Roboteers,

MEETING: Southeren Oregon Robotics will have it's
monthly meeting this Saturday (Aug 12th) at Pizza Hut
in Grants Pass.  The address is 1465 Ne 6th St, Grants
Pass.  The meeting starts at 6pm sharp!

Remember that we ALL agreed that we would bring our
bots for a little friendly competition again this
month. We'll do line following and sumo.  BRING YOUR
BOTS!!!

Jon Peterman will be showing the "first steps" from
his new six servo walker.  Jon's make a lot of
progress on this since the last meeting and it's very
cool!

As always... Bring along anything you are working on
for show-n-tell!  You are working on something right?

See you there...  John


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Roboteers,

MEETING: Southeren Oregon Robotics will have it's
monthly meeting this Saturday (Sep 9th) at Pizza Hut
in Grants Pass.  The address is 1465 Ne 6th St, Grants
Pass.  The meeting starts at 6pm sharp!

Remember to bring your bots bots for a little friendly
competition again this month. We'll probably do line
following and sumo.  BRING YOUR BOTS!!!

Hopefully Jon Peterman will dazzle us again with more
progress on his little six servo walker.  I am just
finishing assembly of a new LynxMotion BRAT humanoid
(walker).  I should have it moving under it's own
power for the meeting.  You won't want to miss this if
you've seen the BRAT videos at:
http://www.lynxmotion.com/ViewPage.aspx?ContentCode=videos&CategoryID=17
This thing is very cool.  You better come and check it
out!

As always... Bring along anything you are working on
for show-n-tell!  You are working on something right?

See you there...  John


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Hello everyone!

I'm relatively new to the field of Hobby robotics, but I'm enjoying it
a great deal. I'm working on a prototype for one of my projects and
have been studying as much as I can about hardware, parts, electronics
and programing.

I've desiged a circuit board from my prototype and I think it's not
too shabby, but I want someone's experienced opinion so I know for
sure if it will work safely.

Would anyone be willing to look at it for me and give me any pointers?

Thank you!

Roboteers,

MEETING: Southeren Oregon Robotics will have it's
monthly meeting this Saturday (October 14th) at Pizza
Hut in Grants Pass.  The address is 1465 Ne 6th St,
Grants Pass.  The meeting starts at 6pm sharp!

Remember to bring your bots bots for a little friendly
competition. We'll probably do line following and
sumo.  BRING YOUR BOTS!!!

For those of you who missed it last month, I'll bring
along my new LynxMotion BRAT humanoid walker).  I'm
not bringing the projector for a full blown demo
again, but I'll bring the bot and my laptop with some
videos.  You can also see some BRAT videos at:
http://www.lynxmotion.com/ViewPage.aspx?ContentCode=videos&CategoryID=17
This thing is very cool!

As always... Bring along anything you are working on
for show-n-tell!  You are working on something right?

Hope to see you there...  John


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Roboteers,

MEETING: Southeren Oregon Robotics will have it's
monthly meeting this Saturday (November 11th) at Pizza
Hut in Grants Pass.  The address is 1465 Ne 6th St,
Grants Pass.  The meeting starts at 6pm sharp!

Two sets of Mattracks were given away at the last
meeting.  One set went to Zane Moore who has figured
out a way to install them on his BoeBot.  Zane will be
doing a demo for us at this meeting and telling us how
he managed to overcome a lot of difficult challenges
to get these working.

Turnout has been pretty low lately.  I hope more of
you can come this month.  I know we all have a lot of
irons in the fire, but this is YOUR club and we need
YOUR support to keep it viable and interesting.

This month I'd like to have a discussion about where
the club is headed.  I hope everyone will be there and
share their ideas.  We seem to be loosing some of our
"SPARK" and maybe we need to change our direction to
get back on track.

As always... Bring along anything you are working on
for show-n-tell!  You "are" working on something
right?

BRING YOUR BOTS!!!   ...John


_______________________________




________________________________________________________________________________\
__________
Sponsored Link

Talk more and pay less. Vonage can save you up to $300 a year on your phone
bill.
Sign up now. http://www.vonage.com/startsavingnow/

Roboteers,

MEETING: Southeren Oregon Robotics will have it's
monthly meeting this Saturday (November 11th) at Pizza
Hut in Grants Pass. The address is 1465 Ne 6th St,
Grants Pass. The meeting starts at 6pm sharp!

Two sets of Mattracks were given away at the last
meeting. One set went to Zane Moore who has figured
out a way to install them on his BoeBot. Zane will be
doing a demo for us at this meeting and telling us how
he managed to overcome a lot of difficult challenges
to get these working.

