The Yahoo! Groups Product Blog
- Members: 709
- Category: Energy
- Founded: May 7, 2001
- Language: English
Yahoo! Groups Tips
Did you know...
Message search is now enhanced, find messages faster. Take it for a spin.
Show Message Summaries
Sort by Date
We need more minds of all kinds...including skeptics, disbelievers,
etc... You're welcome regardless of your opinion on FE!!!
A group dedicated to exploring Tesla type technologies for tapping
into Radiant Energy (RE) or Zero Point Energy (ZPE) through abrupt and
unidirectional electrical impulses into cells with diamagnetic
Radiant Energy equals Zero Point Energy or Random Fluctuation of the
Active Vacuum. This energy source is not entropic; it could
self-organize under certain conditions. It could be tapped into using:
1. Sharp Gradients or Abrupt electrical discharges at a certain rate
2. Cells with diamagnetic dielectric materials such as water
molecules, bismuth, etc
Our study into tapping this new form of energy source emphasizes the
Bedini Systems. We have started with discussion and building of the
basic SSG, from there we shall move toward more advanced and complex
I found a file that explains it (to a degree).
and (as I understand it) it is DC that is built unto a breaking point.,
and the dielectric is the key.
It may still be in alt.binaries.ebooks.technical keyword - Bearden
Ed Scanlan wrote:
> Telsa rectfied the pulses of a HV charged capacitor by use of a strong
> permanent magnet. This magnet was placed with its field perpendicular
> to a discharge path. This field was arranged to provide that no
> reversal in current occurred. The impulse was then fed to a coil
> which housed a secondary which drove the voltage upward considerably.
> The whole thing was tuned via the variable distance of the spark gap.
> That's my understanding of it anyway.
> On 5/31/07, Louis <malklaka2012@...
> <mailto:malklaka2012%40softhome.net>> wrote:
> > Does anyone have information on constructing a true "Tesla Impulse
> > Transformer"?
> > I have been building Tesla Coils for over 20 years, only to discover
> > recently that the typical "Tesla Coil" as the public knows it was
> NOT the
> > true "Tesla Impulse Transformer" as used by Tesla in his wireless power
> > experiments.
> > I grasp the main difference -- rapid, intense pulses of DC rather than
> > oscillating AC -- but have not been able to find much in the way of
> > specifics, other than mass balancing of the primary and secondary.
> > If anyone has information, I would appreciate the input. Otherwise, I'll
> > keep you all informed as I proceed to re-invent this particular wheel.
> > Many Thanks,
> > --Louis
> > Yahoo! Groups Links
--- In email@example.com, "Keith Nagel" <knagel@...> wrote:
> So Harvey really seems to have disappeared. Anybody know what
Hello group, this as a long time friend of Harvey, perhaps he's
mentioned me in some of his earlier posts. He's written me a letter
and asked me to post it for him, so here it is:
Hello folks, this is Harvey Norris writing from a jail cell.
On my birtday, Sept 7 I was sentenced to six months for DUI's. If I
stay the whole time my release will be on St. Patrick's day. I have
used the good graces of friends [that would be me] tp send this
letter.Brother John says that it is odd because the catholics believe
that Sept 7th is Virgin Mary's birthday. Ant one ever hear of that?
Anyways to get down to business. I need someone on the list:
preferably a Lot of people on the list, to write the judge so that I
might obtain an early release. I have prepared a letter to the judge
so that people could use to send. It should be published in my next
letter to the group.
Now my address here in jail is
Portage Justice center,c/o Harvey Norris DM5
8240 Infirmary Rd Ravennea, Ohio 44266.
I would certainly appreciate any correspondence from list
members and I would certainly appreciate it if someone could locate
Tesla's short autobiography and copy and send it here. I started
writing my own and I would like to see his again.
I need one of the administators or any one on the list
willing to take charge to write me as soon as possible so that I canI
can send them mail back to post on the list. I don't want to burden
my brother Micheal with this responsibility. End of letter
tesla had not the tech stuff we have today. i found a way to design
his coils for 99% eff. am looking for a builder to be partners with
me. all profits from my designs would be a 50-50 split. in writting no
problem.he missed so much but if he didnt live then, wed not have his
stuff. anyway, i hope to hear from some one soon. im at
Just out of curiosity which of his coils are you
referring to and what changes did you enact to make
them more eff....
--- greazyfriend1963 <greazyfriend1963@...>
> tesla had not the tech stuff we have today. i found
> a way to design
> his coils for 99% eff. am looking for a builder to
> be partners with
> me. all profits from my designs would be a 50-50
> split. in writting no
> problem.he missed so much but if he didnt live then,
> wed not have his
> stuff. anyway, i hope to hear from some one soon. im
Never miss a thing. Make Yahoo your home page.
This is Yours Truly, Harvey D Norris, released from exile on
account of robbery of vacant homestead while incarcerated. Lawyer
secured early release so that I could inform police of missing items.
The thousand dollars worth of aluminum square tubing purchased for
the magic square coil project is stolen. Almost 15,000 ft of
insulated 14 gauge wire that I used to demonstrate the properties of
expanding time into voltage to show a 420 degree phasing circle has
been stolen. A heavy step down transformer weighing over 500 lbs was
stolen, this amazes me that such a heavy item could be heisted. The
special spiral megacable coils used to demonstrate magnet
incandescence is stolen for the second time! All of the music
equipment where I had secured a meager income from is stolen.
