Well spotted. I use the Build Library function, usually the known entries sub
choice, to avoid too much quizzing of the device by the
overly burocratric SoundDiver.

I had the Trinity only version at first, and in some ways preferred it for its
simpler minded operation. The module looked the same when I bought the ver3.0,
but had a few glitches until I updated to 3.05.
Having the printed manual helped as the default settings often slow you up; so
did an exploration of Galaxy from Opcode, many of the key features of SoundDiver
seem inherited from Opcode's brilliant program. You can for instance, copy names
from your patchlist and paste ino Excel directly. Takes quite a lot of faff to
do that from SoundDiver.

There were many problems with the CD authorizing on W98, but W2000 and XP are
OK. I do have a new error message when I start the program in XP but no problems
if I just plough on. Current usage mainly Triton Rack patch frenzy, but have a
pile of old stuff that works fine.



> Am 27.07.2009 um 16:46 schrieb apostulate:
>
> > Now, the problem is, I've been able to import libraries from my
> > Virus but for some reason I am unable to save them as a library on
> > my comp (Mac OS X 10.4.11).  The Save an Save As options are
> > blacked out.
> >
>
> You first have to create a new library (File/New or Cmd-N), then move
> the entries from the Device window to the library window (drag and
> drop or copy-paste). Then you can save the library.
> The idea is, you can have patches of different synths in one library
> file.
>
> Ingo
>

In answer to the posting of the TRRACK~1.PCG file with the question above:
No, not until you load it into the device it is intended for.
The ~ character denotes that the device or a CD writing software has truncated
the name, confusing things a bit.
It's the factory preload for a Triton Rack.
It's part of the set you get on the two 3.5in floppies, containing 3 or 4 banks
of Programs and 3 or 4 banks of Combination, the Factory Drumkits, and
Arpeggiator settings.
If you need it as SoundDiver I have it. It's 2.54Mb instead of the 446K though.
There are compatibility issues with the various Triton models due to sample ROM
variations.
The Songs are on the second disk. Korg have downloads of this on their site,
with instructions on how to re-create the floppies.

On Tuesday 28 July 2009, les_lmbrt wrote:
> There were many problems with the CD authorizing on W98, but W2000
> and XP are OK.

If you still care about using SD on Win98, check if those problems go
away if you rename "ASPIENUM.VXD" to "ASPIENUM.VXD.BAK" (it's normally
somewhere in the WINDOWS\SYSTEM folder).  If you don't need this
driver for something else, you can leave it like that, otherwise just
rename it before you let SD authorize and then rename it back to the
original afterwards.

> I do have a new error message when I start the
> program in XP but no problems if I just plough on. Current usage
> mainly Triton Rack patch frenzy, but have a pile of old stuff that
> works fine.

I guess you are talking about the "ping...burble" thing saying "Text
not found!" that comes up (twice!) when you start SD.  I'm still not
fully sure where this comes from (the error message is about a missing
text ressource really), but try the following: rename the "Universal
Module Cache.PRF" file in the Diver folder, then start SD, close SD
and let it save the Preferences file - this will rebuild the cache and
clean up any remnants from the main preferences.  Unless one of the
adaptations or modules has a bug that triggers this message it should
now be fine.  I know that things go wrong again when some adaptation
tries to open a MIDI port that does not exist anymore or has received
a different name or index, which is common with USB ports.  I
recommend to let SD only connect to MIDIyoke virtual interfaces and
connect those via MIDItrix to the real interfaces.  A description of
how to set this up in the Readme for the Blofeld adaptation:

http://Synth.Stromeko.net/Downloads.html#WaldorfSDada

Once in a blue moon SD will still come up with the error message and I
have to kill the cache again, but it doesn't happen quite as often
than it did before this setup.


Achim.
--
+<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk]>+

Factory and User Sound Singles for Waldorf Blofeld:
http://Synth.Stromeko.net/Downloads.html#WaldorfSounds

Thanks.  Will give this a try.  I had to end up just doing a midi dump using
SysEx Librarian, in all it's hexadecimal and ASCII glory.  I wanted to get all
the patches saved before I started overwriting patches with my own.  Well,
hopefully SysEx Librarian saved everything in good working condition.

Thanks again.

