Hello all,

I had an intriguing guest on my show, The PROGRESSIVE TECHNOLOGY HOUR, by
the name of Santiago Yturria with a VNN World Exclusive report on a captured
Human-ET hybrid creature. Its like nothing I had ever seen before:
http://www.achieveradio.com/vortex-progressive-tech/index.php

Click on todays show for this intriguing interview. In regards to the owner
of the captured creature, it sounds to me the black-ops took him out with an
exotic energy beam weapon a few weeks after the capture. This is an awesome
interview!

Aurora had on a couple of intriguing guest who live in Phoenix. They can
call down UFOs and videotape these events. They presented some really
intriguing UFO videos.
http://www.achieveradio.com/vortex-healthy-habits/index.php

Michael had a local political UFO activists by the name of Jeff Peckman:
http://www.achieveradio.com/vortex-cosmic-connections/index.php

Though we had a few technical gitches here and there and a not very reliable
broadband internet connection, we have three hours of great interviews on
the archives today!

Enjoy!

Bill

---
William S. Alek, Chief Director, President
PROGRESSIVE TECH CENTER, INC.
7760 E. State Rte 69, Ste C5-381
Prescott Valley, AZ 86314
PHONE: 928.255.0198
   URL: http://progressivetechcenter.org/

Hello all,

My special guest this week on the PROGRESSIVE TECHNOLOGY HOUR is alternative
energy researcher, Tia Robinson.
http://americanfuelvehicles.com/default.aspx

Tai is the President, Chief Technology Officer and is active in all aspects
of the company. Tai designed and built the H2LawnMower™ that has been
featured on national television and helped develop the H2Go-Kart™ that has
been demonstrated at NREL (National Renewable Energy Lab). Featured in the
inaugural Drive for Life, Tai's H2VAN™ integration combined pure hydrogen
use with CNG and blends of the two. Tai was the Chief Engineer for the
H2TOY™ prototype development project which led Dennis Weavers Drive to
Survive cross-country caravan on compressed hydrogen for fuel. Tai helped
design the world famous, multi-fuel GreenHummer demonstration project and
engineer the original H2H2™ development project. His technical articles are
published on evworld.com, renewableenergyaccess.com, electrifyingtimes.com,
and the Institute of Ecolonomics newsletter.

This interview was recorded at the 2008 Tesla Tech Conference held in
Albuquerque, New Mexico.

Listen LIVE this Saturday morning starting at 10am PT, 11am Arizona time:
http://www.achieveradio.com/vortex-progressive-tech/index.php

Aurora's guest this week on VN News Hour is UFO researcher, Ed Grimsley.
This show was taped at the 2008 Tesla Tech Conference and Ed tells a really
gruesome and chilling story about his encounter with woman escaping from a
military-ET breeding program:
http://www.achieveradio.com/vortex-healthy-habits/index.php

Aurora's program starts at 9am PT, 10am Arizona time. You don't want to miss
this shocking program!

Michael will be talking about reverse speech on his show, The Cosmic
Connection:
http://www.achieveradio.com/vortex-cosmic-connections/index.php

Michael is an awesome professional channel. Trained in the Edgar Cayce
method. So, if you are in need of direction at this point in time, I suggest
giving Michael a call. He also takes calls on his show, or what he calls, "a
cosmic hors d'oeuvre."

Michael's program starts at 11am PT, 12 noon Arizona time.

And all our shows are archived...

Bill

---
William S. Alek, Chief Director, President
PROGRESSIVE TECH CENTER, INC.
7760 E. State Rte 69, Ste C5-381
Prescott Valley, AZ 86314
PHONE: 928.255.0198
   URL: http://progressivetechcenter.org/

Very Long account of Earth Battery history/ Perreault type devices which portend
conversion of radioactive energy into electrical.
http://keelytech.com/stubblefield.html
I found some of these portions amuzing...
This is an excerpt from an article about Stubblefield written by one of his
grandchildren:

o Grandpa was now once again blamed by his wife of 36 years for accidently
poisoning three of their nine children through inadvertencies. Neither, at the
time of their experimenting with various mixtures of Pitchblende and salt
crystals within their 85 farmland soil, knew it was contaminating
Teleph-on-delgreen. From 1881 to 1906, the soil-coil RF antenna "hotspots" --
that made it possible for Grandpa Nathan Stubblefield to develop and patent the
1898 induction earth batteries and 1908 Wireless Telephone™ -- did contaminate
their foodstuffs and water.

