... Yes, <http://geocities.com/jmmahony/LX10/forkalign.html>, but read below first. ... The test that you're doing here is primarily a way to test the accuracy...
Hmm, quartz controller? I think I'd count the teeth. Are you sure the motor is ac, or is it just that the power supply for the scope is ac? -John ... ...
Leave the spacers in! The collimation screwholes in the metal plate that the sec is attached to are drilled and threaded all the way through. If you remove ...
Thanks, John Wayne ... From: John Mahony To: sct-user@yahoogroups.com Sent: Saturday, October 01, 2005 3:07 AM Subject: Re: [sct-user] Re: Bob's Knobs + 1981...
John P may have a drive corrector and his scope is 110V. My old (early 80's) orange tube drive base is 110 and I have a Digitrac quartz controlled drive...
its AC, its got the plug-in on the bottom of the base, and a little sticker that says 110V i counted the teeth 3 times last night, 359,,, johnp ... sure the...
Hi Rod, Thanks for your efforts on the plaques and certificates. Was the CloudyNights operation impacted by the hurricanes as well? Never got my T-shirt. ...
http://www.starizona.com/birding/index.cfm?action=10 It's a daytime shot of a bird. If you look carefully the bird has a faint outline around him. Actually,...
Hi Dennis: This is probably one for Kevin to answer...but I doubt that the storms had much effect on CN/Astronomics...though they do seem to have had some...
... storms had ... some effect ... ^^^^^^ Plaques, mail, T-Shirts & Oil ain't the only things that's been affected! Experienced somethin' weird this mornin' at...
From: "starhopper44" <starhopper44@...> Subject: [sct-user] Re: Contest plaques You wanta imagine one pitiful sight, imagine turning the ... Cause to...
Tom Slater
tslater@...
Oct 1, 2005 7:00 pm
80252
Hi Im the lazy type. Calculate the numbers for both situations. Put one set in and see how it tracks. If it is off, put the other set in. I had a set of...
Wayne, I first installed my Bob's Knobs with the nylon spacers. However, the dust cap would no longer fit. My dust cap is a bayonet style. The knobs stuck...
... tobacco! ... ^^^^^^^^^^^^^ Yeah....as the realization sinks in of possible realities brought about by nat'chul disasters, I'd bet at least one member's...
... Hi Phil, Depending on the context of what people are using "K" for, you will get two answers. 4K from a software/hardware point of view is 4096 (2^12)....
... From: scopenutt To: sct-user@yahoogroups.com Sent: Saturday, October 01, 2005 8:35 AM Subject: [sct-user] Re: C8-Plus question its AC, its got the plug-in...
Brent, I forgot to mention that I have a C9.25 SCT. It doesn't have a dust cap so I don't have that issue. I wonder if you could just leave the cap off. It...
Hi I think there are two types of dust caps being discussed here. One is a small cap over just the end of the secondary housing and covers the collimation...
Brent, Disregard my last post...to wit : forgot to mention that I have a C9.25 SCT. It doesn't have a dust cap so I don't have that issue. I wonder if you...
... I went up market and used Auto Zone auto trim adhesive in a spray can. Now I know where that "new car" smell comes from, off gassing adhesive. GC...
Hi OK, but put that thing in the sun for a couple of days before you use it. That "smell" is physically a coating that can collect on surfaces. It will...
You are correct, PT...I confounded the two. I posted my redaction. Thanks Wayne ... From: P T Chambers To: sct-user@yahoogroups.com Sent: Saturday, October...
From: "George Cushing" <pinyachta@...> Subject: [sct-user] Re: Dew shield ... Ever wonder where that hazy coating comes from on the inside of the glass...
Tom Slater
tslater@...
Oct 1, 2005 11:24 pm
80268
... /\/\/\/\/\/\/\ The importance of having it covered escapes me. Even if it's a matter of 'appearance', so what if it isn't covered - when it's in...
From: "starhopper44" <starhopper44@...> Subject: [sct-user] Re: Bob's Knobs + 1981 C8 ... Wondered that meself. My NS11 has Fastar and the little rotary...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
