ok guys this is probably gonna be a dumb question or two cause i'm only a tech head in other areas but here goes, first off ive checked the posts but can't...
You will want to set up your new hd as a slave to the older WD drive- you already have the 2 CDR drives on the same cable, right? If you can't move the hd's...
Let me start off by saying that I used to really, really enjoy my RSP. As time has progressed, though, I seem to have more problems. First, there was the...
Respectfully, I have to STRENUOUSLY disagree. If you insist on making this configuration work with only the two IDE interfaces on your motherboard, I suggest...
Christopher, Sorry the troubles keep plaguing you in such a cruel way. I do not recommend using the Delta drivers with the RPC-1. Certainly many (including...
Jake: I have much respect for your opinions here but I was told that a slower device on an IDE cable will limit the speed of the faster device so you should...
Hi Jake & Steve, I was actually going to let you guys respond to the original post, since you both know more about the PC end of this thing than I do, but...
... recording,does ... hey guys just to clear this up , i guess i just worded it wrong , i know, its commonsence that im not gonna be burning or even using the...
Dave: That's a good question that has been raised in this thread: will a CDR drive slow down a hard drive on the same IDE cable even when it is not being used?...
... My understanding of IDE indicates that it this is only the case during actual use. SCSI is different - putting a slower device on a SCSI chain will limit...
... DOES NOT ... will ALWAYS ... more memory ... contains ... Infrequently means ... drift. The ... degree ... Good point! I know that some people have...
Honestly I haven't done enough experimentation to form an educated opinion on proper swap file size for music usage purposes. On a "general usage" basis I...
hello gents,new guy here. ive been watching here for some time and have learned alot especialy about the 2 hard drive thing. so i moved my spare drive onto its...
Hi ... There are standard methods in Windows (your are not on Mac, huh?) to control the swap size. The best thing for you to do is to make a Google search for...
okay i just bought a used studio pack off ebay... mistake? perhaps. Here's the problem: When i push up the Channel #1 fader, nothing happens. Same with...
Vik, First thing to do is to a system reset (re-initialize it) for the VM-3100 Pro. I don't remember how, but if you can't find how, I am sure someone in the...
... <snip> The swap file, also referred to as the page or paging file, is a special area of the hard drive specially reserved for virtual memory. Virtual ...
I Would defenetly recomend you to upgrade your mixer to the version 1.055 avaiable in www.Rolandus.com in support area... Altought, when upgrading you are ...
I did the system initilization - it didn't help. I dont think that the previous owner up graded to v1.055. I'm wondering if this problem could be hardware...
The update Ver. 1.055 its basicly Midi files that you can open in (Ex: Cubase Nuendo etc) and then play them back into Vm-3100 via Midi Cable. As soon as...
Hi there, I just bought myself a VM 3100 and have some questions on how to use it with Logic Platinum 4.8.1. I would like to be able to mix songs that I...
There should be a control interface in our files section that will enable all the fancy stuff for Logic. There is a folder labeled "How to VM3100 control LAP."...
Interesting. The same thing happened with mine recently, but just with channels 1 and 8. After a chat with Roland, I sent it back for service. They replaced...
I've been using my Studio Package for a year or two, works perfectly on my OS9 system. Thinking of getting a newer Mac, which would have to run OSX. So, if I...
I called them up, and their first reply was 'oh, static interference' I was pissed because he didnt even tell me to intialize or anything. So i knew HE had no...
... been able to get the tranport or faders to control cubase though, but thats okay idid not use them that much for that anyway. and i can always go back to...
Vik, Nope, you're not the only one. But it doesn't seem to be something that's user serviceable. I thought mine took a hit from a storm, and maybe yours did...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