o o It wasn't until 1906 when their son Tesla died teething on a potato from one
of the RF antenna "hotspots," -- that they realized that it could have been the
RF antenna "hotspots," mixtures of Pitchblende, salt crystals and other active
metals that created the healthy looking but tainted vegetable gardens. The
watermelons, tobacco and other vegetation they had commenced growing and selling
since their courtship in 1880, when he was 20 and Ada Mae, 16 years of age
became an invitation for both invention and the destruction of a family.

o o They couldn't shake the sense of dread, so Ada Mae on their 36th
anniversary, 1917, left Grandpa Nat stranded. He moved his gear to a one room
hut and became a stranger than fiction recluse. On summer nights, he would shock
his neighbors by lighting up hill sides from his hut, with his buried RF
induction transmitting coils.

One wonders what he did to the ground, the batteries as patented could not do
this.

Hans von Lieven

Also the prisoner released from his institution to pursue the following patent;
The device is remarkable for its utter simplicity. It was invented by Roy J.
Meyers and patented in 1913. He called it an "Absorber". It has an interesting
history.

Robert A Nelson writes:

Almost 100 years ago, Meyers served a 3-1/2 year sentence in the Arizona state
prison at Florence. Before his incarceration, he had already invented an
improved trolley wheel head that prevented it from jumping off the wire. While
he was imprisoned, he was inspired to invent a device that would draw
electricity from the atmosphere. He conferred with Superintendent Sims and
Parole Clerk Sanders, and convinced them to give him the opportunity to develop
his idea in a wooden shed on the grounds of the penitentiary. Within a few
weeks, using easily available materials (chrome steel magnets and iron wire), he
constructed the first crude working model, and used it to spark the gas engines
of the prison's pump house. His second model developed 8 volts.

Miss Kate Barnard, who was State Commissioner of Charities and Corrections of
Oklahoma, was a guest of Superintendent Sims at the time, and she saw the
machine in operation. Miss Barnard was so impressed by it and by Meyers'
essential integrity (despite the lapse that had gotten him imprisoned) that she
told the story of Roy Meyers when later she appeared before the Arizona
legislature to address them concerning prison reform. The legislature and
Governor Hunt were convinced to grant Meyers an unsupervised leave of absence
for 30 days to travel to Washington DC in order to apply for a patent.

Meyers gave this account of his trip:

"When I arrived in Washington and laid my plans before the patent office
experts, they merely smiled and told me that I would have to build a model and
demonstrate my claims --- that it seemed strange that I, unknown as I am in the
electrical world, should have accomplished the things for which Edison, Tesla
and other experts have been striving for years. "They could not grasp the
meaning of my drawings nor the explanation I tried to make to them. There was
little time to spare, as I had only 20 days left of my leave, but I set to work
in a few days was able to take a crude model around to the patent office to make
a demonstration.

"Arriving at the patent office I telephoned to a friend who had been so kind as
to introduce me and aid me in reaching the proper officials. The absorber was
hoisted on two short poles and made to work. While they were as yet unable to
understand the principles involved and hardly willing to believe their eyes,
they were forced to admit that I had something new and different, and they told
me that there would be no further objection; that I might file my application
without further delay.

(Technology World Magazine, 1912)

http://www.newscientist.com/article/mg20026841.800-would-eating-heavy-atoms-leng\
then-our-lives.html?full=true

http://www.flickr.com/photos/harvich/3338764080/

Message contains attachments
image001.jpg (88KB), image002.jpg (86KB), image001.jpg (88KB), image002.jpg
(86KB)

http://us.mc328.mail.yahoo.com/mc/showMessage?fid=Inbox&sort=date&order=down&sta\
rtMid=0&.rand=507545352&da=0&midIn

--- On Mon, 3/9/09, Sue Anderson <suzieq562@...> wrote:


     From: Sue Anderson <suzieq562@...>
     Subject: Fw: Breakfast Cereal
     To: "Johnny B" <dieingbred@...>, "Jeff" <Tattozstud@...>,
Pappyabu@..., fdp123@..., "Chris & Ron" <crondi@...>,
larry319@..., ssophia@..., "Mary F" <littlemary000@...>,
RIV69MAN@..., LUSEE41@..., "Bob Cosentino" <bob.cosentino.sr@...>,
"Momma Coz" <mommacoz@...>, "Dad" <fcosentino@...>,
mlboettcher@..., mahto1@..., "Pam Crellin"
<redheadedfilly@...>, "Suzette Walker" <hotnmchili@...>, "Cathy
Stanhope" <menagerie@...>
     Date: Monday, March 9, 2009, 10:42 AM








     Subject: Fw: Breakfast Cereal
















                                 New Breakfast Cereals-----TRY THIS WITH YOUR
STIMULUS PACKAGE





                                 The problem with socialism is that you
eventually
                                    run out of other people's money.
                                   -  Margaret Thatcher










     Worried about job security? Check out the 5 safest jobs in a recession.


image001.jpg
image002.jpg
image001.jpg
image002.jpg

--- In teslafy@yahoogroups.com, "Harvey D Norris" <harvich@...> wrote:
Dont work

http://www.newscientist.com/article/mg20026841.800-would-eating-heavy-atoms-lengthen-our-lives.html?full=true

Hello all,

My special guest this week on The PROGRESSIVE TECHNOLOGY HOUR is UFO
researcher, Luke Fortune.
http://www.ufohowto.com/

Luke is a certified paralegal researcher who began aggressively
investigating the UFO phenomenon in approximately 1997. After having a clear
viewing of a plasma propulsion craft, he began researching the archives of
the US patent office, and of other countries' patent offices, to locate UFO
technology. His searches over the next ten years led to the accumulation of
all the data, and more, that has become the UFO How-To series. Each book in
this eleven volume series is over 500 pages in length, 99% of the content
are complete patents; with a recent addition of a primer volume at 118
pages, "The Basics," designed to simplify the understanding of the
encyclopedic series, and make the science of UFO propulsion systems
comprehensible to the average person. Also covered are little known power
systems for flying craft that can also be set up for home and car.

Plus, I'll be talking about my successful Galileo 2 - Boyd Bushman
Antigravity Experiment I conducted at the Creative Life Center in Sedona AZ:
http://www.sedonacreativelife.com/facilit.htm

Listen LIVE Saturday morning starting at 10am PT, 1pm ET:
http://www.achieveradio.com/vortex-progressive-tech/index.php

Brought to you by Vortex Network News.

Bill

---
William S. Alek, Chief Director, President
PROGRESSIVE TECH CENTER, INC.
7760 E. State Rte 69, Ste C5-381
Prescott Valley, AZ 86314
PHONE: 928.255.0198
   URL: http://progressivetechcenter.org/

While the years to come will feature more of these power sources, one of the most potent weapons in the green energy arsenal is actually remarkably prosaic: efficiency.

For more informations please follow This Link!

http://www.technologyreview.com/energy/22116/
I have a liquid battery of a totally different nature, but first lets hear the
liquid metal concept;
http://www.technologyreview.com/video/?vid=264
My liquid battery is a simple rainwater storage tank comprised of a 110 gallon
polyethylene holding tank. Initially this was on the ground as I showed in WAT
files back in 2002. Since then I have moved residences and now have the tank
mounted about 8 ft above ground level for gravity feed of water for garden
irrigation. Heres the old pics;