--- In sounddiver-users@yahoogroups.com, Ingo Debus <igg.debus@...> wrote:
>
>
> Am 27.07.2009 um 16:46 schrieb apostulate:
>
> > Now, the problem is, I've been able to import libraries from my
> > Virus but for some reason I am unable to save them as a library on
> > my comp (Mac OS X 10.4.11).  The Save an Save As options are
> > blacked out.
> >
>
> You first have to create a new library (File/New or Cmd-N), then move
> the entries from the Device window to the library window (drag and
> drop or copy-paste). Then you can save the library.
> The idea is, you can have patches of different synths in one library
> file.
>
> Ingo
>

--- In sounddiver-users@yahoogroups.com, ASSI <Stromeko@...> wrote:
>
> On Friday 22 May 2009, richie nehmad wrote:
> > me too. i can't find ANYTHING  on sounddiver.
>
> All the links that are still working for SoundDiver (including those
> to the manuals) are on my downloads page and it is the third hit in
> Google when searching for "sounddiver manual".
>
> http://Synth.Stromeko.net/Downloads.html#EmagicFTP
>
>
> Achim.
> --
> +<[Q+ Matrix-12 WAVE#46+305 Neuron microQkb Andromeda XTk]>+
>
> SD adaptation for Waldorf microQ V2.22R2:
> http://Synth.Stromeko.net/Downloads.html#WaldorfSDada
>

I just checked, SD 3.1.0 BETA2 (as well as most other legacy Emagic/Apple
software & drivers) is/are currently download-able here:

http://www.apple.com/support/emagic/

Direct Link -
http://download.info.apple.com/Apple_Support_Area/emagic/Legacy_SW/OS%20X%20SW/S\
oundDiver%203.1.0%20Public%20Beta%202.app.sit

-LW-

Hello all,



Been having some problems latley.



Two Sounddivers:



1. Full version 3, is working with a old Virus plug-in. Loopback tests all pass.

2. Virus OEM standalone version, most recent version loads up and then has
problems communicating with the Virus, can never get it to work. Complains of
communication errors, ask's me to do loopback test, which always fails.



So, I think instead of bashing my head trying to get the Virus OEM standalone to
work, I should just try to get the latest virus version for the Full version of
SD. Problem is that it's no longer on the Accees Home Page.



If anyone has access to the last Virus plug in for the Full Version of SD could
you please point me to it?



Final question: Can I extract the virus portion (.dll) from the OEM version and
shove it into my full version install folder of SD?



MANY THANKS IN ADVANCE.



RDP





_________________________________________________________________
With Windows Live, you can organize, edit, and share your photos.
http://www.microsoft.com/middleeast/windows/windowslive/products/photo-gallery-e\
dit.aspx

[Non-text portions of this message have been removed]

hi, i decided to install sounddiver 3.1.0b2  on osx 10.5.9  and have now a
destroyed logic pro 9. installing l9 didnt help, and i have tried to remove
sounddiver from everywhere, but i guess im just not doing it right. i've tried
to look through the web on how to uninstall a sounddiver on osx, but have been
unable to find anything. could someone please, pretty please, help?

which new sounddiver version is this? not the 3.1.0 public beta 2 is it?

--- In sounddiver-users@yahoogroups.com, "John Abram" <johnbabram@...> wrote:
> As Andy says, the new Sounddiver has
> no authorization requirements of the key. Contact me off-list if
> you're interested.
> --
> with best wishes,
> John
> http://abram.ca
>

Yes, it is.

2009/9/3 esaruoho <esaruoho@...>:
>
> which new sounddiver version is this? not the 3.1.0 public beta 2 is it?
>
> --- In sounddiver-users@yahoogroups.com, "John Abram" <johnbabram@...>
> wrote:
>> As Andy says, the new Sounddiver has
>> no authorization requirements of the key. Contact me off-list if
>> you're interested.
>> --
--
with best wishes, John

Hi All,

I've been looking through the Sounddiver manual and trying to figure out how to
use to Sounddiver to delete patches on my synth.

Okay, first off, I'm using Sounddiver Virus 3.1.0 and my synth is a Virus C.

I've tried the clear option under the Edit menu and then transmitting the
library back to my Virus C, but, the patches that I cleared are still there.

For my Virus users, I'm trying to clear the patches from banks A and B.

It seems like the Clear menu option is the correct one, but maybe I'm using it
incorrectly.

If so, please let me know how to use it appropriately.

Thanks.