Almost every asset used here on the 582 member teslafy internet
list to discover new principles in physics has been stolen, even the
ferrite used to demonstrate ceramic magnet incandescence. I now have
a better argument to show why the energy output of this process
obtained from electrical resonance is greater then the equivalent
amount of energy that is inputed, and this also shows a conversion of
time itself itself into energy. I have no doubt that when these
energy inventions are further refined to conclusively show that time
itself can be converted into energy, that this discovery will rival
that of Einsteins theory of relativity, where my first objective is
to repurchase 15,000 ft of 14 gauge wire, to once again set up a
demonstration of time distortion, and to relentlessly advertise this
unbelievable demonstration of distorting time itself to the academic
community to the local Kent State University Physics Dept for
verification. Even the motor powering the alternator to show this
process is stolen, but I shall persevere and resurrect all of these
past inventions to display to humanity, where the theives that have
for the second time stolen off of me shall soon come to realize the
magnitude of what they have done; where they have not merely stolen
from me, but all of humanity.
I thank the Judge Barbara Watson for allowing me an early
release to resume my scientific work. A strange thing happened in
this robbery, where I note that these things are like the holy grail
of physics, which is the creation of three opposites in time, or a
trinity of opposition, which in our dimension can only reveal itself
as a duality of opposition in time. It was for the purpose of this
symbolism that I had aquired three chalices or pewter cups arranged
in a triangle in which was placed three different crystals, of colors
emerald green, violet and transparent. Strangely these expensive
items were not taken during the robbery. Is someone looking down
Let Us Pray in the spirit of Christ's emergence in time some
2000 years ago. Father in heaven I thank you for the priviledge of
having the wealth to explore the mysteries of your creation. Let not
anger dwell in me for all things occur by thy will. Let justice be
done to those who would prevent these mysteries from being
During the first stage of robbery here,over a year ago, some 500
lbs of copper coils, over 50 miles of fine 23 gauge wire, were
stolen. Many pictures of these six huge 80 lb coils used in the
invention of the flux capacitor have been shown here on the teslafy
internet group. The first coil was stolen by Joe Digrino, according
to the testimony of his son, Joe Digrino Jr, who later admited to the
theft of all the rest of the missing copper in many forms, totalling
over 500 lbs, over 3000 dollars easily according to what I paid, not
what it would cost now to replace. Joe Digrino Jr, was never
prosecuted by me, as when I offered a reward he admitted to the theft
and did give me a mere 150 dollars in restitution. I have named both
suspects to the police in the second theft. Joe Digrino Sr has also
commited deviant sexual acts and is listed as a sexual offender. He
recently has been released from prison for fondling his
granddaughter, his own daughter called the police on him. When we
were young he once scrawled obscenities with lipstick on my mothers
bedspread and left a rubber there, while my parents were on
vacation. Of course he does not admit to this, but he and I were the
only one in the house, and I was busy putting out a fire that almost
burnt the house down. His son Joe Digrino Jr fled to Florida to
escape DUI charges, and has since returned and is still a fugitive. I
am mailing this letter to the Judge Barbara Watson to ask her to give
Joe Digrino Jr the same penalties I have recieved,should he again
appear in her court; in light of the fact of these other criminal
actions on his part. Her address is
Portage Co. Couthouse/ att Barabara Watson
203 W Main Str.
Ravenna, Ohio 44266
If any of the 582 members of the teslafy list would wish to also
express their outrage at what has occured here, I would also invite
them to copy this letter and mail it to the Judge, as I will do.
Sincerely pursuing the mysteries of time itself;
Harvey D Norris
The Einstein paper was trivial garbage,
the SRT (Special Relativity Theory) paper.
Anyone can get the little book at their
local library and read it ... there NEVER
was a constant velocity of light measured,
nor theoretically demonstrated. It was
purely a political decision by aristocrat
publisher Planck, and later the whole covert
western physics establishment.
Read Sommerfeld and Brillouin, each ten-
times more brilliant, or a hundred times,
than Planck or Einstein.
Here is the true physics, and references:
Einstein, when he wrote the SRT paper had
not even learned algebra yet ... so his
wife, a much better mathematician, did the
math for him. They did NOT derive a constant
velocity of light in SRT, they DEFINED
light velocity as constant otherwise the
algebra was beyond their COMBINED capability!
Anyone who reads English know this, as the
paper was short and easily readable.
Later, after being invited to 'teach' at
Princeton [to learn math and physics so he
wouldn't embarrass the physics guild], Einstein
(oops) made a baby with one of his students.
His wife divorced him, and when the covert
institution later gave him his 'hush-money'
gift of a Nobel Prize, he gave the cash to
his former wife.
If you want to know more about gangster physics,
read up on how young elite (and German) Planck,
his family close to the Siemens Corp, was
offered the Chair of the Vienna (Austrian!)
Physics Department in 1906, over the much much
senior and brilliant Austrian Boltzmann!
[Boltzmann's work reflected the phenomenally-
based physics of his colleague Ernst Mach, and
thus a chance for a true physics to reach the
public, which had to be put down.]
The emotional Boltzmann committed suicide.
-- In Electric Universe, Geroge DeCarlo wrote:
Has there been an article written from the
Electric Universe model challenging the supposed
limit of the Speed of Light on travel?
