... If I have some device that draws too much power from USB port (for TS-7xxx board to supply), and I supply it more power with an additional power supply,...
... The TS-9441 is used only for development, if you require use of the console in a production environment may I sujest looking into the Maxim MAX-232 chip...
The Bootloaded initializes the SDRAM, it sets the timings, refresh setting etc. Redboot turns on the Virtual Memory System (MMU), caching, and buffering. The...
Hi everyone! I have a TS7250 with a homebuilt temp-sensor for the serial port. My problem is that I am unable to boot the TS-7250 while the temp-sensor is ...
Hello, Yesterday, I had a simular problem when I was experimenting with a special serial mouse (external power to the mouse and its signals) to the COM1...
Per-Olof
per-olof.astrom@...
Jan 2, 2007 11:17 am
4825
No I haven't, that's most certainly the problem. I will try it as soon as possible. Tanks! Per Öberg ... -- Per Öberg, Ph.D. Student Address: Division of...
... Yes, but -where- can I find a copy of the original redboot? I have built my own from source but I am not confident that it is working correctly. thanks, -...
... I've already bought 2 boards without switching power supply, but having the power supply included in the board would be very useful for me. Would it be...
I've been using the opencore code for some time, and getting random sudden linux reboots after data transfers, but with the fix committed on Dec. 13 I now seem...
... Thanks for the info and sorry for the late reply. In the last couple of days I've been trying to make this work, but I think I need some more help from the...
Thanks for your help now the program works how can i change time format from UTC to other formats in TS7250 ... From: Jim Jackson To: ts-7000@yahoogroups.com ...
Hello, ... The TS-7300 uses Debian Linux, you can refer to "Linux for ARM on TS-7000 User's Guide" for documentation on how to modify the network scripts. For...
Eddie, Thanks for your help...but i'm still having problems. I am now able to ping in and out of the 7300. But, the apache is still not loading. I've made...
Hellow to all,I am new in this, I need to install linux in a TS-7200, and not by where to begin. As they are the steps to install linux in ts-7200 from the...
Hello, ... They ... You'll want to make all of the changes below. The last part is removing the virtual host, more importantly commenting out SSLEnable //Eddie...
Hi Bill, ... This is a great idea. Would you share how you check for the stripped-down kernel? I've built a stripped-down kernel that fits in flash and boots...
... I am seeing the same thing on my TS-7260. I have tried various versions of redboot including one I built myself with the same results. Now that it...
Paulo, I have been working with 2.6.X kernels on my TS-7260 and I imagine some of the issues are the same. A couple of tips: 1) printk doesn't work early on...
... if ... The code I use to figure out which kernel I have and (optionally) boot a more full featured kernel is below. All my bootstrap kernels are named...
... Hi Doug -- Yes, I tried. Lennert Buytenhek knew the problem right away, and gave me some insight on the linux-cirrus ML [1]. To summarize, in Linux 2.6,...
Hi -- ... Yes, this helps! It helped me go further looking into the same memory problems. ... You can shorten this to: mem=8M@0x0 mem=8M@16M mem=8M@64M...
I'm VERY new to VHDL and verilog, but I have some hardware design experience. I could definitely benefit from a version of the opencore without the ethernet...
... See Yan Seiner's TS7000 page at http://www.seiner.com/ts7000/index.php/HomePage contact Yan yan (a) seiner.com and he'll probably allow you to upload ...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