BTW. funny thing that google seems not to understand that someone really wants
to write "sounddiver" instead of "sound driver".. =P

Hi,

Sorry if this is an annoying question, but just wondered if there was
still any way to get SoundDiver 3 for Windows? I had it years ago when I
was using Win98, and have a need for it now again, but can't find my disks.

Cheers,

Oli

hey i noted on the list a post about using the virus c include SD
program....

i am running OS X leopard with sound diver 3.1 beta and i have a few
questions:

1.  XSkey!?  gimmie a break i need to dig up my logic 4.5 key to use
this program?!?!

2.  on leopard the included virus c sound diver program (this is on
the CD rom that comes with the synth) will not work, any adaptations i
can D/L?

cheers and thanks for any advice!

nate

i justed got a roland JV-1010 but it didnot cone with a disk also im running
windows xp home

can anyone help

johnnyQ

Hi there anyone know a workaround so I can use Sounddiver on my G5
Dual Core with Logic Pro 9 OSX 10.5.8 and LP7 XS Key
It works well with LP8 but LP9 will not start with soundiver on same
machine

Am 10.10.2009 um 08:24 schrieb David Bulog:

> Hi there anyone know a workaround so I can use Sounddiver on my G5
> Dual Core with Logic Pro 9 OSX 10.5.8 and LP7 XS Key
> It works well with LP8 but LP9 will not start with soundiver on same
> machine

So does Logic 9 run on a G5 Mac?
According to Apple it requires an Intel Mac:
http://www.apple.com/de/logicstudio/specs/

Ingo

>Am 10.10.2009 um 08:24 schrieb David Bulog:
>
>>  Hi there anyone know a workaround so I can use Sounddiver on my G5
>>  Dual Core with Logic Pro 9 OSX 10.5.8 and LP7 XS Key
>>  It works well with LP8 but LP9 will not start with soundiver on same
>>  machine
>
>So does Logic 9 run on a G5 Mac?
>According to Apple it requires an Intel Mac:
>http://www.apple.com/de/logicstudio/specs/

Ingo is correct about the specs for Logic 9, but I have read several
forums where folks say they *are* running v9 on a non-Intel Mac.

Do you mean you have SoundDiver already open and running? I always
avoid this as there were known bugs where SD would affect Logic songs
and cause funny transpositions and problems in Logic. Better to open
SD, set up your hardware, quit, log out and back in and then start
Logic.

Regards - Colin

On 10 Oct 2009, at 13:40, Ingo Debus wrote:

>
> Am 10.10.2009 um 08:24 schrieb David Bulog:
>
> > Hi there anyone know a workaround so I can use Sounddiver on my G5
> > Dual Core with Logic Pro 9 OSX 10.5.8 and LP7 XS Key
> > It works well with LP8 but LP9 will not start with soundiver on same
> > machine
>
> So does Logic 9 run on a G5 Mac?
> According to Apple it requires an Intel Mac:
> http://www.apple.com/de/logicstudio/specs/
>
> Ingo
>



It runs but is not supported.

On 11/10/2009, at 1:40 AM, Ingo Debus wrote:

>
> Am 10.10.2009 um 08:24 schrieb David Bulog:
>
> > Hi there anyone know a workaround so I can use Sounddiver on my G5
> > Dual Core with Logic Pro 9 OSX 10.5.8 and LP7 XS Key
> > It works well with LP8 but LP9 will not start with soundiver on same
> > machine
>
> So does Logic 9 run on a G5 Mac?
> According to Apple it requires an Intel Mac:
> http://www.apple.com/de/logicstudio/specs/
>
> Ingo
>
>



yes it runs fine on a G5 dual core --tested 100% on 10.5.7 and 10.5.8

On 11/10/2009, at 2:00 AM, Andrew Capon wrote:

>
>
> On 10 Oct 2009, at 13:40, Ingo Debus wrote:
>
> >
> > Am 10.10.2009 um 08:24 schrieb David Bulog:
> >
> > > Hi there anyone know a workaround so I can use Sounddiver on my G5
> > > Dual Core with Logic Pro 9 OSX 10.5.8 and LP7 XS Key
> > > It works well with LP8 but LP9 will not start with soundiver on
> same
> > > machine
> >
> > So does Logic 9 run on a G5 Mac?
> > According to Apple it requires an Intel Mac:
> > http://www.apple.com/de/logicstudio/specs/
> >
> > Ingo
> >
>
> It runs but is not supported.
>
>

it runs 100% because LP9 is UB
Only issue is soundiver kills LP9---I believe it is fixable by copying
a file from a LP8 package or LP7 package
Im working the issue and will post a workaround--in the meantime read
here but the posters never got the solution quite right --they got
close but missed something out
http://discussions.apple.com/message.jspa?messageID=10122125


