... Browser. ... then ... stuck ... Drop my request - I found my problem after some reading - it was a problem with the location of my Sitelinker and...
... delle ... Anche io nella mia applicazione sto facendo la stessa cosa. Solo lo scheletro viene inviato al client dal SP. , per le immagini ho pubblicato...
I have a problem where the SP stops sending out both schelduled and polled UDP. When this happens the Web services are still active and the objects are being...
... Non ho un IP statico. Uso il servizio di DNS dinamico offerto gratuitamente da www.dyndns.org Il mio router/modem ADSL (un Netgear 824)puo' essere...
Hello, I've just gotten my first SitePlayer Developer Board and I have plugged it into my small test network, and found its IP address by guessing. I can surf...
I've got a spare S.P. module that I had in storage for about a year. Took it out to use and it wouldn't communicate on the network side when I'd try to connect...
Mike Peace be upon you .... The IP address needs to be in the SPB to stick, if you do it serially it will revert to previous on a power cycle. Regards Andy...
... serially ... Thanks for the tip Andy. I looked in the archives here and found someone else had similar problems about this time last year. One of you...
I am new to the group, but you may also need to turn off the DHCP function on the SP. I do that all the time although if you are moving it to a new network...
Hi Everybody, I would like to develop a voting station with 16 keys and a lcd or leds display. Multiple stations in the network. Does anybody have any ...
Hello Group, I have an older siteplayer module that I've lifted the PSEN pin of microcontroller to get rid of the voltage offset of approx. 1 volt during the...
Hi Kevin, The PSEN line is used to force the device into reprogram mode so it can be re-flashed. This is used to initially program the SitePlayer at the ...
Chris, Thank you for the advice. I was going through the machine piece by piece and noticed that I could not reassign the internal modem to COM1 either. It...
Hello, I'm new to the SP and I have gotten the SP to connect to my PC via the serial connection, and while on my home network the SP gets a DHCP address with...
There are a lot of thing that could cause this. The simpleless would be to make sure the network wall jack is active. If you have access to the DHCP server I...
If i want to change the baudrate of the serial port(pin 7 & 8) from 9600 to 19200, would this be done in the UDPsend_def.inc or PCADEF.INC file??? also woul...
I am able to communicate with the site player via TCP/IP in a seperate VB6 program. However, the FindSitePlayer project us unable to locate the same...
Update on my previous post. Still using the FindSitePlayer project.. I am able to send information to the server via UDP. However I am not getting a...
It seems like the DHCP server is ignoring my SP. I tried several jacks and cables, and finally pulled the cable out of a computer with a known IP address, and...
All - I'm new to site player, and I've searched the archives but I haven't seen anything about this problem. Please forgive me if it's come up in the past and...
It could be, but I ran 3 different Siteplayers sans the resistors for over a year w/o trouble. Recently, I was looking over the demo board schematic and...
Mike - Thanks for your help. I hadn't thought of the regulator. I will take a look at that. Also, what's the address of your website? Thanks again Chris ... ...
Is there any locations in the philips uC that hold the ip and mac addresses of an incoming UDP packet?(the ip, mac, and port of WHO sent the packet to the...
... take ... The SitePlayer project is on this page. http://www.ringolake.com/pic_proj/servo/sp_servo/servo_SP0.htm The PIC projects are on this page ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