Let us take the no.s 1-49 and form a horizontal uniform numbering
array, repeating this for 7 rows of 7. Now let us equate each of
these 7 no.s with a musical note from the first basic key of C for
simplicity, where this first basic key has no sharps or flats. Now
the entire chart will be a lateral sequence of the notes CDEFGAB in
lateral repetition. We may not have many music theory students here,
but some may recall that the musical staff contains 5 lines, and a
memorization for the notes associated with the five lines starting
from the bottom upwards is the sentence; Every Good Boy Does Fine,
where the capitals contain the notes associated with these staff
lines, and the notes placed between the staff lines read from the
bottom up FACE. If we now re-arrange these no.s into a magic square
arrangement where the no.s carry each associated musical note, the
no. 1 will start in the center of the first horizontal row and will
read vertically the C major scale CDEFGAB. The vertical column to the
left will be its relative A minor scale ABCDEFG. Every other
vertical column will be a different starting letter succession of
these notes. Viewed horizontally every letter will be a succession
of the staff lines EGBDF and the interposed notes FACE, where E & F
are used by both sequences. An octave is composed of eight notes but
not all the notes have a sharp or flat between them,(these are the
black keys between the white ones on a piano) if they do the note
progression is referred to as whole steps that have a sharp note in
between them, but between the notes B&C and E&F there is only a half
step, making an octave not 14 half steps but 12 instead. A major 3rd
is comprised of four half steps, a minor 3rd of three half steps, and
a major chord are these two different thirds placed together in that
order; where a minor chord reverses this order. As a result any
horizontal three notes appearing in succession on this ordered magic
transposition of the C major scale will be either a major or a minor
chord, and actually another method other then the three laws of
diagonal progression can be used to predict the location of other
no.s on the odd sided magic square: this again is the chess knight
movement. If we look at the horizontally ordered sequence of 1-49,
and move like a chess knight down to the next layer from the left
corner starting no. 1, we encounter the no. 10; and continuing this
sequence of moving a chess knight down each time one layer, the
sequence reads 1,10,19,28; which become the four numbers in
horizontal succession from the starting top center no. one of the
magic seven square arrangement.
Actually these things were found in retrospect as first I had
used the balanced eight square arrangement where a single row then
contained an entire octave where I used both the low and high notes
of the octaves as the beginning and ending of the rows, and then
picked two rows in random to form a musical duet, which didnt sound
to bad, but it seemed like I was getting a lot of duplicate notes on
each of the duets. But seeing the enormous amounts of different rows
and columns that might be combined to form duets, it seems like it
might be possible to form some kind of musical composition based on
balanced mathematics. It was only when I started using different
size squares to try this out that I found the organization inherent
in the seven square. I have barely scratched the surface here on the
idea but I would imagine it should be tried first with a 12 * 12 grid
where all the half steps can be included; and I also imagine that
this would show melodies formed in a totally haphazard manner, as
then we should find formations including many off scale notes.
Anyways nothing ventured, nothing gained.
I played an amusing trick on inmates while in jail. I tore a
deck of cards up into quarters and marked 64 of these into the no.s 1-
64. I then said watch closely and if you can repeat what I do, then
I will award you some food from my commissary. I then started from a
corner and placed no 1, then moved like a chess knight for move no. 2
ect on down the line till all 64 cards were placed on the board, then
I went backwards and starting picking up all the cards in reverse
order so that the next person could watch this and try to duplicate
it. As I have explained before this is a very unique solution to
this maze where there are probably millions of incorrect sequences
where they end up trapped by there own past movements, and can no
longer move to occupy all 64 squares. Of course it is nigh
impossible to memorize all these correct 64 moves, and seemingly one
wrong turn anywhere in the maze except for the the last four moves
will lead to entrapment which I didnt have to memorize this entire
sequence, instead yours truly, seven of nine, was able to discover
the secret code to the sequence! (this is also a clue!). When people
asked me how I solved this maze I simply dumbfounded them by saying
well look at all the numbers here on completion of the maze, all the
rows and columns add to the same no., so I merely added these numbers
up in my head as I laid them down! No way they exclaimed, that would
be impossible! So I made the puzzle a little easier for them by
first laying down half of the numbers and giving two clues to how the
code works; which I will try to repeat here. But first the following
is of interest as I also enjoyed the many clues gained from codes
found in the movie "The DaVinci
Melody Deciphered in DaVinci Code Chapel
ROSLIN, Scotland - Like a plot from "The Da Vinci Code," a team of
code breakers claims to have found music hidden for 500 years in
intricate carvings at the church where author Dan Brown set the
climax of the best-selling book.
The 15th-century chapel, 10 miles (16 kilometers) from Edinburgh, was
built by Sir Gilbert Haye and Sir William Sinclair and is steeped in
the traditions of the Knights Templar and Freemasonry.
Father and son team Thomas and Stuart Mitchell say they deciphered a
musical code hewn into stone cubes on the ribs supporting the ceiling
of Rosslyn Chapel in the village of Roslin, near Edinburgh.
"Breaking the code was a true eureka moment. It's like we have been
given a compact disc from the past," said Stuart Mitchell, 41, a
music teacher from Edinburgh. "But unlike the fiction of 'The Da
Vinci Code,' this is a tangible link to the past."
The Mitchells' research centered on the ribs of a ceiling in the Lady
Chapel. Rows of carved angels play instruments above the columns of
The elder Mitchell, 75, who was a code breaker for the Royal Air
Force during the Korean War, said he spent 25 years working at the
"Many of the angels had musical instruments and some were arranged as
a choir, but there was one angel we couldn't work out," he
said. "Then we realized she was carrying a musical stave, the lined
blueprint for musical composition, and therefore we were looking at a
coded piece of music."
The five-line stave that Mitchell believes the angel is holding came
into general use in the 16th century in the West, music historians
The science of sound
If the Mitchells are right about the meaning of the shapes, the
people who built Rosslyn Chapel between 1446 and 1486 knew something
about the science of sound that wasn't generally known in the West
until the 1700s.
The Mitchells believe the patterns on the cubes are Chladni patterns
created by vibrations of musical pitches.
