O.k. guys after loosing an e-mail I finally got the info Again on replacing the VU lamps with LED's The lamps work off the + 24V rail of the PSU. The...
Sorry for the long delay, Got bit good on the arm by my cat. Was in the hospital with a serious infection, but i'm back know. The tech ran trace jumpers with...
Hey folks. When I first got my console, I would use it for a few days and then turn it off when I went away for a few days. Sure enough, each time I turned...
Hey guys. I worked at a place a while back and he never turned his off BUT he had a dedicated room just for the power supplies. Wish I had a room just for...
... Actually, that's one of the LAST things I'd look at....the line in / out function is logic controlled, all that switch does is send a control signal to the...
The line in / out switches on the monitor module does work on all channels but the one (the 36ch. line out light is always on even when the line in light is...
... Well, that's your problem right there! Those resistors are part of the circuit that control that LED. He's set it to be permanently on! Makes me...
In my experience with 6 consoles and about 20 channels stuck in line in or out, it is always the 2N2904/2N2906 transistors that cause the problems. Never the...
... The ones i see in the parts book are the 2N3904 and 2N3906 transistors are these the one's you are talking about? Thanks for the info. I still need to find...
... always ... almost ... OK, I guess my memory isnt what it used to be! I should have checked before posting. It is indeed 2N3904/2N3906. Thx for picking that...
if some people are still trying to source companies to make eq's for this console, iv'e been reading some threads on another forums about 500 series modules if...
I heard back from from Geoff Daking regarding making an EQ for this console and it's gonna be about $50K for 50 modules with the first module-the prototype-...
I have heard it. IMO go with a john hardy as it is much cheaper and definately a better preamp. Well I think so. Hold off as my nefve style preamps will be...
this is the first of 3 schematics for the potted IC's on each channel. I will post it in the photo section. This schematic is the DLO (differential line...
Finished the PC board layout on the preamp today. It rocks. duel opamp gain staging which will allow a gain from 8DB and minimum to to 70Db at mac gain it will...
Cool.. I can't wait to hear it. _____ From: sony-mxp-3k@yahoogroups.com [mailto:sony-mxp-3k@yahoogroups.com] On Behalf Of guitarrone2001 Sent: Monday, October...
Forgot to mention, custom input trafo, minimal parts, no pad due to gain of 8DB about 70DB. Pads just change frequency responce in a way I do not like. The...
When do you think you'll have one to send me to check out? _____ From: sony-mxp-3k@yahoogroups.com [mailto:sony-mxp-3k@yahoogroups.com] On Behalf Of...
What opamps are you using? Would the JLM opamp work? Might be cool to try.. they went for a neve kinda thing but in the biplar opamp style. D- _____ From:...
This is an open letter to any and all... I'm going to be making some studio changes here real soon. I'm probably going to be working out of another studio....
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
