Jim: Did not mean to "assume" - we know what happens! :) All I am saying is, we've seen for years that very few turbines stand the test of time in a decent...
Doug, dont assume anything. Assume makes an ass out of u and me. You assume the anemometer didnt work right out of the box. Wrong. The anemometer didnt work...
... Don't know. What I know is the output, input and power capability. I don't have construction details. ... The CO2K controller/computer does that and...
Doug, this turbine does not rely on the positioner to avoid smoking (letting the magic smoke out) the electronics. The computer, instead, detects a high...
Jim: I'll be very interested to hear how long this machine lasts. Typical failure mode is inability to respond to gusts fast enough with that auto-yaw furling...
Jim: A slight imbalance may be identified by the use of a sharpie marker held near the driveshaft during operation (if you can get up there) to mark the heavy...
If anyone is wondering why I have not been trying to sell large numbers of my turbines yet, this illustrates exactly why: millions of dollars thrown at a...
29375
Nando
nando37@...
Apr 25, 2012 3:59 pm
Jim: Can you detail : Magnetic Saturation alternator ? what are the technical specifications of this alternator ?. If you are producing 340 V ac how are you...
Foshan Ouyad, 2KW-E Tailless 3.3 meter rotor 80 feet above Corpus Christi Bay, Texas rated 2KW at 9m/s Start up 2m/s Shut off 35m/s (currently set to 20m/s...
29373
Nando
nando37@...
Apr 25, 2012 5:21 am
Jim: though you have indicated in the past how the wind mill is, I would suggest to include to this message all the parameters and specifications you may have...
I finally cut 'er loose and she is producing power. I was a bit worried about the auto-seek feature in place of a tail, but it is extremely smooth and unless...
29371
Nando
nando37@...
Apr 24, 2012 5:44 pm
ANDY KRUSE: I have been reading your site regarding the SKYSTREAM leveling kit and in reality I do not follow how the process is . ...
Hello, Does anyone have suggestions of a permanent magnet generator to replace a 125 hp Lincoln induction generator? Thanks,Corie [Non-text portions of this...
If you go to one wind event this year, I suggest this one -- we are no-nonsense, straight-shooting wind energy advocates. I hope to see you in Wisconsin in...
Complete wind energy system, ARE110 (2.5 kW, must be grid-tied), including turbine, controller, inverter, diversion load, and 127 ft ARE 4" pipe tilt-up tower...
If you're into DIY (aren't we all??) get an Arduino. An UNO board is ~$30, a datalogger board (aka shield) is $20, current transducers are available, the board...
We have used logging equipment recently from both APRS World http://www.aprsworld.com/ and Etesian. http://etesian-tech.com/ Both can set up systems for you...
I've used loggers and temperature sensors from this outfit: http://www.onsetcomp.com/ , and was very pleased. They also have split coil current transducers ...
29364
David Raine
dave@...
Apr 4, 2012 2:24 pm
Doug, if anything I've learned from this group and the industry in general is that it is not about certification, qualification or even quality. It is all...
Dear Larry Sherwood of SWCC and Yahoo Small Wind List: Below are links to a "Sunforce"; brand name of turbine branded by Coleman and marketed by America's four...
Hi Folks Data acquisition and data logging equipment has advanced a lot in the past few years. I'm wondering if anyone has any recommendations for voltage and...
Well, it survived the test. I was at the computer till 2:30 am because a friend and his son were out in the gulf in a 67 foot sail-boat on their way from...
29359
Nando
nando37@...
Mar 20, 2012 11:26 pm
In reality, the water pumper wind mills need to have one premise -- to extract water which it is life basic -- and any volume is welcome and needed --...
29358
randy young
judgeyoung@...
Mar 20, 2012 11:26 pm
Jim, I think that Doug was referring to a single guy wire that dropped down the center of a pyramid base tower to hold it down. I was anticipating a tri-pod...
Doug, as usual your explanation is flowery and tasty but I would'nt add the squared term in the RPM to power relation. IMHO, proportional only is good enough...
Tonight the 24' wood tower and 36' steel pole are getting a first test! Right now its 30mph gusting to 50mph (has been for 6 days now) and about 3 hours from...
Hey, I would be interested in that single anchor idea. How does that work? Mine is still in the down position (hurricane stowed)(picture attached) while I...