DC Voltage Measurement of Water Vortex
http://tech.groups.yahoo.com/group/teslafy/files/WAT/Dsc00253.jpg
Somewhat of a myth exists that water can be magnetised. To do this you funnel
the water down a sort of vortex water cone, which I acquired years ago as a
charity novelty, where when coins where released from a top mounted slot; they
would roll centrifigally on their edges until spinning into the center of the
vortex. Thus the shape of the cone 2/D cross section with respect to 3/D was not
a line but rather an exponential curve enabling the rolling coins entered
centrifigally at the edge to roll in wider circles around the center before
falling into the vortex cone center. This then resembled a decay of a planets
orbit into the sun. And when water is sent through the funnel, like the
macroscopic analogy the speed of the orbit increases towards the center. Thus at
the cone exit the water flow is or course not directly downwards, otherwise we
wouldn't have vortexian like water flows when we flush the toilet. Instead a
sideways deflection force to the gravity of the water fall is present, it might
be called the coriolis force in physics of motion. And when the water exits the
bottom of the funnel, it again expands to somewhat resemble the mirror image of
its former vortex motion, but we can say the water was compressed inwards by
these accelerations, and then released for free fall into gravity; but the spin
factor of its previous fluidic motion compels the fluid to again expand outwards
in fall, resembling an inverse bell shape. In this entire process of inward and
outward movement flows lateral to gravity we interpose a fairly substantial
static magnetic field shown before hands as
Cone and Magnets over Holding Tank
URL's may not be valid/ will continue descriptions....
After the water is so called magnetised by votexian flows against a magnetic
field we see a DC potential is still available from the bottom of the tank to
the top. I see the old URL's are not working, so pics of the new tank position
can be made. But what seems to be indicated is the possibility of "galvanic"
action referred to in the previous "Stubblefield Papers" The bottom of the tank
consists of a galvanized steel exit portion to attach the garden hose, and for
some mysterious reason a DC voltage will always be present between that bottom
steel portion and any top electrode touching the surface of the water. And I am
not a great believer in radiant energy schemes, but sort of like the
stubblefield observations, the voltage present on the tank is greater at night
and always greatest during a full moon. This may sound like nonscence, so it is
a good category to investigate. Last summer I made colloidal silver water in the
tank, and then added Miracle grow fertilizer which turns the water blue, The
year before I had done this with higher currents to deposit silver in the water
and it turned the water into a bluish tint into something resembling bright
green antifreeze. But in any case both the fertilizer and the silver colloidal
water process makes the water appear more conductive as an electrolyte. And the
initial voltage and current observations from the tank make it appear as a very
large innefficient battery that would not even power a LED as I recall.
     Last summer I took some meters and discharged the tank by short and after 7
minutes I was satisfied that the supply was exhausted. Then it was left open
circuit for 7 minutes, and re-measured for potential again, where it was found
that it was restored to its former state. I will re-measure that tank, still
filled with a weak electrolyte tommorow, and after sitting all winter, I wonder
if it still has a charge.
Sincerely HDN

Cone and Magnets over Holding Tank
http://tech.groups.yahoo.com/group/teslafy/files/WAT/Dsc00256.jpg

DC Voltage Measurment Of .58 volts on Filled Tank
http://tech.groups.yahoo.com/group/teslafy/files/WAT/Dsc00254.jpg

Looking for records from the past here, specifically some White Papers from
pupman.com. Found these of amuzement. My AKA is Harvey Lee Oswald! or is that
Dee? Heres the history channel view of my time distortion idea having some 250
views;
http://boards.history.com/topic/Do-You-Have/Time-Distortion-Coils/520023217
Well I cant find anything else to report on for now. Sure does look like a lot
of junk in a google of teslafy, and I cant find what I was looking for anyway...
Later HDN

This is stage one of the outside TC design magnifier project for 2009. First a
central domed tower of 20 ft is considered. A call to Portage Electronics cited
an ordering cost of $159.00/10 ft section, and $70.00 for base cemented
structure. Our dome will be a simple brass bowl picked up at flea market. My
friend Karl Ulricht today noted that small domes are always on flagpoles, and
perhaps a high pointy electrode with an antennae might excite the danger of
lightning strikes. an elevated polar capacity sounds worthwhile
HDN