The patterns are named for Ernest Chladni (1756-1827), a German
musician who is also remembered as the inventor of the glass
Back to the subject at hand here which is the 64 move chess knight
I began to wonder if the Knights Templar knew of this code to
initiate its members or some such far fetched thing because of the
numbers used to solve the code. In the Scottish? rite of
Freemasonry, there are 33 degrees in the order: It is on the no. 33
that the code for the entire square sequence begins to be used. And
the flag of the Knights Templar is a white flag with a lateral red
cross, is it just a coincidence that for the non quadratic even magic
squares this pattern is a segregation where numerical members on the
lateral red cross exchange positions only among the geometry of the
lateral red cross?
A code of movement exists whereby moving a chess knight 63 times, all
64 squares may be visited without becoming trapped in the maze. This
code when known shows the future location of every move by the
location of the first 32 moves.
Clue 1: 32 is the number of the difference of the squares that
establishes the code on one dimension; but having more then one
answer; only one answer is obvious.
Clue 2: 33 shows the method of the code on a different dimension.
About 25 wrong moves can be made from this halfway point, and I dont
imagine any of those will lead to the end of the maze, except one of
them will, but then all the rows and columns would not add to the
Perhaps Marilyn Savant? might solve this one, as even if the maze was
completed, the main clue might not be fathomed.
Lots of music both old and new has been written using this type of
"magic square" musical numerology. Around the year 925 the musical
world had settled into a Staff of 4 lines and this was used for about
another 400 years before the the 5th line was introduced.
This type of musical thinking culminated eventually evolved into the
12 tone system of Schoenberg, Berg, Weber, and the recently deceased
Karlheinz Stockhausen. Numerology sequences were sometimes used by the
eclectic John Cage, (not to mention star charts).
J.S. Bach was famous for sneaking in his last name (h is b natural,
and b is b-flat in German) into his fugal compositions.
So could the Knights Templar have hidden messages in the music?
Surely! Just gotta pick the right tunes, I guess!
I have essentially returned to duties, having gained most freedom
back to homestead, and purchasing HP pavilion laptop for work and
connection to internet now on a more routine daily basis. It has a
camera thingy for web cast. I saw a perpetual motion magnet thingy on
You tube, from watercar group. I have a lot of things to finish, but a
start is good.
I am most concerned and pissed off that the basis of my work has
been destroyed, but it good for me that these records exist. Now the
first barriers to Reconstruction are mentioned. Radio Shack Mega Cable
Speaker Wire Spirals are no longer sold by the outlet; according to the
first spokesman I met. This kind of flattened braided insulated wire is
vital for my square primary conductor high frequency transformer
plans. I must of course find a replacement.
We invite you to drop by and visit us at booth 31042 in the gold room
at the Las Vegas convention center. We also ask that you visit our web-
site for updates and current news at www.nanolube.net
Chris Arnold (president & Inventor of the patented breakthrough
technology behind NanoLube TM, "The Best Lubricant on Earth!)
In a winding of square type; at first consruction methods involving
spiraling another insulating "tetertiary winding" amidst the insulation
of the square windings of the outer structure made to contain
significant internal capacity: many difficulties were first found with
the concept construction wise. The first of these are he turning of
corners on four square per wind is that the spiralling outer wind meets
itself on the fourth change and the ove.
I see my test went thru- lately I doubt things so I test. Or is that
teslafy? A construction problem has arisen from the past and the
necessity for re-design of parts upon order; half of which has arrived.
Now the design is considered with five sides rather then four for the
purpose of return journey interwind; practically the whole crux of the
biscuit of my investigation; which my notes reveal as a lorentz force
transformer. The magic square theory where I formerly made the
speculation that the numbered order was the formula for maximum
internal capacity is reasoned to be false during my long stay in jail;
when numbers are quickly better fathomed according to their validity in
numerical schemes. Here we merely need concentrate on square windings
using diagonal layerings, but for starting considerations five segments
per wind should be used. This is for the grand purposes of spiralling a
wind around a wind sensibly; serving both he purposes of its insulation
and its possible secondary. I could of course try better to forward
the whole problem, but it is in notes to be used.
Am I here? Okay.
I am now resuming some ideas concerning Teslas Coil for
Electromagnets, and submit a theoretical design to the tesla list for
comment, as I would rather see why something will not work before
expending funds again... All of my former assets, 50 miles of 23
gauge wire, 15,000 ft of insulated 14 gauge wire spools whose primary
use was conjuction for source frequency (continuous wave) resonant
voltage rise at alternator frequency near 480 hz; one thousand
dollars worth of square aluminum tubing, a dozen Radio Shack Mega
Cable Speaker wire spirals ect on down the line; all of these things
were taken during robbery of my homestead while incarcerated for a 6
month period, whereby I was granted early release for identification
of stolen items.