Turnout has been pretty low lately. I hope more of
you can come this month. I know we all have a lot of
irons in the fire, but this is YOUR club and we need
YOUR support to keep it viable and interesting.

This month I'd like to have a discussion about where
the club is headed. I hope everyone will be there and
share their ideas. We seem to be loosing some of our
"SPARK" and maybe we need to change our direction to
get back on track.

As always... Bring along anything you are working on
for show-n-tell! You "are" working on something
right?

BRING YOUR BOTS!!! ...John

_______________________________

__________________________________________________________
Sponsored Link

Talk more and pay less. Vonage can save you up to $300 a year on your phone bill.
Sign up now. http://www.vonage.com/startsavingnow/

Hello Everyone,

I was wondering if anyone familiar with dewalt drill motors,
know if there is a comprabable brushless motor with
the same size, performance and available gearbox..

I'm looking to replace the 18 V Dewalts/gearbox that I have used before.

If you are not familiar with the dewalts this website has some info.

http://www.robotmarketplace.com/marketplace_dewalt.html
http://www.robotmarketplace.com/marketplace_mechanical.html

Thanks,
DK

_________________________________________________________________
Get the latest Windows Live Messenger 8.1 Beta version. Join now.
http://ideas.live.com

I've used the dirt cheap $29 18V's from Harbor Freight.  They're
certainly not as good as the Dewalts, but they do well for pushing a
robot around.


Quoting D K <dktkd@...>:

> Hello Everyone,
>
> I was wondering if anyone familiar with dewalt drill motors,
> know if there is a comprabable brushless motor with
> the same size, performance and available gearbox..
>
> I'm looking to replace the 18 V Dewalts/gearbox that I have used before.
>
> If you are not familiar with the dewalts this website has some info.
>
> http://www.robotmarketplace.com/marketplace_dewalt.html
> http://www.robotmarketplace.com/marketplace_mechanical.html
>
> Thanks,
> DK
>
> _________________________________________________________________
> Get the latest Windows Live Messenger 8.1 Beta version. Join now.
> http://ideas.live.com
>
>
>
> SF robot meetings are at 7PM on the first Wednesday of the month at
> SFSU's Science bldg - 1600 Holloway, room SCI 256.
>
> http://www.robotics-society.org/images/sfsu_map.gif
> Yahoo! Groups Links
>
>
>
>

Thanks for the tip David.
Are there any brushless motors that that are comprabable to
the Dewalt?
I've seen big brushless motors that can do the job,
but nothing that is as small as the dewalts.

DK

----Original Message Follows----
From: David Calkins <dcalkins@...>
Reply-To: sfrsa@yahoogroups.com
To: sfrsa@yahoogroups.com, D K <dktkd@...>
Subject: Re: [rsa] Dewalt Motors
Date: Thu, 30 Nov 2006 17:51:38 -0800

I've used the dirt cheap $29 18V's from Harbor Freight.  They're
certainly not as good as the Dewalts, but they do well for pushing a
robot around.


Quoting D K <dktkd@...>:

  > Hello Everyone,
  >
  > I was wondering if anyone familiar with dewalt drill motors,
  > know if there is a comprabable brushless motor with
  > the same size, performance and available gearbox..
  >
  > I'm looking to replace the 18 V Dewalts/gearbox that I have used before.
  >
  > If you are not familiar with the dewalts this website has some info.
  >
  > http://www.robotmarketplace.com/marketplace_dewalt.html
  > http://www.robotmarketplace.com/marketplace_mechanical.html
  >
  > Thanks,
  > DK
  >
  > _________________________________________________________________
  > Get the latest Windows Live Messenger 8.1 Beta version. Join now.
  > http://ideas.live.com
  >
  >
  >
  > SF robot meetings are at 7PM on the first Wednesday of the month at
  > SFSU's Science bldg - 1600 Holloway, room SCI 256.
  >
  > http://www.robotics-society.org/images/sfsu_map.gif
  > Yahoo! Groups Links
  >
  >
  >
  >

_________________________________________________________________
Get FREE company branded e-mail accounts and business Web site from
Microsoft Office Live
http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/

The harbor freights are almost the exact size of teh dewalts.