--- In teslafy@yahoogroups.com, "Smoky" <smokyatgroups@...> wrote:
>
> Hi Harvey,
> May I ask some questions  about the time distortion coil experiment you were
> speaking about at the link below?
>
> I am not smartest tool in the shed sorry, apologies in advance for my
> ignorance here.
> I can conceive the relationship to the 360 degrees of a circle as the
> alternator spins and the 3 phases set up like in delta mode as a triangle...
> .generating 120 degree offset phases.
>
> When it does this though, time & consequently frequency isn't involved ( or
> is it?) as no matter how slow or fast the alternator turns... the phase
> relationship remains constant, due to mechanical geometry of alternator.
Here you are not considering that each 120 phased voltage input itself where
loaded by a series resonance as a draw in turn produces an internal voltage rise
beyond its input, which shows the acting q factor of the circuit in terms of
voltage rise to overcome the reactive impedance. For a single phase, this
voltage measurement can only be made from one of the outside supply wires and
the middle junction, or midpoint of the series LC resonant circuit. Now when
comparing two of these voltage measurements each made from separately phased
inputs as available from the automotive alternator without diodes in place, the
dual voltage measurements of two different phases are both made with each
voltage meter attached to an outside sourec connection and that of its midpoint.
BECAUSE OF THE FACT THAT EACH PHASE PRODUCED A VOLTAGE RISE ABOVE ITS INPUT, A
THIRD VOLTAGE METER CAN NOW BE PUT IN PLACE BETWEEN EACH CIRCUITS MIDPOINT
VOLTAGE RISE TO MEASURE EACH VOLTAGE RISE AGAINST EACH OTHER TO DETERMINE THE
ACTING PHASE ANGLE THAT EXISTS BETWEEN THOSE VOLTAGE RISES SPECIFICALLY. But it
assumed that the outside source voltage remains as 120 degree phasings, but we
are investigating the change that occurs afterwards, where the time distortion
effect is brought on when coils from different phases are retuned according to
their mutual induction when brought together closely in space. Now this first
method of ascertaining phase angles brought on by mutual inductance was measured
using three voltage meters, but if no voltage rise occurs on the circuits,
voltage meters cannot be used to determine the phase angle differences that
exist between the phases. For that case we must then use three amperage meters
instead. The amperage in the stator delivery line is the vector difference of
the line currents; but the vector addition case applies to the voltage rise
comparison case. From Herbert Jackson;
"Introduction to Electric Circuits" by
Herbert W Jackson, from pg 644:
"The phase current of the source is defined as the
current flowing in a particular {stator} coil of the
source of emf, and the phase current of the load is
the current flowing in a particular arm of the
load. In the wye-connected system, the source phase
current, load phase current, and line current are all
one and the same.
But careful inspection of the delta system shows
us that each line has to carry current for TWO arms of
the load. Closer inspection shows us that the
tracing direction for one of these currents is AWAY
from the source and the other is TOWARD the source.
Therefore, the line current to the delta load must be
the vector DIFFERENCE between the two load phase
currents flowing in that line."
"The line current to a balanced delta load has a
magnitude of the square root of 3, (1.7) times the
phase current in each arm of the
load and is displaced 30 degrees from the phase
current."

   So
> the 360 degrees is frequency independent.
Each individual voltage rise compared to its neighbors can sum in excess of 360
degrees.
> With the method to achieve your time expansion objective, talking about the
> series resonance of an inductor... doesn't series resonance involve LC
> ratios and consequently have steady time and frequency reactions?
>
> Having trouble relating the degrees rotation of alternator without
> mentioning time, to degrees involved in creating a resonance at a perhaps
> unrelated frequency from a tuned LC circuit?
>
> Also when you say a ceramic magnet and a neon bulb "in series", I know
> ceramic magnets don't conduct
they readily conduct at hgher voltages,especially in conjunction with resonant
circuits. I think it easy to show cases where the magnet resistance equals the
neon discharge resistance ect.

  so was wondering if it meant there's an
> inductor wound on the magnet in series with the neon load?
this is also done but not yet pictured
>
> Thanks Gerry
>
> -------Original Message-------
>
> From: Harvey D Norris
> Date: 03/17/09 14:05:11
> To: teslafy@yahoogroups.com
> Subject: [teslafy] Google of Teslafy
>
> Looking for records from the past here, specifically some White Papers from
> pupman.com. Found these of amuzement. My AKA is Harvey Lee Oswald! or is
> that Dee? Heres the history channel view of my time distortion idea having
> some 250 views;
> http://boards.history.com/topic/Do-You-Have/Time-Distortion-Coils/520023217
> Well I cant find anything else to report on for now. Sure does look like a
> lot of junk in a google of teslafy, and I cant find what I was looking for
> anyway...
> Later HDN
>
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>