Teslas Coil for Electromagnets deals with creating a higher
internal capacity via winding method, but the subject is introduced
from only the first consideration of a returned layer wind, which is
actually the lowest form of energy storage if the coils are
considered from the multi layer standpoint and utilysing square
shaped conductors. The next method is using zig zag lateral
layering; whereby viewed from the axis of wind each layering will be
in opposing winding direction but also opposite current directions
thus they are in magnetic unity, and generally one third more
internal capacity is made by this conventional winding method, simply
for the fact that the energy storage value based on the relative
voltage difference between winding surface areas is a exponential
function, and therefore the winding design that can interface the
highest voltage differential between windings initially becomes the
concern, but this also depends on choice of arc gap and any
additional capacity to be added. Richard Hull's Clorado Springs
commentary for July 8th shows a primary arc gap schematic he dubbs
the Tesla Equidrive Tank Circuit. This shows the arc gap present
before the addition of two equal capacities on either side of the
break and then connection to the primary coil as its middle
component. What I would intially propose is to use square aluminum
tubing of 1 ft* .5 in *5 in as the primary windings, and the Mega
Cable Speaker wire as the insulation between windings. The
connections between the corners of the winds can be negotiated by
sanding down dowel rods to fit down the interior of the square
aluminum tube leaving 4 open internal corners on the endings, of
which four strands of grounding wire can be inserted for a tight
surface area connection between segments of the windings. The Mega
Cable Speaker Wire here is ideal for the purposes at hand, having two
flattened braided wires inside the PVC insulation and the external
width of both the square tube primary and its intervening coil
winding are good for construction. The aim of the Lorentz
transformer is to procure simultaneous electric and magnetic field
interaction at right angles across, or more properly through the
width of the intervening secondary coil wiring inside the insulation
of the primary winds which is composed again of square aluminum
tubing. To do this the first premise is presented. If we visualize
the magnetic circles around the conductors arranged to produce an
external magnetic field, we find that internally between the windings
of a multilayered coil, all the magnetic circles are in opposition
with their neighbors, but externally the magnetic circles are in
agreement. If we reverse this scenario, internally between windings,
(the location of the secondary coil) the magnetic circles will be in
agreement. In such an arrangement as a high frequency transformer,
the Megacable Speaker wire in analogy could fuction as the secondary
exciting a tetertiary third helically wound magnifier coil with
smaller gauge wire. The first consideration here becomes the
reduction of primary inductance by virtue of this "scalar" design,
and the Pandora's box of paradoxical consequences that is opened up
once conjecture begins to take place. Another item to be replaced
from the ransacking of my assets is the spool of paper coated steel
wire,(used on bread bags) that I had wound several hundred turns
around a four segment aluminum square tube wind to look for changes
of inductance by LCR meter, but understandably no changes were seen,
this more then likely due to the instruments sensing signal, but this
opens up the first question as to the use of the design employing no
high frequency effects, but ordinary source frequency transformer
design at 60 hz.
Question 1: One the one hand considering both the angles of the
interwinding electric & magnetic fields being created by a design
that minimizes the possible external magnetic field but enhances it
internally, For a multiturn primary could we not use iron spiralled
loops around the windings so that the shape of the ferromagnetic core
itself is used for the secondary winding? This obviously is not a
good idea due to the resistance of steel wire, but it opens up other
imaginations for design such as again intervening MegaCable speaker
windings wrapped around the the inner and outer lengths of square
tube steel pieces made as steel sleeves fitting around the
circumference of the square aluminum windings, one of the few things
left from the robbery..., But here the paradox opens because
contradictory principles are at play. The first objection to the use
of iron to increase induction in primary loops is addressed by the
LCR readings themselves and perhaps the non linear factors involved
with ferromagnetism. Would the idea of a "honeycomb" like iron
structure, in which the iron surrounds the windings themselves
instead of the windings surrounding a toroidal silicone iron loop be
applicable in transformer theory, possibly to reduce the amount of
iron itself used per amount of power transfered? There seems to be
an explanation for many things easily overlooked without considering
that ferromagnetism has a saturation curve that also has a bottom
end, and perhaps for example if I built a nine turn primary with
windings surrounding by steel sleeves, I might never see the effects
of ferromagnetism due to the fact that the amount of amp turns needed
to engage the "ELECTROMAGNETISM" of the volume of ferromagnetic
material being stimulated by said method of a certain amount of amp
turns necessary to cause said magnetisation; BY DOGIES, if this
investigation might show that if a honeycomb iron core with windings
creating internal magnetic harmony might possibly USE an amount of
amp turns FAR below the normal external method; then in fact if that
were true, we must admit that Tesla's Coil For Electromagnets might
be the most cryptic patent of all time; almost like leading one into
a maze whereby only one possible solution is presented upon exiting
the maze: the hidden meaning behind the statement that increasing
internal capacity in a coil is an effective way to stimulate
electromagnetism, but Ha HA Ha I laugh because I doubt if even he
himself realized the ramifications there, but if he did he must have
been the most secretive person of all time; simply because once we
have glimpsed a magnificent thing we could barely be able to hold
such a thing to ourselves; and we would be out and about to preach it
to the rest of the thinking world!! There are also, in my opinion
clues here to the wireless transmission of energy through the ground,
where the concept of a high frequency resonant antennae design comes
into play, whereby there becomes no need for the receptor antennae to
employ a discreet external capacity to vibrate: instead that needed
capacity is itself interfaced with the earth ground on both sending
and recieving stations. A modification of the magnifier principle is
imagined whereby the actual line coupled connection is eliminated and
the tetertiary is itself grounded capacitively identically to the
amount on the sending station, and placed in distance from the
approximation of what becomes the quarter wavelength linear distance
between sending and recieving stations accomplished at the sending
station by the splitting of that primary coil itself in two; by
allowing the primary arc gap to be placed not before the arrangement
as mentioned in the Hull schematic, but after the LC components
electrical travel path: in other words the literal midpoint of the
entire length of the circuit occuring in the middle of the primary
coils winding length. In this alteration of arc gap position the
distinction between "acting" internal capacity and "midpoint open
circuit" capacity becomes apparent. Consider a nine wind square
primary winding laid in three lateral layerings. For all cases 12
internal segments between winds exist as actual internal capacity.
