I just came across this, and thought I would share... http://www.blisstonia.com/eolson/notes/profile_arm.php It's an interesting approach, for sure - and sound...
... Yep that's my understanding. ... not necessarily. However you don't need to restart cron when you change /etc/crontab . It checks the file modification...
I have a 7300 purchased March 7th. I have a 2G SD in it but only 1 is recognized. Could there be an error in my shipment or is this information wrong? ... ...
Hello Do you compile with the gcc provided by TS ? is your version of gcc not to old ? I think you have to use gcc 3.3.4 (or 4.4.1, but personnally I had some...
... As a game developer who works on the 360 and PS3, I can tell you that sampling profilers such as this most certainly DO work and can be quite a valuable...
Hello, I've got a memory detection problem with the ts-7260 board. I use the 'default' kernel supplied by www.embedded.arm with the ts-10 patches. If the...
Hello, ... You may want to check the partition table to ensure there aren't multiple partitions... What does fdisk say? How are you mounting the card? How are...
Only one partition. fdisk only recogized 1 gig. I bought an SD with pre-installed OS on it from TS (invoice #34396, in case someone needs to look it up and...
Hello, ... There are known problems when compiling our 2.4 kernel with gcc version 3.4 or newer. The recommended toolchain for compiling our 2.4 kernel is ...
Hey Eddie, From your reply to: Re: [ts-7000] ts-7260, kernel detects only 8MB of memory when compiled with gcc 3.4.6 ... I'm starting to work with a TS-7300. I...
Hello, ... Technologic doesn't officially support the 2.6 kernel, although there are several users on this list who are running 2.6 kernels on TS-7xxx boards....
Hi.. Anyone can help.. I just purchased TS7300 and tried to get into Redboot command window using the key hitting which is mentioned in the mannual, but ...
... You have to read the manual very carefully. The TS-7300 boots directly off the SD card ... well, it bootstraps using the on-chip EEPROM, then boots using...
Hi All, I'm looking for the source for TSLinux's version of shutdown program. I need to modify it to bring a DIO pin high so my switch can turn itself off...
Greetings, all. The TS-7250 board I have is exhibiting some new (and not good) behaviour. When I power it up the green LED starts flashing at a high rate. From...
... window ... Hi Dave, Thanks.. There is a mannual "getting stated" comes with the TS7300 SBC. In that mannual, i found that to get into the RedBoot command ...
... ftp://ftp.embeddedarm.com/ts-arm-linux-cd/cross-toolchains/crosstool-linux-gcc-3.3.4-glibc-2.3.2-0.28rc39.tar.bz2 ... If possible can you post the details...
... version ... kernel is ... ftp://ftp.embeddedarm.com/ts-arm-linux-cd/cross-toolchains/crosstool-linux-gcc-3.3.4-glibc-2.3.2-0.28rc39.tar.bz2 ... context ......
... version ... kernel is ... ftp://ftp.embeddedarm.com/ts-arm-linux-cd/cross-toolchains/crosstool-linux-gcc-3.3.4-glibc-2.3.2-0.28rc39.tar.bz2 ... context ......
I'm trying to test the AD1871 ADC (intended for digital audio applications) with a TS-7260. The default mode for the AD1871 is to spit out data in I2S. The...
I had a similar behavior with a power source problem. What are you using to power it? Gonzalo ... behaviour. When ... time to time ... red LED ... shows no...
It's a while I'm playing with I2S, it works fine with the ts-7400 ;-) The Cirrus core ep9302 supports I2S, but (if I'm not wrong) the TS-7260 and TS-7300...
... The shutdown program calls various scripts to perform shutdown tasks. The location and contents of these scripts vary by distribution, but for TSLinux you...
Hi, I have an application that needs the DIO pins to be low when the sbc boots up. Is there a way to do this without using external hardware? Thanks, Will...
Hello, ... Could you provide some information showing the problem of only 1GB being recognized. Could you format the card with a single 2GB partition. Then ...
Hello, ... We didn't apply any patches other than those applied by the crosstool scripts. I believe that was the naming convention used when we built this...
Hello, ... There is no data available on the failure conditions, just the fact that gcc version 3.4 and newer do not compile our 2.4 kernel properly. If you're...
Hi Eddie, ... Ok, thanks. I built the Linux version of the tools last night. They didn't get built with the suffix, so I guess crosstools-0.43 (sorry, the...
