Jean and Dave:

Thanks for your wonderful support :) It is my pleasure to use your help to
improve wave. Keep up the good work. Please download Version 1.07. Remove
existing version first before installing this version from
http://www.iss-us.com/wavevcd

--KK

Hi KK,

I'm experiencing the same bug as David. The scroll bar behaves as
expected when using "Zoom in", "Zoom out" or "Zoom between markers"
but does not recover the true size when using "Zoom out full".

JDem

--- In wavevcd@yahoogroups.com, "Khan Kibria" <khan.kibria@g...> wrote:
> Thanks for reporting this one. Took us a little while to find, you
are right
> it was rather obscure. Version 1.06 fixed this bug.
> Please remove existing version first before installing this version from
> http://www.iss-us.com/wavevcd
>
> -KK
>
>
> ----- Original Message -----
> From: "David Chong" <davidchong@f...>
> To: <wavevcd@yahoogroups.com>
> Sent: Monday, May 16, 2005 7:36 PM
> Subject: [wavevcd] Bug Report - Wavevcd 1.05
>
>
> > This bug is rather obscure. Please use the attached .vcd and .setting
> files
> > to verify. On initial load of the VCD file, the waveform should be
fully
> > zoomed out. Using the drag box function, zoom in somewhere in the
middle
> of
> > the timescale. The waveforms show correctly but the horizontal
scroll bar
> is
> > now at the extreme left hand side of the window frame and not
somewhere in
> > the centre as one would expect. Clicking the horizontal scroll buttons
> (just
> > a single click) brings the zoomed display to the beginning of the
> timescale
> > which is incorrect. Hope you are able to reproduce the symptoms
with the
> > files I am sending you. Let me know if you need more clarifications.
> Thanks.
> >
> >
> >
> > David Chong

Hi KK,

Sorry if I seem like a constant pain in the neck. Found another issue with
Wavevcd 1.06. Using the last .vcd and .setting files I sent you previouslt,
try the following.

1. Zoom out full
2. Using drag box, zoom in somewhere in the middle of the timescale
3. Zoom out full again

You will notice that the horizontal scroll bar now appears although we are
at the fully zoomed out position. You can now drag the scroll bar and the
waveform displays beyond where simulation has stopped. Let me know if you
need me to resend the .vcd and .setting files.

Regards,
David Chong

Hey KK, you've done it again! Another bug bites the dust! Thanks.

dc

-----Original Message-----
From: Khan Kibria [mailto:khan.kibria@...]
Sent: Monday, 23 May 2005 6:51 AM
To: wavevcd@yahoogroups.com
Cc: David Chong
Subject: Re: [wavevcd] Bug Report - Wavevcd 1.05

Thanks for reporting this one. Took us a little while to find, you are right
it was rather obscure. Version 1.06 fixed this bug.
Please remove existing version first before installing this version from
http://www.iss-us.com/wavevcd

-KK


----- Original Message -----
From: "David Chong" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Monday, May 16, 2005 7:36 PM
Subject: [wavevcd] Bug Report - Wavevcd 1.05


> This bug is rather obscure. Please use the attached .vcd and .setting
files
> to verify. On initial load of the VCD file, the waveform should be fully
> zoomed out. Using the drag box function, zoom in somewhere in the middle
of
> the timescale. The waveforms show correctly but the horizontal scroll bar
is
> now at the extreme left hand side of the window frame and not somewhere in
> the centre as one would expect. Clicking the horizontal scroll buttons
(just
> a single click) brings the zoomed display to the beginning of the
timescale
> which is incorrect. Hope you are able to reproduce the symptoms with the
> files I am sending you. Let me know if you need more clarifications.
Thanks.
>
>
>
> David Chong

Thanks for reporting this one. Took us a little while to find, you are right
it was rather obscure. Version 1.06 fixed this bug.
Please remove existing version first before installing this version from
http://www.iss-us.com/wavevcd

-KK


----- Original Message -----
From: "David Chong" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Monday, May 16, 2005 7:36 PM
Subject: [wavevcd] Bug Report - Wavevcd 1.05