Then we consider the charge alignment on the surface areas of the
square conductors when open circuit is made at the midpoint. For an
even number of conductors arranged in a square array. such as 16, the
division of the coil into two allows four surface areas on each four
center winds to function as plate areas for deposition midpoint open
circuit charge, so this is the "actual" capacity present at arc gap
cessation for use in calculations involving Thompsons resonance
formula, only now that capacity exists inside the coil (which becomes
an additional complication) and for purposes of comparison we imagine
different winding schemes, whereby the ratio of total
internal capacity surface areas vs the open midpoint circuit
capacities is compared. At first I had contemplated that magic
squares used as the wind succession numbering method might be a code
as to ascertaining the highest internal capacity present as a winding
method, but during my long stay of incarceration I soon saw the
fallacy of my theory, so to speak: which is actually a good thing as
enormous complications are then removed by simply directly going to a
diagonally layered inverted cone design constructed primary coil of
three layers, but unfortunately unequal numbers of winds; but however
the necessity of this as a first model becomes understood as a first
easily built and tested hypothesis. The aim here is to make a coil
with the highest midpoint open circuit capacity, (MOCC) by winding
method, and the first puzzle is shown. Suppose we are given 64 one ft
lengths of of these 1/2 in wide aluminum segments, and told to form
a plate capacity with them which then consists of 32 to a side,
making one ft by 16 inches plate capacity. Now the requirement is
made to use only 36 pieces instead of 64, and still construct the
same amount of capacity, which is done instead by using more than one
side of the conductor for the MOCC, and diagonal layering methods. In
the first case of 9 square, the center open circuit as a split wind
no 5, have half of their total four surface areas are active as MOCC
surface areas, but the edge windings only use one conductor side for
MOCC, yeilding 4 internal capacity surface areas out of 12 for
possible use. Using the diagonal layering in the first odd magic
square of 9 uses 8 of the 12 as MOCC for surface areas. Using a
square winding structure we can use four arrays of 3*3 windings
connected in series with 32 internal MOC capacities with each wind
going through four of the arrays of nine concentric windings, for a
total of 2/3 usage of possible internal capacity. We next consider
the scheme using closer total usage of surface areas using first the
analogy of 10 winds, four arranged as a central diagonal, and six
arranged around it in fashion so that the beginning and ending winds
of the central arc gap can conect to either end of its surrounding
inner and outer conical diagonal windings alternating on either side
for highest relative voltage across adjacent surface areas between
the conductors. This arrangement still does not do full justice to
the idea, which is to employ all four surface areas for the MOCC
function, which in this case for 16 winds only 3/4 of the winding
surface areas is exploited. But a game plan for initial construction
it seems sensible as a first enquiree, and not waste time with
insensible designs. Here many blind alleys might exist, such as the
following; In particular we might wonder about the possibility of
minimizing hetzian EM by having the possibility of its own primary
windings, which will always occur with an odd number of windings
placed into a square array where the center point will be the center
winding; In contrast an even numbered amount of windings has its MOCC
point placed on an external winding, if this is correct. Surrouding
the arc gap with primary windings might sheild the hertzian EM?
In any case a distortion of Thompsons resonance formula, should
be readily evident in the building of tesla coil primaries using
adjacent insulated square windings since internal capacity must be
measured in the equation in light of the fact that midpoint open
circuit capacities can be measured and logically explained by winding
succession method and midpoint open coil circuit break. Now we
venture into thoughts concerning capacity in a primary tank circuit
and how it lowers the natural vibration. Surely the first thing to be
investigated here is to set up a high frequency vibration whereby
equal external and internal capacities are used, which in this case
is easily procurable by using the aluminum segments themselves
arranged into different geometries. If in fact we added an equal flat
plane capacitor of 64 aluminum segments to the same 36 pieces used
used to procur the same capacity, from the midpoint open circuit
break; and measured the total capacity present from the capacity
placed at midpoint in addition to the capacity present in the coil,
the meter reads those two capacities placed in parallel, as would be
suspected; but if that external capacity value were used internally
it lowers the coils natural vibration by half as would be expected,
but not by formula when using the external capacity alone. If the
same amount of capacity could be attached instead in series OUTSIDE
the coil appearing itself in series with the midpoint open circuit
capacity, as is shown by Hulls schematic then the role of added
capacity to lower the vibration would seem more efficient as then
twice the total capacity is charged externally to half the input
voltage if the coils as a midpoint load is not considered, which is
obviously untrue, as then it has its own capacity to be discharged
as the pathway to arc gap.
I am aware that a vertical TC secondary is base grounded, and that it
is a forced node of the high frequency created by the primary arc gap
L and C values. Is it very common to ground one side of a primary arc
gap? If so is not an arc to ground creating an electrical wave in the
earth? I have previously considered a design for wireless energy
transmission predominantly through the ground that uses some unusual
features and have most of this written in wordpad so that I can
submit it later. However this becomes the first question; can the
sending station arc to ground via the primary arc gap?
From this point I would prefer to use a very high frequency and
locate the secondary NOT over the sending primary, but at the distant
location one quarter wavelength away. Several different things might
be tried as what might be called resonant antennae design will be
tried. This will be somewhat of a costly project as sectioned square
aluminum tubing will be used for the primary(s) and the primaries
capacities used for resonance will consist of the placement of
dielectrically enclosed flat braided copper windings serving as an
Oudin like primary connection for the secondary. Essentially two
inverted conical constructions current wise using five segments to a
wind. (Notes to wireless group from other records in notepad) HDN /
Apology for segmentary records...
--- In firstname.lastname@example.org, "Harvey D Norris" <harvich@...> wrote:
> Back to the subject at hand here which is the 64 move chess knight
> I began to wonder if the Knights Templar knew of this code to
> initiate its members or some such far fetched thing because of the
> numbers used to solve the code. In the Scottish? rite of
> Freemasonry, there are 33 degrees in the order: It is on the no.
> that the code for the entire square sequence begins to be used;
Remember seven of nine ? The code is based on those two numbers.
> A code of movement exists whereby moving a chess knight 63 times,
> 64 squares may be visited without becoming trapped in the maze.
