Hi All. I'm kind of new to the StampPlot 'game' so, please have mercy... I have created a two plot design, for main and secondary data flow but, I can't make...
Hi, I've just started experimenting with StampPlot to see if I can control it and send data to it from Hyperterminal (Hyperterminal -> Com Port 1 - ... drift)....
HI, Nothing jumps out at me right away on what could be causing this. You might de-select DTR and see if that helps. I'll try to repeat this during the...
No, sorry, I realized that weekend I didn't HAVE a null modem cable, then all last week I was gone. Give me a few more days please. -Martin _____ From:...
Thanks Martin, no problems - I appreciate the help. I should add that the null modem cable I am using just has RX/TX and GND lines connected but I think this...
Finally tested this out, sorry it took so long... My setup seemed to work fine, which consisted of: - A direct connection COM port - Virtual Com port using an...
You can measure the voltages between your RS-232 grounds (pin 5 ) when un connected. If more than a volt or two, you may have issues. I've blown out RS-232...
I am new to stamp plot and also at the point that a tcp interface would be great. I was of the understanding the you still connected the serial device to stamp...
Hi Joe, I'm not exactly sure what you are asking for. StampPlot can connect to a device either directly using TCP/IP or using the Serial <> TCP gateway...
Hi Martin and other group members, I am trying to update a StampPlot LABEL and IMAGE with values from a compass. The object LABEL updates fine (0 to 360')...
Hi Stuart, What directory are the images in? What you show should be correct. -Martin _____ From: selmaware@yahoogroups.com [mailto:selmaware@yahoogroups.com]...
Martin, Just tried it and the Direction arrow spins fine (when I turn the compass) ... compass to the ROV GUI so I can see where its heading. Thanks very much...
Glad to hear... Got past my typo i see! You can put images in the same directory as your macro and use (PATH)Arrow... Makes your files more portable to use...
Hi all, I am using App bee board on BASIC to enable wireless communication.I am following the App bee documentation.I am a novice in this area.There was an...
Hi Martin, Here are my configuration details: 1.I am using App bee board on BASIC stamp bread board.It has an xbee chip on it. 2.From the sender side,I have an...
Hi Lokesh, What looks correct actually is the Hlo. By the time the BASIC Stamp receives one character and bring toggles RTS, the 2nd 2nd character is already...
Hi Martin, Thanks for your quick response.For receiving strings,I used only [x] and not [DEC x].I am able to see the data being sent from source xbee connected...
Ok, let's test the board. Have XBee's in their default configuration (MY = 0). Power down the BASIC Stamp board, connect a jumper directly between TX and RX...
Hi Martin, I was not able to see Xbee's communicating even before using the Maxstream's Loop back adapter unless I set the individual Xbee with dedicated...
Um, yes, sorry, after connecting TX to RX you need to power up the board again. For testing, I have all at default settings of DL=0 and MY=0. This allows...
Hi Martin, I tested them as per your direction and I am able see the data flowing between two xbees(i.e) TX and RX glowing when data is sent from the ...
Greetings, StampPlot Pro version 3, Release 8.0 is now posted. This release has cumulative fixes for Windows vista including fixing problems when opening by...
Sorry, forgot to mention the new release also supports the use of a joystick for control for use in ROV, Bot or other applications. Please see the help files...
Martin, AOL have stopped their users website hosting service so the on the link on your "StampPlot samples" page to my ROV site no longer works. If you wish...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