> This bug is rather obscure. Please use the attached .vcd and .setting
files
> to verify. On initial load of the VCD file, the waveform should be fully
> zoomed out. Using the drag box function, zoom in somewhere in the middle
of
> the timescale. The waveforms show correctly but the horizontal scroll bar
is
> now at the extreme left hand side of the window frame and not somewhere in
> the centre as one would expect. Clicking the horizontal scroll buttons
(just
> a single click) brings the zoomed display to the beginning of the
timescale
> which is incorrect. Hope you are able to reproduce the symptoms with the
> files I am sending you. Let me know if you need more clarifications.
Thanks.
>
>
>
> David Chong

This bug is rather obscure. Please use the attached .vcd and .setting files
to verify. On initial load of the VCD file, the waveform should be fully
zoomed out. Using the drag box function, zoom in somewhere in the middle of
the timescale. The waveforms show correctly but the horizontal scroll bar is
now at the extreme left hand side of the window frame and not somewhere in
the centre as one would expect. Clicking the horizontal scroll buttons (just
a single click) brings the zoomed display to the beginning of the timescale
which is incorrect. Hope you are able to reproduce the symptoms with the
files I am sending you. Let me know if you need more clarifications. Thanks.



David Chong





[Non-text portions of this message have been removed]

My pleasure! Many thanks for your support.

----- Original Message -----
From: "David Chong" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Saturday, May 14, 2005 12:35 AM
Subject: RE: [wavevcd] Version 1.05 with bug fix.


> Hey KK,
>
> Great job!!! Thanks for the quick turn around.
>
> David
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Hey KK,

Great job!!! Thanks for the quick turn around.

David

Version 1.05 is available at http://www.iss-us.com/wavevcd that fixes the
scrolling problem associated with dragbox zoom function. Please uninstall
older version before installing version 1.05.

Best regards,
KK

Many thanks, I will check this,

----- Original Message -----
From: "David Chong" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Friday, May 13, 2005 5:22 PM
Subject: RE: [wavevcd] Minor bug report in Wavecd 1.04


> OK, I've re-checked. The scroll bars only disappears after I zoom in
dragbox
> from a fully zoomed out position. From any position other than fully
zoomed
> out, the scroll bars do not disappear, but they also do not appear to
change
> in length as I would expect they should because the zoom level has
changed.
>
> David
>
> -----Original Message-----
> From: wavevcd@yahoogroups.com [mailto:wavevcd@yahoogroups.com]On Behalf
> Of Khan Kibria
> Sent: Friday, 13 May 2005 11:15 PM
> To: wavevcd@yahoogroups.com
> Subject: Re: [wavevcd] Minor bug report in Wavecd 1.04
>
>
> Does it disappear everytime you zoom in dragbox?
>
> ----- Original Message -----
> From: "davidchonghw" <davidchong@...>
> To: <wavevcd@yahoogroups.com>
> Sent: Thursday, May 12, 2005 6:42 PM
> Subject: [wavevcd] Minor bug report in Wavecd 1.04
>
>
> > After using the "Zoom in within drag box" feature, the horizontal
> > scroll bars seem to have disappeared. I am unable to scroll the
> > waveform left or right. They re-appear again after using the "Zoom in"
> > or "Zoom out" buttons. I'm sure this would be easy to fix.
> >
> > David Chong
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

OK, I've re-checked. The scroll bars only disappears after I zoom in dragbox
from a fully zoomed out position. From any position other than fully zoomed
out, the scroll bars do not disappear, but they also do not appear to change
in length as I would expect they should because the zoom level has changed.

David

-----Original Message-----
From: wavevcd@yahoogroups.com [mailto:wavevcd@yahoogroups.com]On Behalf
Of Khan Kibria
Sent: Friday, 13 May 2005 11:15 PM
To: wavevcd@yahoogroups.com
Subject: Re: [wavevcd] Minor bug report in Wavecd 1.04


Does it disappear everytime you zoom in dragbox?

----- Original Message -----
From: "davidchonghw" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Thursday, May 12, 2005 6:42 PM
Subject: [wavevcd] Minor bug report in Wavecd 1.04


> After using the "Zoom in within drag box" feature, the horizontal
> scroll bars seem to have disappeared. I am unable to scroll the
> waveform left or right. They re-appear again after using the "Zoom in"
> or "Zoom out" buttons. I'm sure this would be easy to fix.
>
> David Chong
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>



Yahoo! Groups Links

Does it disappear everytime you zoom in dragbox?