> code when known shows the future location of every move by the
> location of the first 32 moves.
> Clue 1: 32 is the number of the difference of the squares that
> establishes the code on one dimension; but having more then one
> answer; only one answer is obvious.
The difference of the squares are squares of numbers, of which the
difference is 32. The square of nine is 81, and the square of seven
is 49, and the difference between them is 32, which solves the puzzle
on a lateral basis. However two other pairs of numbers satisfy the
condition that their subtracted squares also equal 32. Those are six
and two or 36 -4 =32; quite irrevalent here as such a pairing scheme
would never work to solve the puzzle, thus it is obvious.
> Clue 2: 33 shows the method of the code on a different dimension.
The method of the code works both on a horizontal and vertical basis
as dual additions of sums from the outside edge inwards. On the
bottom half of the chart the the vertical sums add to 33. That is
part of the vertical code, but the horizontal is easier to follow as
a continuous rule. Every move after 32 will be matched to an outwards
formed sum adding to seven squared or 49. Those movements will be
exhausted when the pairings of numbers can no longer add to 49, but
must instead add to 81. The pairings in each case go up on one side
and down on the other, thus the pattern of future moves based on the
correct past moves as a following movement should be easily seen.
> About 25 wrong moves can be made from this halfway point, and I
> imagine any of would not work to solve the puzzle; thus it is those
will lead to the end of the maze, except one of
> them will, but then all the rows and columns would not add to the
> same number.
With correct pairings they do. WHAT A GREAT THING IT WOULD BE IF
PEOPLE WERE LIKE THAT AND WE ONLY NEEDED TO BE PAIRED WITH OUR ANGEL
OR SOUL MATE?
Estimated 450 RPM of Copper Magnetic Motor
Around 1992 I began my scientific pursuits, and made past records here
at teslafy years later. My first major project was a redirection of
the Newman motor idea, shown above. This research showed that a
rermarkable principle is inherent, but perhaps not that practical. A
central magnet can be continually rotated by a DC field that never
reverses polarity,but rather simply shuts polar coils off during that
portion of rotation.
Drawing of Norris 4 coil side/polar arrangement
In actuality I had an important assistant at this time, he calls
himself Doc, and he has returned to assist me in future inventions.
He made a good puzzle upon return which confounded me greatly. In
fact he is sort of a magician with a good mind, so the puzzle can be
submitted, but the very strange thing is resurrection of knowledge. I
had been told of this thing before by him, but failed to remember, and
even argued with him again about the issue upon his return, saying
that you are crazy, it cant be done that way, which has to do with the
puzzle. Back then before the grand ideas of possible usages of
alternating currents with these aspects, direct current was the
manipulations to be used, and a grand idea came forward which I termed
the high speed commutator, which I do not remember making of reference
of this years later here, but will quickly again describe it, and
submit the puzzle to the group.
Doc joined and another. He is helping with computer problems. Will be
back later for Docs puzzle. He made up a jpeg drawing for the
commutation piece to be described later. The could involve a
parametric capacity change in going from 32 changes in a 64 square
array to some 21 times more capacity accomplished by mechanical
commutation of switchings normally accomplished thru diodes.
having some technical computer programs here with the wireless.
Imagine a central roller in parallel rotation and contact with two
adjacent rollers rotating in opposite directions. The central roller
is actually half metallic lengthwise, and half nylon lengthwise as an
insulator, where we first built this using aluminum and nylon, and
this serves the purpose of a commutation of electricity to the outer
cylinders from the inner one to two outside branches, also composed of
half lengthwise metal and insulator. Thus the linear separation speed
between half circular electrodes itself was non-linear and meant the
voltage created by electrode separation speed in an induction arc
becomes a greater velocity during the ~second half of separation
distance, and might possibly be used as a method of "quenching" the
horrendous DC induction arcs that occur in a "60 henry" air core
inductance designed to propel large magnets via air core methods.
Newmans method involved not only commutating the polarity of the
field coils required for DC operation, but also "blinking the power on
and off" to the field coils, and then harnessing the magnetic collapse
via an intervening short segment, also accomplished on the main
commutation. This three fold commutation method instead was meant to
"alternate" power between two Newman systems, and the triple
commutation sent power to two of four coils designed as the overall
field coil configuration. But two distinct commutation systems were
needed, but this secondary system accomplished the secondary function
of "power blinking" between systems. This kind of system however could
also be used for a mechanical substitute for the diode, which is later
realized to be of possible practical value. But it uses three shafts
in counter rotation. Doc and myself built this thing, but there were
bad vibration problems from the differences in weight between nylon
and aluminum half segments.
Upon our recollections of old work upon his recent return, where
Doc is a fine artist and craftsman coming back from the Tennesee area
where I visited his family some 15? years ago, anyways the subject of
this high speed commutator design came up. We were sitting in the
local bar, and he reminded me: "Do You remember the solution I came up
with on this design? It uses two shafts instead of three and is
balanced! You asked me if I could patent it!"
"Oh bullshit Doc, it can't be done like that", I replied.
But then he started remembering; slowly at first... and came up with a
preliminary drawing, which had to be argued over again before I was
fully convinced, but I have to say it does seem both logical and quite
ingenious and simple. So how does two shafts replace three? I'll have
to leave that for awhile till I can coordinate this jpeg attachment he
69 l ft sections for a primary construction where I will first try 50
pieces in a pentagon of 10 winds, then maybe add windings later. Cost
has gone up to 2 dollars a section from 1.20 a section. Pieces arrive
Be happy with your pricing. Wait 'til you check the prices of copper
--- In email@example.com, "Harvey D Norris" <harvich@...> wrote:
> 69 l ft sections for a primary construction where I will first try 50
> pieces in a pentagon of 10 winds, then maybe add windings later. Cost
> has gone up to 2 dollars a section from 1.20 a section. Pieces arrive
> on Friday.