Just not the torque

Quoting D K <dktkd@...>:

> Thanks for the tip David.
> Are there any brushless motors that that are comprabable to
> the Dewalt?
> I've seen big brushless motors that can do the job,
> but nothing that is as small as the dewalts.
>
> DK
>
> ----Original Message Follows----
> From: David Calkins <dcalkins@...>
> Reply-To: sfrsa@yahoogroups.com
> To: sfrsa@yahoogroups.com, D K <dktkd@...>
> Subject: Re: [rsa] Dewalt Motors
> Date: Thu, 30 Nov 2006 17:51:38 -0800
>
> I've used the dirt cheap $29 18V's from Harbor Freight.  They're
> certainly not as good as the Dewalts, but they do well for pushing a
> robot around.
>
>
> Quoting D K <dktkd@...>:
>
>  > Hello Everyone,
>  >
>  > I was wondering if anyone familiar with dewalt drill motors,
>  > know if there is a comprabable brushless motor with
>  > the same size, performance and available gearbox..
>  >
>  > I'm looking to replace the 18 V Dewalts/gearbox that I have used before.
>  >
>  > If you are not familiar with the dewalts this website has some info.
>  >
>  > http://www.robotmarketplace.com/marketplace_dewalt.html
>  > http://www.robotmarketplace.com/marketplace_mechanical.html
>  >
>  > Thanks,
>  > DK
>  >
>  > _________________________________________________________________
>  > Get the latest Windows Live Messenger 8.1 Beta version. Join now.
>  > http://ideas.live.com
>  >
>  >
>  >
>  > SF robot meetings are at 7PM on the first Wednesday of the month at
>  > SFSU's Science bldg - 1600 Holloway, room SCI 256.
>  >
>  > http://www.robotics-society.org/images/sfsu_map.gif
>  > Yahoo! Groups Links
>  >
>  >
>  >
>  >
>
> _________________________________________________________________
> Get FREE company branded e-mail accounts and business Web site from
> Microsoft Office Live
> http://clk.atdmt.com/MRT/go/mcrssaub0050001411mrt/direct/01/
>
>

I've used the dirt cheap $29 18V's from Harbor Freight. They're
certainly not as good as the Dewalts, but they do well for pushing a
robot around.

Quoting D K <dktkd@hotmail.com>:

> Hello Everyone,
>
> I was wondering if anyone familiar with dewalt drill motors,
> know if there is a comprabable brushless motor with
> the same size, performance and available gearbox..
>
> I'm looking to replace the 18 V Dewalts/gearbox that I have used before.
>
> If you are not familiar with the dewalts this website has some info.
>
> http://www.robotmarketplace.com/marketplace_dewalt.html
> http://www.robotmarketplace.com/marketplace_mechanical.html
>
> Thanks,
> DK
>
> __________________________________________________________
> Get the latest Windows Live Messenger 8.1 Beta version. Join now.
> http://ideas.live.com
>
>
>
> SF robot meetings are at 7PM on the first Wednesday of the month at
> SFSU's Science bldg - 1600 Holloway, room SCI 256.
>
> http://www.robotics-society.org/images/sfsu_map.gif
> Yahoo! Groups Links
>
>
>
>

Thanks guys.
I like harbor freight as well.

But I'm pretty sure that their drill
motors are brushed.

I'm looking for a "brushless" equivalent to
the brushed Dewalt/Harbor Freight motors.

Cheers.
Dennis

----Original Message Follows----
From: "Andy del Hierro" <andy.delhierro@...>
Reply-To: sfrsa@yahoogroups.com
To: sfrsa@yahoogroups.com
Subject: Re: [rsa] Dewalt Motors
Date: Sat, 2 Dec 2006 08:09:16 -0800

I buy most of all my tools for work from Harbor Freight.  That have a great
warranty and good selection.  Yah there cheap but there cheap ;).

Andy

On 12/2/06, Camp Peavy <cpeavy2@...> wrote:
>
>   FYI: Harbor Freight has a retail outlet in Newark:
>http://www.harborfreight.com/cpi/ctaf/retail_stores.taf?f=detail&Retail_Store_I\
D=38
>
>
>Camp
>
>*David Calkins <dcalkins@...>* wrote:
>
>  I've used the dirt cheap $29 18V's from Harbor Freight. They're
>certainly not as good as the Dewalts, but they do well for pushing a
>robot around.
>
>Quoting D K <dktkd@... <dktkd%40hotmail.com>>:
>
> > Hello Everyone,
> >
> > I was wondering if anyone familiar with dewalt drill motors,
> > know if there is a comprabable brushless motor with
> > the same size, performance and available gearbox..
> >
> > I'm looking to replace the 18 V Dewalts/gearbox that I have used before.
> >
> > If you are not familiar with the dewalts this website has some info.
> >
> > http://www.robotmarketplace.com/marketplace_dewalt.html
> > http://www.robotmarketplace.com/marketplace_mechanical.html
> >
> > Thanks,
> > DK
> >
> > __________________________________________________________
> > Get the latest Windows Live Messenger 8.1 Beta version. Join now.
> > http://ideas.live.com
> >
> >
> >
> > SF robot meetings are at 7PM on the first Wednesday of the month at
> > SFSU's Science bldg - 1600 Holloway, room SCI 256.
> >
> > http://www.robotics-society.org/images/sfsu_map.gif
> > Yahoo! Groups Links
> >
> >
> >
> >
>
>
>
>



--
Andy del Hierro
Gamekiller
To mod or not to mod?