From Herbert Jackson;
> "Introduction to Electric Circuits" by
> Herbert W Jackson, from pg 644:
> "The phase current of the source is defined as the
> current flowing in a particular {stator} coil of the
> source of emf, and the phase current of the load is
> the current flowing in a particular arm of the
> load. In the wye-connected system, the source phase
> current, load phase current, and line current are all
> one and the same.
> But careful inspection of the delta system shows
> us that each line has to carry current for TWO arms of
> the load. Closer inspection shows us that the
> tracing direction for one of these currents is AWAY
> from the source and the other is TOWARD the source.
> Therefore, the line current to the delta load must be
> the vector DIFFERENCE between the two load phase
> currents flowing in that line."
> "The line current to a balanced delta load has a
> magnitude of the square root of 3, (1.7) times the
> phase current in each arm of the
> load and is displaced 30 degrees from the phase
> current."
I told Karl Ulricht that this was wrong and he readily saw what I seen. I told
him this must be a misprint or something, perhaps a later edition will correct
this error? I even posed the question on Yahoo Q&A with no answers! But for me a
great error seems glossed over! If the  phase currents are themselves 120
degrees apart in timings; how could the line current feeding both phases on one
end of the delta loads not be in between those phasings in timings, implying
that it 60 degrees out of phase and not 30 as the above reference implies.
HDN

--- In teslafy@yahoogroups.com, "Harvey D Norris" <harvich@...> wrote:
>
> This is stage one of the outside TC design magnifier project for 2009. First a
central domed tower of 20 ft is considered. A call to Portage Electronics cited
an ordering cost of $159.00/10 ft section, and $70.00 for base cemented
structure. Our dome will be a simple brass bowl picked up at flea market. My
friend Karl Ulricht today noted that small domes are always on flagpoles, and
perhaps a high pointy electrode with an antennae might excite the danger of
lightning strikes. an elevated polar capacity sounds worthwhile

Surrounding the tower will be a 64 cornered 14 gauge wire wooden structure to
hold ~44 winds of insulated 14 gauge wire approximating a 10 ft diameter coil
using 1500 ft of wire as previously constructed years ago...
http://tech.groups.yahoo.com/group/teslafy/files/ATC/DzlB145.jpg
HDN

Hello all,

My returning special guest on the PROGRESSIVE TECHNOLOGY HOUR is researcher
and author, Dr. Joseph Farrell. Joe will be discussing what happened to the
NAZI Bell after the end of WWII. Did Hitler really die in a bunker in
Berlin? What happened to the secret German atom bomb research? And much
more...
http://www.gizadeathstar.com/

Joseph P. Farrell was born in Sioux Falls, SD, and received his PhD in
Patristics 1987 from Oxford. After teaching college for 17 years, he retired
to pursue his interest in alternative science and history research.

My take on the Bell device is that it was a REAL antigrav machine based on
my latest research experiment with the Boyd Bushman Antigravity Experiment.
I'll be presenting this information at an upcoming conference during the
Memorial Day weekend.

Listen LIVE Saturday morning starting at 10am PT, 1pm ET:
http://www.achieveradio.com/vortex-progressive-tech/index.php

Listener call-in questions are welcomed!

Brought to you by Vortex Network News.

Bill

---
William S. Alek, Chief Director, President
PROGRESSIVE TECH CENTER, INC.
7760 E. State Rte 69, Ste C5-381
Prescott Valley, AZ 86314
PHONE: 928.255.0198
   URL: http://progressivetechcenter.org/

