Dear all, After searching the group, seems there will be risk if overwritting the redboot without the "daughter board", so I decided to make eCos RAM...
Hi everyone interested in booting, Bob Lees and I are working on a "Serial Blaster". This is a replacement to the "Blaster" daughter board used to bring-up...
I loaded all three modules by the order slhc.o ppp_generic.o ppp_async.o then I run /usr/sbin/pppd : and I can receive some garbage characters back. So I know...
... If I understand right, you are trying to get a ppp dial-IN line to your ts7250? Have you setup your modem to autoanswer? Have you told ppp that the line is...
When I dial in to ts7250, the modem starts dialing and check ID and password, then I have error 737: loopback was detected. I reset the PC ( using window 2000)...
I am developing a shell program and it works just fine, but I always ... This is the script: echo "Shell" x=24 echo $x And here is how I am running it, and...
... The first line should start with #!/bin/sh This should answer all your questions about shell scripting (in Bash) http://www.tldp.org/LDP/abs/html/ It is...
I was working with a new program (a server) I developed. While I was configuring the network with the ifcfg-eth0 file, I deleted by accident and booted. After...
The "TS Arm Linux Developer's Manual" and "Getting started with ARM-Linux" (provided by Technologic Systems) contain detailed information about booting from...
Hello, ... Your system should still boot with or without the ifcfg-eth0 file... Regardless to restore your Jffs2 filesystem you'll want to boot to an NFS root...
After modifying the ROMRAM pkgconf to RAM pkgconf, and tracing of "Hello eCos World!" eCos App, I found that the RTC driver was not implemented in eCos in...
It looks like I will finally get the go-ahead for designing an embedded system. One of the questions we need to answer is the choice of an LCD controller....
Hello Group: We are able to create a simple C program and compile it using the ARM tool chain. The program runs fine on the target. Our next step was to debug...
... I suspect you have not got a correct root filesystem on your compact flash. The kernel tries to run the init program and it is saying it can't find it. Jim...
... The TS-7200 is using troll-ftpd-1.26 as it's ftp server. I've posted the man page in the files section... To view it run the following command groff...
Hi, I am using my ts7250 as an encrypting interface for standard modem. It works fine but: * when I boot it with the modem attached, the board hangs (at least...
Hi, I am using my TS-7250 board to communicate with external modem using my own application. It works fine, but when I restart the board with modem connected...
Hello I am interested in connecting a GPS and wireless card to the 7250; I would then use the program GPSdrive (gpsdrive.kraftvoll.at) to wirelessly send data...
If anybody is in San Francisco at the LinuxWorld expo this week, make sure you check out the Technologic Systems NetBSD toaster we designed last week at the...
... I could be wrong, but do you need gpsdrive to run on the 7250 in this configuration ? Do you not just need gpsd running on the 7250, with gpsdrive running...
... Good test for the TS-7200 web server! Gotta say, it's impressive. Nice job. -Phil...
Philip Heron
ts7000@...
Aug 11, 2005 8:32 am
1278
I realize that I am replying to my own email, however, I spent some time with Ethereal and GPSdrive. GPSdrive simply sends UDP packets to a server. I looked at...
You're right. We just did. We don't have the bandwidth for that so our web site is pretty much down right now. FWIW, we're not being limited by the TS-7200...