Dave

On 11/10/2009, at 12:05 PM, David Bulog wrote:

> it runs 100% because LP9 is UB
> Only issue is soundiver kills LP9---I believe it is fixable by
> copying a file from a LP8 package or LP7 package
> Im working the issue and will post a workaround--in the meantime
> read here but the posters never got the solution quite right --they
> got close but missed something out
> http://discussions.apple.com/message.jspa?messageID=10122125
>
>
> Dave
>
>
> On 11/10/2009, at 2:00 AM, Andrew Capon wrote:
>
>>
>>
>> On 10 Oct 2009, at 13:40, Ingo Debus wrote:
>>
>> >
>> > Am 10.10.2009 um 08:24 schrieb David Bulog:
>> >
>> > > Hi there anyone know a workaround so I can use Sounddiver on my
>> G5
>> > > Dual Core with Logic Pro 9 OSX 10.5.8 and LP7 XS Key
>> > > It works well with LP8 but LP9 will not start with soundiver on
>> same
>> > > machine
>> >
>> > So does Logic 9 run on a G5 Mac?
>> > According to Apple it requires an Intel Mac:
>> > http://www.apple.com/de/logicstudio/specs/
>> >
>> > Ingo
>> >
>>
>> It runs but is not supported.


Here is fix to get Logic 9 running with sound-diver--both now work
fine--tested on intel imac 24" 2.8 and G5 Dual core  both on 10.5.8
I will upload XSKey.Framework folder to files section
David
"EASY FIX:
Choose your old Logic 8.app and right-click to Show Package Contents
You will see an XSKey.Framework folder, r-click to copy it.
Go to Library\Frameworks and r-click to paste item.
Thats's it. "

Has anyone tried running SoundDiver in Snow Leopard (OS10.6.x) ?

I was wondering if it is compatible.....

Regards - Colin

I can't say that it runs without incident as I've experienced some
interrupted scans, but it does appear to run with my Kurzweil
K2600.standalone, with the XSKey.



Best,

Bob Leety

Moneta, VA



From: sounddiver-users@yahoogroups.com
[mailto:sounddiver-users@yahoogroups.com] On Behalf Of Colin Shapiro
Sent: Monday, October 19, 2009 2:23 PM
To: sounddiver-users@yahoogroups.com
Subject: [SoundDiver] SoundDiver and Snow Leopard?





Has anyone tried running SoundDiver in Snow Leopard (OS10.6.x) ?

I was wondering if it is compatible.....

Regards - Colin





[Non-text portions of this message have been removed]

>I can't say that it runs without incident as I've experienced some
>interrupted scans, but it does appear to run with my Kurzweil
>K2600.standalone, with the XSKey.

Thanks Bob. Even knowing it works for one person is encouraging.....

I'm also interested in yamaha G10c editor - I've one of this controller. Please
keep update the post and I'm tryng to start to do this adap.
bye

--- In sounddiver-users@yahoogroups.com, "danaljohns" <danaljohnson@...> wrote:
>
> Hi,
>
> I am trying to write an adaptation for the yamaha g10 guitar and I
> have a problem. I was starting to work on a bank driver, setting the
> number of entries and rows. The request regularly check box was set
> (inadvertantly). I don't have the request defined yet. In this case,
> SoundDiver continuously puts up a modal dialog and I must force quit
> the application. It appears I will have to delete the adaptation and
> begin again, unless there is some work around....
>
> Is there a way to edit an adaption without having the corresponding
> device active? I think I would like to edit several adaptations at
> the same time, is there a way to do that?
>
> I do have a few other questions that I will defer for now.
>
> thanks in advance!
> dana
>

I own a Korg SDD-3300 Triple Delay. When I start a request for all
programs of this delay in Sounddiver no names are displayed.
Sounddiver receives a lot of midi-data from the delay but shows no
program names in the adaption.
When I look at the data in the midimonitor I can find all names of the
transfered delay-programs. So I think that there's something wrong with
the adaption.
I want to program an editor, because at the moment for the SDD-3300 you
can use SD only as a patch librarian.

Does anybody know whats going on there?
Thank you.

