you powered-off the machine.


"marcus bjarsholm" <kingarn-@...> wrote:
original article:http://www.egroups.com/group/raite-dvd/?start=1
> Stop the film 2x STOP. Then press "setup", "slow", "skip right" and
> "pause". Now there will be a "M" in the upper left corner and the
> macrovision is disabled.
>
>

Stop the film 2x STOP. Then press "setup", "slow", "skip right" and
"pause". Now there will be a "M" in the upper left corner and the
macrovision is disabled.