----- Original Message -----
From: "davidchonghw" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Thursday, May 12, 2005 6:42 PM
Subject: [wavevcd] Minor bug report in Wavecd 1.04


> After using the "Zoom in within drag box" feature, the horizontal
> scroll bars seem to have disappeared. I am unable to scroll the
> waveform left or right. They re-appear again after using the "Zoom in"
> or "Zoom out" buttons. I'm sure this would be easy to fix.
>
> David Chong
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

I will look into this.

----- Original Message -----
From: "davidchonghw" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Wednesday, May 11, 2005 12:20 AM
Subject: [wavevcd] Re: BUG Report - Wave 1.04


> OK, found the problem. I deleted the .settings file and the program
> did not crash after that. Is it possible for the .settings file to
> cause Wavecd to crash?
>
> David Chong
>
> --- In wavevcd@yahoogroups.com, "davidchonghw" <davidchong@f...> wrote:
> > I uninstalled the version 1.03 and installed version 1.04 using the
> > msi file. I am running Win2k at home. When I installed 1.04 in the
> > office running WinXP it worked great. Can anyone verify compatibility
> > of version 1.04 with Win2k?
> >
> > --- In wavevcd@yahoogroups.com, "Khan Kibria" <khan.kibria@g...>
> > wrote:
> > > Please retry and let me know. Win2k shouldn't create any problem.
> > Let me
> > > know if you installed using the zip file or the msi file.
> > >
> > > ----- Original Message -----
> > > From: "David Chong" <davidchong@f...>
> > > To: "Khan Kibria" <khan.kibria@g...>
> > > Sent: Tuesday, May 10, 2005 4:02 AM
> > > Subject: RE: BUG Report - Wave 1.03
> > >
> > >
> > > > Could it be because I am running Win2k? I will uninstall and
> > retry.
> > > Thanks.
> > > >
> > > > David
> > > >
> > > > -----Original Message-----
> > > > From: Khan Kibria [mailto:khan.kibria@g...]
> > > > Sent: Tuesday, 10 May 2005 4:17 PM
> > > > To: David Chong
> > > > Subject: Re: BUG Report - Wave 1.03
> > > >
> > > >
> > > > How did you install it?
> > > >
> > > > I can not reproduce the crash here.
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "David Chong" <davidchong@f...>
> > > > To: "Khan Kibria" <khan.kibria@g...>
> > > > Sent: Monday, May 09, 2005 11:40 PM
> > > > Subject: RE: BUG Report - Wave 1.03
> > > >
> > > >
> > > > > Hi KK,
> > > > >
> > > > > Sorry, my fault! I found the link. I am encountering another
> > problem now
> > > > > with 1.04. When I try to load my vcd file the program cashes. I
> > have
> > > > > attached the vcd file for your reference. Hope you can find out
> > why.
> > > > >
> > > > > Thanks,
> > > > >
> > > > > David Chong
> > > > >
> > > > > -----Original Message-----
> > > > > From: David Chong [mailto:davidchong@f...]
> > > > > Sent: Tuesday, 10 May 2005 2:31 PM
> > > > > To: Khan Kibria
> > > > > Subject: RE: BUG Report - Wave 1.03
> > > > >
> > > > >
> > > > > Hi KK,
> > > > >
> > > > > Thank you for the extremely quick fix. I followed your link but
> > was not
> > > > able
> > > > > to find any link to download the version 1.04.  What am I doing
> > wrong?
> > > > >
> > > > > David Chong
> > > > >
> > > > > -----Original Message-----
> > > > > From: Khan Kibria [mailto:khan.kibria@g...]
> > > > > Sent: Tuesday, 10 May 2005 2:04 PM
> > > > > To: David Chong
> > > > > Cc: wavevcd@yahoogroups.com
> > > > > Subject: Re: BUG Report - Wave 1.03
> > > > >
> > > > >
> > > > > Many thanks for pointing out the bug. It has been fixed. Please
> > install
> > > > > version 1.04 from http://groups.yahoo.com/group/wavevcd/. You
> > must
> > > remove
> > > > > existing version before you install version 1.04.
> > > > >
> > > > > I am glad that you find the software useful, please let your
> > fellow
> > > > > colleagues know about wave.
> > > > >
> > > > > Best regards,
> > > > > KK
> > > > >
> > > > > ----- Original Message -----
> > > > > From: David Chong
> > > > > To: info@i...
> > > > > Sent: Monday, May 09, 2005 1:18 AM
> > > > > Subject: BUG Report - Wave 1.03
> > > > >
> > > > > I am extremely please with the usability of the Wave software. I
> > think
> > > > there
> > > > > is however a bug in some of the displayed values. I am attaching
> > the VCD
> > > > > file and testbench log for your reference. Referring to the
> > DataIn[15:0]
> > > > and
> > > > > DataOut[15:0] signals at the boundary of Wombat_inst -
> > > > >
> > > > > Time(ns)            DataIn               Should be
> > > > > 352                   d555                 5555
> > > > > 592                   ff23                   0123
> > > > >
> > > > > Time(ns)            DataOut            Should be
> > > > > 430                   d555                 5555
> > > > > 620                   ff23                   0123
> > > > >
> > > > > There are many other instances where DataIn and DataOut are
> > incorrect. I
> > > > > have just highlighted a couple for you.
> > > > >
> > > > > The testbench read the correct values and the same VCD file
> > displayed
> > > with
> > > > > GTKWave also showed the correct values. I hope you can resolve
> > this bug
> > > > > quickly. I really like the GUI of your software.
> > > > >
> > > > > Feel free to email me if you require further clarifications.
> > Thanks.
> > > > >
> > > > > Regards,
> > > > > David Chong
> > > > >
> > > > >
> > > >
> > > >
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