Best regards




[Non-text portions of this message have been removed]

Howdy,

I have not used SD on my MKS for a few years and now its not working.  I have a
MOTU MidiExpress 128.  I can get my M1Ex adaption to work, but not my MKS70.
I am certain the cabling is fine, as when I hook up to Midi-In and Midi Thru on
the MKS, the loop back test passes fine.  I can do a manual bulk dump from the
MKS70, and see the midi dump on the Midi Monitor.  So this proves my out cable &
connector work.

It seems some how the SD adaption is not configured right???
In global I expanded to 8 buffers with 128 Kb per port, and still no luck.  I
tried some different Thru channels and Delays but still no luck.

Any suggestion what to try next?

PS: I did notice that in my hardware USB controllers, if SiS PCI to USB Enhanced
Host Controller is enabled SD did not pass the loop back test.  I have it
disabled when I run SD.

Mookie

Hi, are the MIDI functions on the MKS set up correctly? System Exclusive needs
to be on and I think the control channel needs to be 1.
Regards, Peter

--- In sounddiver-users@yahoogroups.com, "Robert" <matheusaleh@...> wrote:
>
> Howdy,
>
> I have not used SD on my MKS for a few years and now its not working.  I have
a MOTU MidiExpress 128.  I can get my M1Ex adaption to work, but not my MKS70.
> I am certain the cabling is fine, as when I hook up to Midi-In and Midi Thru
on the MKS, the loop back test passes fine.  I can do a manual bulk dump from
the MKS70, and see the midi dump on the Midi Monitor.  So this proves my out
cable & connector work.
>
> It seems some how the SD adaption is not configured right???
> In global I expanded to 8 buffers with 128 Kb per port, and still no luck.  I
tried some different Thru channels and Delays but still no luck.
>
> Any suggestion what to try next?
>
> PS: I did notice that in my hardware USB controllers, if SiS PCI to USB
Enhanced Host Controller is enabled SD did not pass the loop back test.  I have
it disabled when I run SD.
>
> Mookie
>

Am 21.11.2009, 13:15 Uhr, schrieb bellymcr <bellymcr@...>:

>> I am certain the cabling is fine, as when I hook up to Midi-In and Midi
>> Thru on the MKS, the loop back test passes fine.
>> Mookie
>>


Hi isn't it supposed to be MIDI-Out on the MKS?

cu
Malte

Howdy,

When I say it's not working, I mean that the SD does not recieve a MKS70 bulk
dump (which has to be done manually due to midi implementation limits of the
mks70).  Yes I hook up to midi-out, and midi-in when I try the dump.   The
interesting part is that if I use Midi Monitor in SD, I can see all the bulk
dump messages!!! they are just not being recieved in the adaption.    So that's
why I am guessing it's the adaption buffer setup, midi set-up, and or the
configurable delays ??? Not sure where to go next as I have played around with
these a bit.

SD is notorious though for not taking changes unless you blow away the
preference files ... so I tried that a few times as well.  Anyone got their
MKS70 adaption working can let me know what midi comm settings, buffer settings,
and thru/send delays they are using ...

Mookie


--- In sounddiver-users@yahoogroups.com, "bellymcr" <bellymcr@...> wrote:
>
> Hi, are the MIDI functions on the MKS set up correctly? System Exclusive needs
to be on and I think the control channel needs to be 1.
> Regards, Peter
>
> --- In sounddiver-users@yahoogroups.com, "Robert" <matheusaleh@> wrote:
> >
> > Howdy,
> >
> > I have not used SD on my MKS for a few years and now its not working.  I
have a MOTU MidiExpress 128.  I can get my M1Ex adaption to work, but not my
MKS70.
> > I am certain the cabling is fine, as when I hook up to Midi-In and Midi Thru
on the MKS, the loop back test passes fine.  I can do a manual bulk dump from
the MKS70, and see the midi dump on the Midi Monitor.  So this proves my out
cable & connector work.
> >
> > It seems some how the SD adaption is not configured right???
> > In global I expanded to 8 buffers with 128 Kb per port, and still no luck. 
I tried some different Thru channels and Delays but still no luck.
> >
> > Any suggestion what to try next?
> >
> > PS: I did notice that in my hardware USB controllers, if SiS PCI to USB
Enhanced Host Controller is enabled SD did not pass the loop back test.  I have
it disabled when I run SD.
> >
> > Mookie
> >
>