When I compile the -ts8 kernel with the "standard" gcc 3.3.4, it recognizes all banks of RAM. However, when I try using my softfloat gcc 3.4 toolchain, the...
ecos/packages/hal/arm/arm9/ts7250/current/include/plf_io.h plf_io.h in redboot is responsible for creating a list of ATAG_MEM structs describing the memory...
Hi Everyone, I'm new to both linux and the TS-7200. I'm trying to create a Debian build on a SanDisk 512Mb CF. However the build always works first time and...
At this point in your process, did you 1) do a reset using the reset button? or 2) did you do a login as root, shutdown the system, then reset the system? If...
... Oops, I thought linux was transferred and executed from RAM. So I do need to unmount the CF before powering off. Therefore the CF build is not suitable for...
... Read through the TS-7200 documentation; there's a section in there about creating a RAM drive for volatile data, and mounting the CF drive read-only so...
... router ... about ... read-only ... I can't found the section you're referring to. Any chance you could direct me? Is the RAM drive used to run programs...
... Well if you can get your router to fit on the onboard flash, you can use that instead of the CF card. It boots faster, the file system it uses is...
... Alas, I can't find the document myself right now. Here's the gist of it, ... Have you thought about making the root file system CFDisk or similar and ...
... drive, ... point them ... When producing the Debian CF build is there any reason why the CF cannot be formatted to JFFS2 instead of ext2? Would a JFFS2 CF...
... Yes it can - but I think you are not understanding. You can run programs from the CFdisk when mounted as read only. By mounting readonly it cannot be...
Hello, I'm having a DNS problem with some TS7250s. I have one that works fine... meaning I can ping www.yahoo.com. I have some other units that come back...
Hi Rob, If it is the same problem I was having on a new TS-7200, the problem is the libresolv.so.2 that was missing on the /lib directory. If this file is...
Hi list, I've managed to upgrade (after a lot of trouble) the Debian filesystem distributed by TS to the latest Debian release (sarge). I don't have any place...
Adriano Winter Bess
awbess@...
Sep 8, 2005 1:41 pm
1351
... Adriano, I would be interested in the sarge image for the TS board....
Thanks Sergio that was the problem and I now see there was another thread here about this already. I was not very creative with the search strings I used when...
... Walter, I would also be interested as I tried this several times myself! The TS does not have enough memory to perform the upgrade alone. So I image you...
... I measured the throughput using the ttcp test program, and, on a 166M board (an early one), I measured aprox 90M max transmitting or receiving UDP packets ...
... OK, I'll will upload it as soon as I can. This will certainly not be until 12 september, cause I'm a student and work only part time. If more people are...
Adriano Winter Bess
awbess@...
Sep 9, 2005 4:32 pm
1358
... You can upload it to ftp://oz.embeddedarm.com login as anonymous and make sure you put it in the incoming directory. Once I see it has been uploaded I will...
This includes 20 DIOs and that is what I want to know about. How would I go about writting c++ code to access the DIOs. I'm new to C++ and perhaps I ought not...
... The I/O ports are mapped into memory area. You "open" /dev/mem, then read and write using pointers. Here's a snippet from button.c which I believe is in...
Dear all, I'm using TS7250 with onboard 128MB Nand Flash. When i'm running from nand flash, i get this kernel warning as follows: *********** Searching for...
didik@...
Sep 12, 2005 4:22 pm
1364
I'm looking for a site a where I can buy just one board. I don't really need anything brand new so long as it works. I'm only trying some stuff out. If anyone...
... Just FYI, I also ran into this problem... Actually I have *many* more "Bad eraseblocks" warnings. I've searched the internet a lot on how to fix it, but I...
Adriano Winter Bess
awbess@...
Sep 12, 2005 4:45 pm
1366
... May be it really bad block on NAND falsh. I have one TS7250 running 14 days and I never see this message. Cheers Dan...
