I moved the base of the stock finder nearer to the focuser and put a
9x50 upright finder on it. I then put my telrad on the far side of that.
It did require drilling a couple holes, and the backing plate for the
base had to be removed.
Could someone direct me to a Telrad finder site, where it describes it and has a picture of some sort I have searched for it on the net w/ no luck. I have a...
Chris, perhaps you meant http://www.crazyedoptical.com (crazyedoptics.com cannot be found) There is a decent photo of a Telrad there, but no detailed...
A Telrad review http://www.astromag.co.uk/telrad.html A site with Telrad charts http://www.atmob.org/Articles/skymaps_jsmall.html General Telrad info ...
Hi Everyone just purchased a telrad finder for my XT10i. Where would be the best place for it on the scope? Right along side the stock finder? Thanks Anthony...
... That's where I put mine. Since you have the 'i' version, you'll probably only be using the Telrad to locate the alignment stars and the occasional...
I also recently purchased a Telrad for my XT10i. I mount it on the right side of the scope just next to the finder. I would recommend a Telrad riser( 4...
I moved the base of the stock finder nearer to the focuser and put a 9x50 upright finder on it. I then put my telrad on the far side of that. It did require...
Hi John Thanks for the info. Right now I,am in the process of checking the colllimation everything looks fine with the collimation cap but when i put in...
... I had the same experience. I used the video from Andy's Shotglass site and did very careful alignment. Eventually the 2 matched and I've been able to...
... If your focuser is really good, it shouldn't matter. Probably best to rack it in, but I'm not sure it matters- any other opinions here? I just leave the...
... My XT10 is an older, GSO-made model, with a reasonably good R&P focuser. But I find that when the focus tube runs up agains either end of travel, hitting...
No trouble, but to be fair, I sight through my right eye. Sitting on the stool, Its just a matter of turning my head to the left. Like with everything near the...
Thanks Joe for the picture. Are you comfortable with it in that position? They sell a 3'' and 4'' riser I was thinking of getting one. What do you think? ...
... As you can see in the picture mine does not have a riser... and is mounted between the focuser and the right angle finder. Seems to work just fine for me. ...
Bruce thanks in the photo it shows your telrad on the stock finder side I think that is more comfortable then trying to move the stock finder over to...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
Offline 
Send Email