To be one ask one?
                /}
@#####{G]::::::::::::::::::::::::::::::::::::::::::::::::>
                \}

_________________________________________________________________
MSN Shopping has everything on your holiday list. Get expert picks by style,
age, and price. Try it!
http://shopping.msn.com/content/shp/?ctId=8000,ptnrid=176,ptnrdata=200601&tcode=\
wlmtagline

----- Original Message -----

From: D K

To: sfrsa@yahoogroups.com

Sent: Monday, December 04, 2006 12:17 PM

Subject: [rsa] Brushless alternative to Brushed Dewalt/HF Motors

Thanks guys.
I like harbor freight as well.

But I'm pretty sure that their drill
motors are brushed.

I'm looking for a "brushless" equivalent to
the brushed Dewalt/Harbor Freight motors.

Cheers.
Dennis

----Original Message Follows----
From: "Andy del Hierro" <andy.delhierro@gmail.com>
Reply-To: sfrsa@yahoogroups.com
To: sfrsa@yahoogroups.com
Subject: Re: [rsa] Dewalt Motors
Date: Sat, 2 Dec 2006 08:09:16 -0800

I buy most of all my tools for work from Harbor Freight. That have a great
warranty and good selection. Yah there cheap but there cheap ;).

Andy

On 12/2/06, Camp Peavy <cpeavy2@yahoo.com> wrote:
>
> FYI: Harbor Freight has a retail outlet in Newark:
>http://www.harborfreight.com/cpi/ctaf/retail_stores.taf?f=detail&Retail_Store_ID=38
>
>
>Camp
>
>*David Calkins <dcalkins@robotics-society.org>* wrote:
>
> I've used the dirt cheap $29 18V's from Harbor Freight. They're
>certainly not as good as the Dewalts, but they do well for pushing a
>robot around.
>
>Quoting D K <dktkd@hotmail.com <dktkd%40hotmail.com>>:
>
> > Hello Everyone,
> >
> > I was wondering if anyone familiar with dewalt drill motors,
> > know if there is a comprabable brushless motor with
> > the same size, performance and available gearbox..
> >
> > I'm looking to replace the 18 V Dewalts/gearbox that I have used before.
> >
> > If you are not familiar with the dewalts this website has some info.
> >
> > http://www.robotmarketplace.com/marketplace_dewalt.html
> > http://www.robotmarketplace.com/marketplace_mechanical.html
> >
> > Thanks,
> > DK
> >
> > __________________________________________________________
> > Get the latest Windows Live Messenger 8.1 Beta version. Join now.
> > http://ideas.live.com
> >
> >
> >
> > SF robot meetings are at 7PM on the first Wednesday of the month at
> > SFSU's Science bldg - 1600 Holloway, room SCI 256.
> >
> > http://www.robotics-society.org/images/sfsu_map.gif
> > Yahoo! Groups Links
> >
> >
> >
> >
>
>
>
>

--
Andy del Hierro
Gamekiller
To mod or not to mod?

To be one ask one?
/}
@#####{G]::::::::::::::::::::::::::::::::::::::::::::::::>
\}

__________________________________________________________
MSN Shopping has everything on your holiday list. Get expert picks by style,
age, and price. Try it!
http://shopping.msn.com/content/shp/?ctId=8000,ptnrid=176,ptnrdata=200601&tcode=wlmtagline

Hey Pete,

I currently have dewalts and I want to swap them out.
The advantages that the brushless has over brushed
are just what I want

Most brushless that I have seen,
are twice the size and weight of the dewalt
just to get the same performance.

I was curious to see if there is a brushless equivalent that
matched the dewalts.

Thanks,
Dennis


----Original Message Follows----
From: "Pete Miles" <robots@...>
Reply-To: sfrsa@yahoogroups.com
To: <sfrsa@yahoogroups.com>
Subject: Re: [rsa] Brushless alternative to Brushed Dewalt/HF Motors
Date: Mon, 4 Dec 2006 17:28:25 -0800

I am curious, why is it so important to have a brushless motor?

The only ones that I am aware of that has some serious power (for the
hobbiest) are the Astro 040 Brushless Motor www.astroflight.com

Pete


    ----- Original Message -----
    From: D K
    To: sfrsa@yahoogroups.com
    Sent: Monday, December 04, 2006 12:17 PM
    Subject: [rsa] Brushless alternative to Brushed Dewalt/HF Motors


    Thanks guys.
    I like harbor freight as well.

