OK. The wake on LAN cable will work with minor mod. I seem to be able to get them synced. However, I have no change when I go into Logic. It still only...
Did you click "Multiple Card Sync" in the Hardware Settings tab of the RPC-1 control panel? ... From: joelchappelljr [mailto:joel.chappell@...] Sent:...
As a general FYI: Sync is important for MIDI as well as audio, and here's how: MIDI sync means that all your instruments are operating off the same time base,...
... the RPC-1 ... Yes. I have good clean audio. Midi control for tracks 1-8 from VM3100 #1, and tracks 9-16 from VM3100 #2. The cards are set as RPC1 #1 to ...
Whenever I look through the available channels in the Sounds and Audio Devices control panel, I see both RPC-1 Multichannel and RPC-1 1/2, RPC-1 3/4, RPC-1...
Wow, You are very good at explaining this stuff! Thanks So...In a dual RSP config, you have to connect the "Clock Out" of one RSP to the "Clock In" of the...
Hi Will This group is for the owners of the Roland studio pack which includes *The VM3100 pro *The rpc-1 (PC card) *Emagic logic software The mixer is also...
I'm not familiar with the Option cable. I have not yet used a two-studio-pack configuration (I'm weighing my options for 16 inputs: either a second RSP plus a...
Can anyome help set up my vm3100 pro so i can control Sonar 2 from my vm3100. Does anyone have a Sonar 2 mixer maps for vm 3100 pro. PLease HELP!!!!! email me...
Check out a couple of documents in the Files section of this users group for "Remote Control" of SONAR. I used them with SONAR 2 PRO and they worked. Rich ...
Well it isnt working first of all. I get a slight delay when i press the record toggle combination. Its frustrating and i want it to work. On my old...
I run two VM-3100 Pros with two RPC-1 cards. The manual, believe it or not, is simple and concise with the directions of how to hook them up. It only took me...
That's not entirely true. You can always use the mixer to mix down to two or four channels and use a separate analog or digital audio card to get audio into...
Update on my longstanding popping problem when tracking with digital ... Unfortunately, the above isn't true. Using the busses instead of routing the digital...
Hello can some one help me. I can record MIDI data into RSP but when I play it back NO SOUND AT ALL ? I cant figure out whats going on. I have tried every...
I also faced this problem when I migrated to WIN-XP and got a Roland XV-5050 sound module, as I was using the digital out of the module. I am sure I've read in...
Hi ... when ... I ... I am sorry, to hopefully be able to help I/we need more explanation about your problem. You are sending midi data into the midi in on the...
Hi ... I am not in front of my PC right now but.....If you know how to open the RPC card's window, there is a Help or About menu which gives the current...
Hello, I am using the MIDI interface on the VM3100 Pro to enter midi data into Logic RPC. IT IS RECORDING data. I have a ROLAND mc 307 GROOVE BOX THAT I AM...
Hi Can anybody help me? I use the Monitor Out for headphone monitoring when overdubbing. It has gone silent on me overnight. The manual informs me that...
I think that was a post of mine in which I stated that I thought I had fixed the problem by changing the DIP switches. Turns out that didn't fix the problem. ...
Soren - If you press the channel button above the master out fader.... there should be an Aux left and right which would send the audio to the monitor out. ...
... that ... Oh man, and I was so happy when I read your post... Well, as I told you, I didn't have time to try that anyways. When I first noticed the pop...
I did the same thing (reset) and it worked, however you will lose scene memory settings. ... _________________________________________________________________ ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
