Yeah, I figured I could do that, I was just hoping that someone on
here would be nice enough to share their wealth of knowledge.
Unfortunately, the're feeling not so generous I guess. I'll do it the
hard way.

/NyxBass

--- In the12voltsinstallbay@y..., rmjjensen <no_reply@y...> wrote:
> I've noticed no ones reply so I figure I'd help you out a little.
I
> don't know anything about the wires you ask for but you can easily
> find them. If you trace back the wires that come from your
> headlight switch you can test them with a voltage meter for voltage
> whenever the source you are looking for is turned on. For example,
> put the high beams on and then test which wire has +12V coming from
> it, then turn them off and see if it reads 0V. If it does then
> that's the wire for your highbeams. Just make sure you have a
> reliable ground so that you don't get zero readings all the time.
> Hope this helps.