    But I'm pretty sure that their drill
    motors are brushed.

    I'm looking for a "brushless" equivalent to
    the brushed Dewalt/Harbor Freight motors.

    Cheers.
    Dennis

    ----Original Message Follows----
    From: "Andy del Hierro" <andy.delhierro@...>
    Reply-To: sfrsa@yahoogroups.com
    To: sfrsa@yahoogroups.com
    Subject: Re: [rsa] Dewalt Motors
    Date: Sat, 2 Dec 2006 08:09:16 -0800

    I buy most of all my tools for work from Harbor Freight. That have a
great
    warranty and good selection. Yah there cheap but there cheap ;).

    Andy

    On 12/2/06, Camp Peavy <cpeavy2@...> wrote:
    >
    > FYI: Harbor Freight has a retail outlet in Newark:

 
>http://www.harborfreight.com/cpi/ctaf/retail_stores.taf?f=detail&Retail_Store_I\
D=38
    >
    >
    >Camp
    >
    >*David Calkins <dcalkins@...>* wrote:
    >
    > I've used the dirt cheap $29 18V's from Harbor Freight. They're
    >certainly not as good as the Dewalts, but they do well for pushing a
    >robot around.
    >
    >Quoting D K <dktkd@... <dktkd%40hotmail.com>>:
    >
    > > Hello Everyone,
    > >
    > > I was wondering if anyone familiar with dewalt drill motors,
    > > know if there is a comprabable brushless motor with
    > > the same size, performance and available gearbox..
    > >
    > > I'm looking to replace the 18 V Dewalts/gearbox that I have used
before.
    > >
    > > If you are not familiar with the dewalts this website has some info.
    > >
    > > http://www.robotmarketplace.com/marketplace_dewalt.html
    > > http://www.robotmarketplace.com/marketplace_mechanical.html
    > >
    > > Thanks,
    > > DK
    > >
    > > __________________________________________________________
    > > Get the latest Windows Live Messenger 8.1 Beta version. Join now.
    > > http://ideas.live.com
    > >
    > >
    > >
    > > SF robot meetings are at 7PM on the first Wednesday of the month at
    > > SFSU's Science bldg - 1600 Holloway, room SCI 256.
    > >
    > > http://www.robotics-society.org/images/sfsu_map.gif
    > > Yahoo! Groups Links
    > >
    > >
    > >
    > >
    >
    >
    >
    >

    --
    Andy del Hierro
    Gamekiller
    To mod or not to mod?

    To be one ask one?
    /}
    @#####{G]::::::::::::::::::::::::::::::::::::::::::::::::>
    \}

    __________________________________________________________
    MSN Shopping has everything on your holiday list. Get expert picks by
style,
    age, and price. Try it!

http://shopping.msn.com/content/shp/?ctId=8000,ptnrid=176,ptnrdata=200601&tcode=\
wlmtagline

_________________________________________________________________
Get free, personalized commercial-free online radio with MSN Radio powered
by Pandora http://radio.msn.com/?icid=T002MSN03A07001

----- Original Message -----

From: D K

To: sfrsa@yahoogroups.com

Sent: Monday, December 04, 2006 9:18 PM

Subject: Re: [rsa] Brushless alternative to Brushed Dewalt/HF Motors

Hey Pete,

I currently have dewalts and I want to swap them out.
The advantages that the brushless has over brushed
are just what I want

Most brushless that I have seen,
are twice the size and weight of the dewalt
just to get the same performance.

I was curious to see if there is a brushless equivalent that
matched the dewalts.

Thanks,
Dennis

----Original Message Follows----
From: "Pete Miles" <robots@walkingrobots.com>
Reply-To: sfrsa@yahoogroups.com
To: <sfrsa@yahoogroups.com>
Subject: Re: [rsa] Brushless alternative to Brushed Dewalt/HF Motors
Date: Mon, 4 Dec 2006 17:28:25 -0800

I am curious, why is it so important to have a brushless motor?

The only ones that I am aware of that has some serious power (for the
hobbiest) are the Astro 040 Brushless Motor www.astroflight.com

Pete

----- Original Message -----
From: D K
To: sfrsa@yahoogroups.com
Sent: Monday, December 04, 2006 12:17 PM
Subject: [rsa] Brushless alternative to Brushed Dewalt/HF Motors

Thanks guys.
I like harbor freight as well.

But I'm pretty sure that their drill
motors are brushed.

I'm looking for a "brushless" equivalent to
the brushed Dewalt/Harbor Freight motors.

