I am using Labview8.5 and when I run the program it gets stuck at the "Varient to Data" vi. Then I tried to redo the sample program but its still the same. Can...
http://ultimaserial.com/wdspectrum.html From Windaq, Highlight/Select an active channel and start a Meter for it Highlight/Select an inactive channel and start...
... To bring up meters for all channels at once using an inactive channel: Type in 1=0 in Windaq, and the first display channel will disappear Highlight/select...
The following bug in Windaq Add-on/Meter is fixed: When Alarm is enabled, a obsolete object is called, resulting a VB error If you use this add-on, please...
http://www.ultimaserial.com/whs3.html This project is based on TiePie engineering's USB-based Handyscope HS3 HS3 is a very powerful tool, but its recorded...
All you need is your PC and a microphone, and you can see a vivid picture of your voice in frequency domain! This is a great project for science fair and for...
The latest Windaq add-ons feature Advanced Event & WWB Event Navigator: Advanced Event adds audio capability to the commented event marks feature of Windaq....
The cursor in WWB will follow the time While playing back the audio comment, making it easier to manage a lengthy audio comment for the whole waveform...
Hello Normally, in my projects, I used only Channel 1. and the other channels are not used such as channel2, channel3... Now if I want to use only channel 2 or...
Per request, new charting option is added to UltimaWaterfall, uwR2Lx, which places the DC component at the bottom of the chart when scrolling right to left ...
Good Day Folks. I am using a DI 158 U 12 Bit interface to monitor the voltage and current from an array of photovoltaic panels driving a large storage...
I am sure you can write a program with Ultimaserial to sample at 1s/s, but there is no averaging, min nor max modes ... current ... with ... batteries ... ...
UltimaSpectrogram has a major face-lifting improvement It combines the power of Ultimaserial, UltimaWaterfall, XChart and FFT1024 to display spectrogram from...
Ever need to do some lengthy testing like this? Set up a signal, writing down readings from all the channels Write down a few comments about the signal Write...
Due to a newly discovered bug in Dataq's DATAQFileII control, Windaq add-on Advanced Events and WWBEventNavigator will not work properly when the WDQ file was...
Hello I meet a few problems with my projects and I think its reason maybe a bug in ultimaserial component but I am not sure. My problem is that; In my projects...
If the conversion from your sensor to voltage is linear, you can do the following Find out the reading of your sensor corresponding to 10V (or the positive...
The code is integer division, AU = DI158 \ 16. I use it in my code. The $ converts values to string, which are not computable. Do all the computations and...
Any one interested in using Windaq starter kit as pulse rate counter? For example, a flow meter may generate pulses according to flow rate, say 10 pulses for 1...
... Generally if I want to measure a flow rate, speed such are RPM, or engineering unit like that I use a F to V (Frequency to Voltage) converter (such as an...
... Is there a page for Delphi (Ver 4 if around) for the DataQ 194 board ? Thanks for the reply. I have got a bit further since I posted the email but I would...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
