Kgdb? Wiwat Tara <ohhohe@...> wrote:i would like to do remote-debugging on TS-7200 if it is possible with some graphical tools. ... Yahoo! Groups Links ...
I have connected a TS-SER4 to my TS7250. TS-BOOTROM is telling me: Off-board serial at: COM5 COM6 COM7 COM8 How can i see this serial ports from linux? Which...
... Well, make sure you have a jumper on COM1 , IRQ2, IRQ4 and 2-IRQs....nothing else. I think there was an issue with the interrupts in the kernel...they were...
In my serial.conf file I have... # These are the standard COM1 through COM4 devices # /dev/ttyS0 uart 16550A port 0x89C003F8 irq 40 /dev/ttyS1 uart 16550A port...
... I made a mistake somewhere. I started back through my emails with technologic. There was an update to the kernel, which I don't know if you have or not and...
hi all.. i am a computer engineering student from jordan and i am intend to implement my graduation project using TS-7200. We are developing a security...
We currently trying out the "self-soldering" pass-through PC/104 connectors from Teka: www.tekais.com. They seem pretty cool. They have solder and paste on...
People, Sorry to bother you all but I cannot use a compact flash (256MB) with my TS-7200 board. And I do not know I. I ran all the commands that the TS-7200...
Hi guys, Re. the floating point problem with ep9301 based ts7200 boards. Others have recompiled their toolchains to use softfloat to get round the problem. I'd...
Hello, I have changed linux24/derivers/usb/serial/ftdi_sio.c file. How can I apply it to the kernel running on the board. Appreciate your help in advance. ...
Dear, I had an I/O error while compiling a program on the CF card of my TS-7200. The problem has gone after deleting some space and freeing enough space to...
Are you sure the CF disk wasn't just full? If you have a 256MB card then there is scarely enough space left to do very much. But if you have a 512MB (or...
I'm a relative (make that complete) embedded newbie. I've done a good bit of development on full-size PCs, so I have a passing familiarity with linux.... Now...
Although slightly off-topic as it's not a 7000 series, hopefully this is a more generic question. I would like to know if anyone can point me to information...
Well, it is not a direct answer for your question, but I've found a small microcontroller kit that's designed to control T6963C LCDs via a simple serial line. ...
Hi, ... From a very quick read it looks like this driver drives the controller via the standard 386 parallel lpt1 port. It should be relatively simple to ...
... I've been given this advice in the past, Don't use journalling file systems with flash based filestore like cfdisk - far too many writes. ... Have you...
... Jim speaks the truth here, though there are filesystems designed to work directly on flash (e.g. jff2, yaffs) which will be more friendly. A lot will...
Hello I have changed a file in source of kernel. I am going to recompile the file and kernel. For recompiling the file, I stuck !!! the path of header files...
... What version of gcc are you using, when you use the crosstool binary from the CD what errors do you see? ... I did see that the atof() function is not...
... I have been told by other developers the problem has been fixed by upgrading to a newer version of crosstools. In my limited amount of testing I did see a...
... It's an EP9301 from a TS7200 board bought in Sept last year. cross tools arm-linux/gcc-3.3.2-glibc-2.3.2 A simple program that just calculates the inverse...
Dear, which is the best way to make a web page on the TS-7xxx that lets me upload files on the board, in a directory I choose? CGI? PHP? If you have some code,...
I've written a driver for that chip but not for Linux. The documentation is good and it's a very friendly chipset to work with so writing your own driver...
I think one of the main causes of filesystem corruption stems from the large number, and frequent writing of, temporary files. Installing a tempfs filesystem...
... Hmmm, it looks like the version on the CD is gcc-3.3.4-glibc-2.3.2 it you must have compiled your own version... When I compiled your source code and...
... Eddie, many thanks for including the binary of your version of double. I transfered that to my TS7200 and it works! Great. I've downloaded from the ...
OK, this might be a dumb question.... I'm being asked to provide a backup supplier for an equivalent product to the TS-7000..... AFAIK, any embedded machine...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