Cheers.
Dennis

----Original Message Follows----
From: "Andy del Hierro" <andy.delhierro@gmail.com>
Reply-To: sfrsa@yahoogroups.com
To: sfrsa@yahoogroups.com
Subject: Re: [rsa] Dewalt Motors
Date: Sat, 2 Dec 2006 08:09:16 -0800

I buy most of all my tools for work from Harbor Freight. That have a
great
warranty and good selection. Yah there cheap but there cheap ;).

Andy

On 12/2/06, Camp Peavy <cpeavy2@yahoo.com> wrote:
>
> FYI: Harbor Freight has a retail outlet in Newark:

>http://www.harborfreight.com/cpi/ctaf/retail_stores.taf?f=detail&Retail_Store_ID=38
>
>
>Camp
>
>*David Calkins <dcalkins@robotics-society.org>* wrote:
>
> I've used the dirt cheap $29 18V's from Harbor Freight. They're
>certainly not as good as the Dewalts, but they do well for pushing a
>robot around.
>
>Quoting D K <dktkd@hotmail.com <dktkd%40hotmail.com>>:
>
> > Hello Everyone,
> >
> > I was wondering if anyone familiar with dewalt drill motors,
> > know if there is a comprabable brushless motor with
> > the same size, performance and available gearbox..
> >
> > I'm looking to replace the 18 V Dewalts/gearbox that I have used
before.
> >
> > If you are not familiar with the dewalts this website has some info.
> >
> > http://www.robotmarketplace.com/marketplace_dewalt.html
> > http://www.robotmarketplace.com/marketplace_mechanical.html
> >
> > Thanks,
> > DK
> >
> > __________________________________________________________
> > Get the latest Windows Live Messenger 8.1 Beta version. Join now.
> > http://ideas.live.com
> >
> >
> >
> > SF robot meetings are at 7PM on the first Wednesday of the month at
> > SFSU's Science bldg - 1600 Holloway, room SCI 256.
> >
> > http://www.robotics-society.org/images/sfsu_map.gif
> > Yahoo! Groups Links
> >
> >
> >
> >
>
>
>
>

--
Andy del Hierro
Gamekiller
To mod or not to mod?

To be one ask one?
/}
@#####{G]::::::::::::::::::::::::::::::::::::::::::::::::>
\}

__________________________________________________________
MSN Shopping has everything on your holiday list. Get expert picks by
style,
age, and price. Try it!

http://shopping.msn.com/content/shp/?ctId=8000,ptnrid=176,ptnrdata=200601&tcode=wlmtagline

__________________________________________________________
Get free, personalized commercial-free online radio with MSN Radio powered
by Pandora http://radio.msn.com/?icid=T002MSN03A07001

---

No virus found in this incoming message.
Checked by AVG Free Edition.
Version: 7.5.430 / Virus Database: 268.15.7/569 - Release Date: 12/5/2006 3:00 AM

Roboteers,

MEETING: Southeren Oregon Robotics will have it's
monthly meeting this Saturday (December 9h) at Pizza
Hut in Grants Pass.  The address is 1465 Ne 6th St,
Grants Pass.  The meeting starts at 6pm sharp!

In the holiday spirit, we'll be having a gift exchange
this month.  If you can, please bag or box something
with robotics potential and bring it along with you to
exchange.  This need not be something new or valuable.
  It can be any old treasure that you have laying
around that you think could be used on a robot.  Just
needs to be something a Robo-Geek would find useful or
interesting!  The exchange has always been a blast and
some of the craziest things have shown up.  Come join
the fun!  You can get something this year to give away
next year! :)

As always... Drag along anything you are working on
for show-n-tell.  You "are" working on something
right?

BringYourBots!!!   ...John




________________________________________________________________________________\
____
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail beta.
http://new.mail.yahoo.com

Sry guys can't come to this meeting. Can you guys head me up on the next meeting
ASAP? That would be great! Calkins, can i talk to you? I need a heads up on the
major coming up events!!! When is the championships? Can you call me on my cell
at 925-360-3139? That would be cool. Sry that i have to miss the Pizza Hut
meeting, have fun! I need the CEO to call me on that note. Can i get George to
call me or text me? Can i get the new S2-820 in on the next  meeting?????? I'm
unvailing the new R3-S38031-BETA or maybe i can get out the new SWAKO-SK2243 i
can get the new one on today or tomarow. New S235.

