Did you check the speed compatibility of the router? the siteplayer is a 10Mb device, so maybe, if you have a Gigabyte router it may have problems with speeds...
Thanks for your suggestion. The Motorola WR-850GP is a standard 10/100 router, not Gigabit. I think if there was a basic problem like incompatible physical...
Dear[est] group I'd love to know more about this router problem since now I have a bunch of customers to support. We are seeing odd things like the Siteplayer...
I can tell you what I've tried so far on the Motorola router. a) tried version 4,5,6 firmware from Motorola b) tried disconnecting completely from internet,...
I am not sure if this will help, but try looking for some sort of MTU setting on the router and changing it to a lower / higher number (highest would be 1500,...
The router has MTU settings for the WAN port, however the problem shows up even when just trying to connect to the siteplayer on the local LAN. Here's the...
Andy, Thanks to your suggestion about ETHERREAL, I found and downloaded the software and captured the trace and uploaded it to MOTO850.CAP in the files...
Andy and Netmedia support: I now have captured and uploaded 3 short Etherreal traces that should shed some light onto what is going on: 1) Moto850GP.CAP : This...
Dear[est] Group This is indeed a scary set of traces, most unpleasant! If you look at the Microsoft router trace you'll see that all the packets are standard...
Andy, Thanks for your analysis. In response to your big question: To me it looks like the real packet 68 was dropped somehow, leading to a delay, eventually at...
Dear[est] Group My esteemed colleague and all round ninja has re-created the problem and found a workaround. He has posted to this group, but it hasn't come...
In association with Andy I have been doing some tests using a LinkSys WRT54G wireless access point. My findings are that if the siteplayer is connected...
Andy and lklyneuk, I think you are definitely on the right trail. I have a siteplayer at a remote location which is connected to a Motorola router through an ...
Is it coincidence that some of the incompatible routers (Motorola 850GP, LinkSys WRT54G) have the ADM6996L switch, and some of the known good routers...
Dear Group, Andy reported trouble with a LinkSys WRT-54G, Netmedia reported they couldn't reproduce the problem on a WRT-54G version 4. Looking in the hardware...
Hello Everyone, A big thanks to all on this forum, I have spent hours and days going over them and searching though them to get my siteplayer up and running. ...
Hi guys, I want to mirror the status of some bits at one location to another over ethernet. I could have a PC polling two SPs and setting the outputs when they...
... Greetings and Salutations! ... Don't have a spare SP with me here at work so.... try this (w/o guarantees) Add this line just above the <input type="text"...
... Gudday mate right back at your greetings and salutations.... ... [input] ... Yep. Understand what you are saying, and when tested it worked a treat, it...
Hi All, I have an SP project going that involves water pressure sensing. An 18V wall-wart supplies a 7812 regulator with (I think) the appropriate filter...
You didn't say what your caps are, or how they are located, but i would suggest trying a 1uf tantalum at the input side of the 7812 and a 10uf tantalum at the...
Noway We found that the SP is quite a noisy device. I would suggest a 10nF cap right up against the supply to the SP (which should be 5V!). Also we found...
Thank you both for your replies. Yahhuey, I'll try those new cap values on the 7812. Andy, the project I'm working on involves a remote water pressure sensor...
I actually found this product that will do exactly what I need: http://www.audon.co.uk/neti-link.html I think I saw it elsewhere for much less money though....
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
