HI, I am a newbie in Linux. Downloaded cross compiler and compiled the kernel. Tried loading through tftp. Redboot> load -b 0x00218000 -h 192.168.1.3 vmlinux ...
when i use the arm-linux-gcc 3.4 compile the linux24_ts9 kernel, there are many warning message, "use of compound expressions as lvalues is deprecated" when...
Got me a new TS7400, booting from SD card (2.4.26-ts11 #3 Tue May 15 11:21:07 MST 2007 armv4l GNU/Linux). Seems that the NIC hangs after some time (e.g., NFS...
... Are you talking about the C++ source code? Or the executable binary? If you're talking source or binary }:-} use the rz command -- receive ZMODEM -- and...
Does anyone have the 7800 in hand yet? I have a possible application for a couple, but as often happens, it's a moving target. If anyone has their hands on...
Hi, I was just pondering for a bit.... I plan to build a device based on a ts-7400 with an embedded usb stick. During prototpying, I just plug that into the...
I'm considering the TS-7260 for an embedded application. My question: Do USB transfers put a drain on the CPU as every word is transferred, or are USB data...
Hi Bas - ... on ... plug ... Is ... the ... absent). ... did ... bit ... One set of USB traces is brought out to the 26-pin connector, on pins 20,22,24 and 26....
Hi Bas -- ... I don't think it will change the TS official stance (IMO). But there are already community patches available to run modern kernels on TS boards...
Hello, ... Once the TS-7800 is shipping Technologic Systems will add support for the 2.6 kernel on all TS-7xxx products. ... We have written a 2.6 block driver...
For those who are interested in our new TS-PLC product, I've put up a few pages to give you an idea of what the software looks like for this product: ...
Hi Eddie - ... kernels ... for ... Great news! Thanks Eddie. ... no ... to ... TS ... to be ... anyone is ... More great news! (Well, good news anyway, given...
... If you can wait a few months, a free SDIO stack will be going into the mainline linux in 2.6.24. If you can't wait :) your can merge it from the...
I have a question on the manual for the TS7300. On page 37 in the "DIO1 Header Pin Configuration" table, it shows ADC4 connected to pin 8. But on page 38, it...
... When in doubt, check the schematic :) p5 shows ADC4 connected to pin 8 on DIO1. p1 shows that ADC4 is pin 131 on the processor. So the first comment is...
... Ah, yes, I remember that now that you mention it. That would be a good way to do it. Only one port though. Thinking out loud: it would be nice to get a usb...
... What's that line from "The Princess Bride"? Something like: "You keep using thet word 'economical'. I don' think 'et mean what you think 'et mean". --Jeff...
... Hi, ... Have you tried to build your own 2.6 kernel for TS-7400 ? I think it's almost same as other TS-72xx boards which runs 2.6 for a long time, so it...
Petr Stetiar
ynezz@...
Sep 7, 2007 1:07 am
8240
... I'm getting some JS error box 'Load error 403', when trying to load this page. I can't find any info about used technology in documentation, like used ...
Petr Stetiar
ynezz@...
Sep 7, 2007 1:12 am
8241
Hi Ynezz could you give your 2.6 kernel online ? -laks ... From: Petr Stetiar To: ts-7000@yahoogroups.com Sent: Thursday, September 06, 2007 1:22 PM Subject:...
Hello All, Has anyone been able to get a TS7xxx to connect directly in ad-hoc mode to another computer? I have my 7260 wireless running now but can only get it...
Can someone point me to some docs for the EEPROM on the TS7300? I am trying to rewrite the sample ADC code to eliminate the use of PEEK/POKE. I've got...
Thanks damotclese, I will try to do what yo wrote here ... From: damotclese <frice@...> To: ts-7000@yahoogroups.com Sent: Tuesday, September 4, 2007...
... the ... Hi, and thanks for your post. I will like to install a cross-compiler in my Laptop, but I don't know how?? I'm running TS-Linux. If you know some...
... Oh dear! What browser are you using? It works well for me under Firefox (the error it throws from not having a data source doesn't stop me from editing...