THNX
Robomatt1
  -------------- Original message ----------------------
From: "S.O. Robotics" <sorobotics@...>
> Roboteers,
>
> MEETING: Southeren Oregon Robotics will have it's
> monthly meeting this Saturday (December 9h) at Pizza
> Hut in Grants Pass.  The address is 1465 Ne 6th St,
> Grants Pass.  The meeting starts at 6pm sharp!
>
> In the holiday spirit, we'll be having a gift exchange
> this month.  If you can, please bag or box something
> with robotics potential and bring it along with you to
> exchange.  This need not be something new or valuable.
>  It can be any old treasure that you have laying
> around that you think could be used on a robot.  Just
> needs to be something a Robo-Geek would find useful or
> interesting!  The exchange has always been a blast and
> some of the craziest things have shown up.  Come join
> the fun!  You can get something this year to give away
> next year! :)
>
> As always... Drag along anything you are working on
> for show-n-tell.  You "are" working on something
> right?
>
> BringYourBots!!!   ...John
>
>
>
>
>
________________________________________________________________________________
> ____
> Do you Yahoo!?
> Everyone is raving about the all-new Yahoo! Mail beta.
> http://new.mail.yahoo.com

Sry guys can't come to this meeting. Can you guys head me up on the next meeting ASAP? That would be great! Calkins, can i talk to you? I need a heads up on the major coming up events!!! When is the championships? Can you call me on my cell at 925-360-3139? That would be cool. Sry that i have to miss the Pizza Hut meeting, have fun! I need the CEO to call me on that note. Can i get George to call me or text me? Can i get the new S2-820 in on the next meeting?????? I'm unvailing the new R3-S38031-BETA or maybe i can get out the new SWAKO-SK2243 i can get the new one on today or tomarow. New S235.

THNX
Robomatt1
-------------- Original message ----------------------
From: "S.O. Robotics" <sorobotics@yahoo.com>
> Roboteers,
>
> MEETING: Southeren Oregon Robotics will have it's
> monthly meeting this Saturday (December 9h) at Pizza
> Hut in Grants Pass. The address is 1465 Ne 6th St,
> Grants Pass. The meeting starts at 6pm sharp!
>
> In the holiday spirit, we'll be having a gift exchange
> this month. If you can, please bag or box something
> with robotics potential and bring it along with you to
> exchange. This need not be something new or valuable.
> It can be any old treasure that you have laying
> around that you think could be used on a robot. Just
> needs to be something a Robo-Geek would find useful or
> interesting! The exchange has always been a blast and
> some of the craziest things have shown up. Come join
> the fun! You can get something this year to give away
> next year! :)
>
> As always... Drag along anything you are working on
> for show-n-tell. You "are" working on something
> right?
>
> BringYourBots!!! ...John
>
>
>
>
> __________________________________________________________
> ____
> Do you Yahoo!?
> Everyone is raving about the all-new Yahoo! Mail beta.
> http://new.mail.yahoo.com

From: "S.O. Robotics" <sorobotics@...>
To: Roboteers <roboteers@...>
Subject: [rsa] Robot Club Meeting in Grants Pass This Saturday!
Date: Wed, 6 Dec 2006 20:43:16 +0000

Roboteers,

MEETING: Southeren Oregon Robotics will have it's
monthly meeting this Saturday (December 9h) at Pizza
Hut in Grants Pass. The address is 1465 Ne 6th St,
Grants Pass. The meeting starts at 6pm sharp!

In the holiday spirit, we'll be having a gift exchange
this month. If you can, please bag or box something
with robotics potential and bring it along with you to
exchange. This need not be something new or valuable.
It can be any old treasure that you have laying
around that you think could be used on a robot. Just
needs to be something a Robo-Geek would find useful or
interesting! The exchange has always been a blast and
some of the craziest things have shown up. Come join
the fun! You can get something this year to give away
next year! :)

As always... Drag along anything you are working on
for show-n-tell. You "are" working on something
right?

BringYourBots!!! ...John

__________________________________________________________
Do you Yahoo!?
Everyone is raving about the all-new Yahoo! Mail beta.
http://new.mail.yahoo.com

I have two robonovas, new in box, fully assembled.

They list for $1200 assembled and $1000 in kit.  I'm willing to let
them go for $950 assembled ($250 off.)  First come, first served.

Great christmas gift - even if it's to yourself!

http://www.youtube.com/watch?v=Om_s_oBc2sk
http://www.hitecrobotics.com/robonova/overview.htm


-David E. Calkins
Director, SFSU Engineering Design Center & Robotics
President, Robotics Society of America / ROBOlympics
http://www.robolympics.net
-----------------------------------------------
Silicon shall replace Carbon.
The revolution will be automated.

Roboteers,

MEETING: Southeren Oregon Robotics will have it's
monthly meeting this Saturday (January 13th) at Pizza
Hut in Grants Pass.  The address is 1465 Ne 6th St,
Grants Pass.  The meeting starts at 6pm sharp!

Last meeting there was a lot of interest and
discussion about line followers.  Hopefully we will
see a bunch of new line following bots at this
meeting!

As always... Bring along anything you are working on
for show-n-tell.  You "are" working on something
right?