The purpose of these experiments are to increase the inductance of one
component having a lower L value by mutual inductance with another component
having a much higher L value. These consist of the 12 lb 3 inch ID 23 gauge wire
1000 ohm X(L) @ 60 hz; 2.65 H having 140 ohms resistance,(8 of these are
available for mutual inductance schemes), and also two larger 70 lb coils of 840
ohms; ~ 60 Henry. The coils to have their inductance altered are  Radio Shack
MegaCable 4 layer pancake coils @ 2.3 mh; another five layered MegaCable wire
set wound around the circumference of a 12 lb spool, and two 11 mh coils in
series set atop a conical poled 60 H coil.
      It would be somewhat laborious to describe all these experiments but as
they contain contradictory actions from one case to another, they should all be
described for future reference to look into these inconsistancies. That is when
we expect a certain result which the analogies do indicate in some circumstances
and others do not. Also in one test two smaller 90 ft/ 23 gauge spools were
arranged to be inserted volume of the 2.6 H coil core, where this geometry might
be thought to be the best arrangement for mutual inductance tests of the pair.
In fact the LCR meter should always be available as a good tool to determine
these mutual inductance factors, but as we shall see this does not always seem
to apply. For the first cited case here the twin seriesed set of Radio Shack 2
inch OD spools registers 1.88 mh. When this is inserted into the core volume of
the 3 inch ID of the 2.6 H coil attached as a loop with its 3 uf resonating C
value, the inductance reading decreases to 1.7 mh. It is also noted that this
larger 2.6 H value being powered from a variac will have its input connections
acting as a shorted loop, even though its power source is not engaged, its
normally open end connections are still shorted by the loop of its input
transformer. For this first case under study the inductance was decreased by 90%
by insertion of the smaller L value into the higher. Now these experiments do
not all rely on meter measurements, but also by real acting components. We have
already resonated the larger inductances by giving them the somewhat equal
capacitive reactances in series. But for the smaller L values to convey the wall
voltage 60 hz currents, they must be "ballasted" by a load in series with them:
and since these smaller L values contain minimal values of resistance, to note
any difference of currents the load we choose to be in series with the reactance
must be at least a fairly low resistance in comparison, and for this purpose I
have initially chosen a 200 watt incandescent bulb. This is considered a purely
resistive load, although it also contains a non-linearity of resistance
according to its heat generated by the filament, in most of these cases, the
changes in current brought upon by adding the reactive load in series is
miniscule, so this change is considered inconsequential. So here in the testing
we operate first to show the load alone current consumption, then the possible
load current reduction with reactive coil added in series with the load, and
then two more observations with the outer magnetic field of the larger L value
resonances superimposed upon the reactive incandescent ballasted low L value. On
that testing the connections to either coil are also reversed to note whether
the exterior magnetic field is either aiding or opposing the ballasted coils
currents. I will continue the first of these cases between a pancake coil
sandwiched between two of the 2.6 henry coils in the next post. Here I will
leave with a comparison of LCR readings for a 5 layer MegaCable circumference
winding around a 2.6 H coil.
      With the 2.4 H/3 uf Primary Loop open the true inductance of the
circumference winding reads .533 mh. With the primary loop closed the meter
reads .225 mh. This would seem to be a large mutual inductance! However as later
real tests will show that exterior magnetic field made possible by activating
the core 2.6 H coil around the winding delivery electrical cord to the
incandescent bulb barely influences its amperage consumption.
     What all of these tests are leading up to is a very novel concept, a high
frequency step down transformer which will also be incorporated into a resonant
electrolysis scheme. Much other work with a larger water cell has also commenced
in coordination with this effort. Yesterday electrolysis powered by air core
magnetic field was demonstrated.
Sincerely Harvey D Norris

--- In teslafy@yahoogroups.com, "Harvey D Norris" <harvich@...> wrote:
>
> --- In teslafy@yahoogroups.com, "Harvey D Norris" <harvich@> wrote:
> >
> > This is stage one of the outside TC design magnifier project for 2009. First
a central domed tower of 20 ft is considered. A call to Portage Electronics
cited an ordering cost of $159.00/10 ft section, and $70.00 for base cemented
structure. Our dome will be a simple brass bowl picked up at flea market. My
friend Karl Ulricht today noted that small domes are always on flagpoles, and
perhaps a high pointy electrode with an antennae might excite the danger of
lightning strikes. An elevated polar capacity sounds worthwhile.

Cost overides abound. Arriving for check to purchase this I found they are 200
dollar per sections/ total 660 or so with extra shippings costs for said tower.
I now find this as sort of ALBATROSS. But it is ordered so I must make the best
of this and continue the plans.

The tower itself is no more then an elevated ground. The cement structure base
is hinged for convenient erection. A house rooftop or conveinient higher
structure can be roped by pulley for erection.
> Surrounding the tower will be a 64 cornered 14 gauge wire wooden structure to
hold ~44 winds of insulated 14 gauge wire approximating a 10 ft diameter coil
using 1500 ft of wire as previously constructed years ago...
> http://tech.groups.yahoo.com/group/teslafy/files/ATC/DzlB145.jpg
> HDN
>