Went to send a graphic into files section describing two shaft
commutator part: this was sent as an attachment to me from Doc last
week but my Yahoo mail does not have this, in fact now it only holds
86 messages, and only goes back two days. So apparently this is lost.
Anyone have problems like this with Yahoo? I switched to the new
acct type, but it still does not have any info past two days back.
I use Yahoo Mail (Plus).....the only problem I have is if attachments
are too large....these sometimes get lost. I like to keep my
attachments under 2meg
--- In firstname.lastname@example.org, "Harvey D Norris" <harvich@...> wrote:
> Went to send a graphic into files section describing two shaft
> commutator part: this was sent as an attachment to me from Doc last
> week but my Yahoo mail does not have this, in fact now it only holds
> 86 messages, and only goes back two days. So apparently this is lost.
> Anyone have problems like this with Yahoo? I switched to the new
> acct type, but it still does not have any info past two days back.
Did you heard about Free Best Embroidery Design sites before!!
If you looking for Best, Good and Free Embroidery Design, you would
have to visit our web site and enjoy with a lot of best free daily
Don't wait visit now at:
We're waiting your comments
Also we have a gift for our members every Week.
Manufacturers of magnet wire do not supply an inner lead on the
winding for passing current through the entire spool. Formerly this
had to be done with an 80 lb coil rewound onto another spool; where
the specs for 23 gauge wire show this would be nine miles of wire. The
first experimentation with 60 hz source frequency resonance took place
with these huge 60 Henry Coils of ~ 1000 ohms. It gave an acting Q of
15, from a predicted 20. Two of the coils could be inversely series
resonated for simultaneously opposite voltage rises; whereby a
combined Q of 30 is obtained. During the tuning the coils can be
placed base to base so that magnetic unity increases each coils
impedance, thereby gaining a higher Q factor by the interaction of
mutual inductance. A paradox however exists regarding the fact that
when the pair of coils are INVERSELY series resonated; which is simply
one set of series LC values attached oppositely in series to the
input: this implies that even though the tuning was accomplished with
the higher reactances present in magnetic unity between the coils, the
magnetic unity of these fields should not be present after being
inversely placed in series resonances, since the effect of inversely
phased resonances is to produce opposite magnetic field orientations
between the coils. This is reffered to as the Binary Resonant
Paradox. When this was explained to Doc, he puzzled and asked "Well
what kind of polarity would then exist if the coil was in between two
equal capacities in series?" Damn good question. In any case all the
former 23 gauge coils (~ 480 lb.s) had been stolen by the criminal
DiGrino family, so upon consideration of replacement costs I find they
want about 12 dollars a lb, so each of the 6 coils will cost ~ a
thousand dollars to replace. To replace these stolen assets I have
now purchased 23 lb of 23 gauge wire on two different 6 inch OD
spools, and have seen that it seems practical to "miniaturize" the
binary resonant system without a significant loss in voltage rise.
One eighth the volume of copper can be used on smaller spools to
theoretically produce about 1/3 the voltage of the former 160 lb system.
Doc & I rewound the spools using a modified drill press set up; about
30 -40 minutes unwinding over a mile of wire. They register near 140
ohms. An AC variac test at 100 volts yielded a current of .1 A,
having an impedance of 1000 ohms, vs the former 20,000 ohms when a
larger 80 lb coil was wound. The theoretical Q factor for 60 hz is
then X(L)/R = 1000/140 = 7.14, where formerly this was 20. These
smaller coils also offer use in alternator frequency resonances. A
single phase motor to drive the alternator was also stolen; this is
being replaced also.
Sincerely Harvey D Norris
Legitimate NanoLube Creator Battles Against Copycat for Future of
In a previous issue of Gun Digest the Magazine, Associate Editor
Kevin Michalowski wrote a sidebar extolling the virtues of an
outstanding new firearms lubrication product: NanoLube.
The results of initial tests were outstanding, but controversy ensued
when it became clear the man who presented himself as the developer
of the product was apparently taking credit for work he did not
create and selling a product he did not produce.
"Chris Arnold is the developer of NanoLube and is the only person
legally allowed to be selling the product to anyone," Michalowski
said. "Court documents clearly show that Christian StClaire has been
ordered to stop selling the product and using the NanoLube name."
On Dec. 1, a preliminary injunction was ordered against Christian
StClaire of www.nanolube.com in case 2007CH1877 in DuPage County,
Ill., for multiple infringements of Arnold's products and patented
Arnold said the product StClaire is selling is apparently a diluted
form of the lubricant and does not offer the performance of Arnold's
product. Arnold provided samples of his product to Gun Digest the
Magazine, and Michalowski said the lubricity and performance of
this "pure" product far outpaces that of the product sent by StClaire.
"It's just a shame to see something you've worked your life for taken
apart by someone like this," said Arnold, who continues to pursue
legal means to stop StClaire from selling, marketing or distributing
anything resembling NanoLube.
"Right now it appears StClaire is in violation of every portion of
the court order instructing him to stop what he's doing," Arnold
said. "So we are going back to court to see what the next step is."
Further, Arnold now alleges that StClaire is apparently using the
publicity he received in gun digest the Magazine to continue selling
the product in violation of the court order.
NanoLube is available directly from Arnold at www.nanolube.net, which
is the only outlet legally authorized to sell the product. Other web
sites for the product are not authorized outlets for NanoLube.
Reprinted with permission of Gun Digest the Magazine (April 14, 2008).
Just address an email to email@example.com
Jump to a particular message