BringYourBots!!!   ...John




________________________________________________________________________________\
____
Be a PS3 game guru.
Get your game face on with the latest PS3 news and previews at Yahoo! Games.
http://videogames.yahoo.com/platform?platform=120121

Roboteers,
Due to severe ice and cold weather conditions, the
robot club meeting in Grants Pass tomorrow has been
CANCELLED.  Jon is going to check with Pizza Hut to
see if the meeting room is available NEXT SATURDAY.
If it is, I will send out another meeting notice for
that in the next few days.  If the room is not
available, we will skip this months meeting and get
together again in February at the regular time.

Next Saturday is likely so those of you that "didn't
quite" get your robots ready to show off at this
meeting have another week.  GET BUSY!  :<)

       ...John




________________________________________________________________________________\
____
Have a burning question?
Go to www.Answers.yahoo.com and get answers from real people who know.

Roboteers,

MEETING: The Southeren Oregon Robotics club meeting
that was cancelled for tonight due to severe ice and
cold, has been rescheduled for next Saturday evening
(Januray 20th) at Pizza Hut in Grants Pass.  The
ddress is 1465 Ne 6th St, Grants Pass.  The meeting
starts at 6pm sharp!

Last meeting there was a lot of interest and
discussion about line followers.  Hopefully we will
see a bunch of new line following bots at this
meeting!

As always... Bring along anything you are working on
for show-n-tell.  You "are" working on something
right?

Thanks for Jon Peterman for working this change out
with Pizza Hut for us.  We look forward to seeing
everyone there.

BringYourBots!!!   ...John







________________________________________________________________________________\
____
Finding fabulous fares is fun.
Let Yahoo! FareChase search your favorite travel sites to find flight and hotel
bargains.
http://farechase.yahoo.com/promo-generic-14795097

Western Allied Robotics is hosting the 5th Annual Seattle Bot Battles at the Seattle Center March 10th, 2007.

Bring your 3lb (Beetleweight) 12lb (Hobbyweight) full combat robots to join in the carnage. This year we're also introducing a NEW 12lb Sportsman class.

Visit the WAR website for more information about the organization, details of the event and rules of combat.

Register your robot for the event at the Builders Database and join us for bot talk at the WAR Delphi Forum.

Hi Guys,

I'd like to invite you to a robotic maze solving comp.
I've attached a Word doc that is the maze comps entry
info packet. I've also pasted the event flyer below.

Thanks for your time.






2007 Robotic Maze Solving Comp


April 28 2007 at 11am

To be held at the Winfield VFW Post #5517 on Hwy EE in
Winfield MO.


This event is being hosted by
The St Louis Area Robotic Society in cooperation with
the Winfield VFW Post #5517.

Entry to compete or to simply be a spectator is
FREE!!!

The VFW will be running a concession stand for food
and drinks, with all proceeds going to the VFW.


For more information on this event and the St Louis
Area Robotic Society checkout www.robomo.com


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around
http://mail.yahoo.com

Roboteers,

MEETING: This months meeting of the Southeren Oregon
Robotics club, which was cancelled due to ice and snow
last week, will be held tomorrow night (Januray 20th)
at Pizza Hut in Grants Pass.  The ddress is 1465 Ne
6th St, Grants Pass.  The meeting starts at 6pm sharp!

Last meeting there was a lot of interest and
discussion about line followers.  Hopefully we will
see a bunch of new line following bots at this
meeting!

As always... Bring along anything you are working on
for show-n-tell.  You "are" working on something
right?

Thanks for Jon Peterman for working this change out
with Pizza Hut for us.  We look forward to seeing
everyone there.

BringYourBots!!!   ...John





________________________________________________________________________________\
____
No need to miss a message. Get email on-the-go
with Yahoo! Mail for Mobile. Get started.
http://mobile.yahoo.com/mail

Roboteers,

MEETING: This months meeting of the Southeren Oregon
Robotics club, which was cancelled due to ice and snow
last week, will be held tomorrow night (Januray 20th)
at Pizza Hut in Grants Pass.  The ddress is 1465 Ne
6th St, Grants Pass.  The meeting starts at 6pm sharp!

Last meeting there was a lot of interest and
discussion about line followers.  Hopefully we will
see a bunch of new line following bots at this
meeting!

As always... Bring along anything you are working on
for show-n-tell.  You "are" working on something
right?

Thanks for Jon Peterman for working this change out
with Pizza Hut for us.  We look forward to seeing
everyone there.

BringYourBots!!!   ...John




________________________________________________________________________________\
____
Get your own web address.
Have a HUGE year through Yahoo! Small Business.
http://smallbusiness.yahoo.com/domains/?p=BESTDEAL