Bit depth and sample rate are completely independent of one another. There is DEFINITELY plenty of good reason to use 24 bits, even if the sample rate does...
Hi all I am hoping someone can help me troubleshoot my issue. Basically I will start with the question.. Has anyone out there had a hardware issue as far as...
Ness, Have you tried running the software without the SI-24 powered on? OK, you won't hear anything, but this way you can check if the software (Logic) is...
yeah i think i did try that and it did the same thing... im actually thinking its the rpc-1 if anything. i will try that again today at rehersal... "Computer...
If you can't get anywhere with anything else, you could try using a cotton swab with high-purity isopropyl alcohol to clean the contacts on the PCI card. Poor...
Hi all, I just "upgraded" to a Studio Package Pro. The one I bought was a floorsample, and I am missing all of the manuals....yes....good luck!. Does anyone...
I had some moderately similar issues with both Logic RPC and Cubase 1.x that turned out to be a video card driver issue. The video card was NVIDIA and the OS...
hmmm well i tried 2 different video cards which were both nvidia cards (mx440 and a ti4200 chipset series) i also tried to manipulate the software with the...
Have you tried it in an Intel-based system or only AMD? Many have reported problems with the VIA PCI implementation... and I still think you should try ...
i have only used it on amd systems. last night the system just shut off completely while we were in the other room. the system would not power up.. i opened...
Enter your vote today! A new poll has been created for the rolandstudiopack group: What platform do you use? Mac, AMD or intel.. I am having stability issues ...
rolandstudiopack@yaho...
Aug 7, 2004 5:50 pm
4355
That's a load of crap! I have recorded 14 channels (with two VM3100 Pros and Cubase 1.051) on an AMD based Motherboard with out any troubles. Also, we...
i agree... i started a poll to see how people are doing w/ the rpsp according to what platform they use. im interested to see how this turns out. "Computer...
While I personally chose an intel system for my music platform, I certainly agree that a solid AMD platform can be built for music ... if you are *VERY*...
You know it also occurs to me that there could be grounding problems between the SI-24 and the USB drive... try with neither plugged in and see what happens. ...
the power supply is solid. (antec 450) system has been setup in multiple homes w/ multiple outlets and power cables. Stability issues occur are alot less...
Okay folks lets not start the old AMD vs. Intel debate again. The facts are as follows (and anyone who has been on this group for a couple of years should...
All of a sudden I don't have any channel strips showing in Track Mixer View in Logic. I just get a gray screen. Even songs that worked great before have lost...
Does anyone have a manual for the SI24 that they would not mind scanning for me? Otherwise, is there a master reset for the unit? I upgraded last week to the...
I believe the problem people are experiencing is with non-intel chipsets, specifically VIA, which are typically in machines equipped with AMD-processors. I am...
I stand by my original statement that I believe an AMD system can be a solid platform with careful choice of components. More thought and input from others...
suddenly i get no output from the rpc-1 card. tr01 and tr02 show no levels on the mixer, but the control panel shows levels. i can still record, and i can...
Hi Brian ... i ... This is an annoying problem for sure. I don't have a solution but I will throw a couple of suggestions your way. 1) The RPC-1 setup...
i forgot i could try the other outputs. they work fine. roland thinks its a driver issue, so i have to deal with midiman, whos been telling me the whole time...
The first major problem I've experience with the studio pack happened last night during a relatively intensive recording session. When recording an acoustic...
Honestly I've never been a fan of the RSP's mic pres to begin with. I would recommend considering a decent quality component mic pre anyway, especially for...
It sounds like you may have lost your time clock lock on the RMDB. While that has never happened to me as you describe, it is a possibility. Also, I have had...
My vm3100 studio pack has been a pain in the butt from the getgo. I've had it working a few times in it's life but it's useless again. I am getting no signal...
You are making sure that after you initialize the mixer you set it for 'RMDB Direct' routing, right? Default settings don't send the inputs to the computer. ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