After using the "Zoom in within drag box" feature, the horizontal
scroll bars seem to have disappeared. I am unable to scroll the
waveform left or right. They re-appear again after using the "Zoom in"
or "Zoom out" buttons. I'm sure this would be easy to fix.

David Chong

OK, found the problem. I deleted the .settings file and the program
did not crash after that. Is it possible for the .settings file to
cause Wavecd to crash?

David Chong

--- In wavevcd@yahoogroups.com, "davidchonghw" <davidchong@f...> wrote:
> I uninstalled the version 1.03 and installed version 1.04 using the
> msi file. I am running Win2k at home. When I installed 1.04 in the
> office running WinXP it worked great. Can anyone verify compatibility
> of version 1.04 with Win2k?
>
> --- In wavevcd@yahoogroups.com, "Khan Kibria" <khan.kibria@g...>
> wrote:
> > Please retry and let me know. Win2k shouldn't create any problem.
> Let me
> > know if you installed using the zip file or the msi file.
> >
> > ----- Original Message -----
> > From: "David Chong" <davidchong@f...>
> > To: "Khan Kibria" <khan.kibria@g...>
> > Sent: Tuesday, May 10, 2005 4:02 AM
> > Subject: RE: BUG Report - Wave 1.03
> >
> >
> > > Could it be because I am running Win2k? I will uninstall and
> retry.
> > Thanks.
> > >
> > > David
> > >
> > > -----Original Message-----
> > > From: Khan Kibria [mailto:khan.kibria@g...]
> > > Sent: Tuesday, 10 May 2005 4:17 PM
> > > To: David Chong
> > > Subject: Re: BUG Report - Wave 1.03
> > >
> > >
> > > How did you install it?
> > >
> > > I can not reproduce the crash here.
> > >
> > >
> > > ----- Original Message -----
> > > From: "David Chong" <davidchong@f...>
> > > To: "Khan Kibria" <khan.kibria@g...>
> > > Sent: Monday, May 09, 2005 11:40 PM
> > > Subject: RE: BUG Report - Wave 1.03
> > >
> > >
> > > > Hi KK,
> > > >
> > > > Sorry, my fault! I found the link. I am encountering another
> problem now
> > > > with 1.04. When I try to load my vcd file the program cashes. I
> have
> > > > attached the vcd file for your reference. Hope you can find out
> why.
> > > >
> > > > Thanks,
> > > >
> > > > David Chong
> > > >
> > > > -----Original Message-----
> > > > From: David Chong [mailto:davidchong@f...]
> > > > Sent: Tuesday, 10 May 2005 2:31 PM
> > > > To: Khan Kibria
> > > > Subject: RE: BUG Report - Wave 1.03
> > > >
> > > >
> > > > Hi KK,
> > > >
> > > > Thank you for the extremely quick fix. I followed your link but
> was not
> > > able
> > > > to find any link to download the version 1.04.  What am I doing
> wrong?
> > > >
> > > > David Chong
> > > >
> > > > -----Original Message-----
> > > > From: Khan Kibria [mailto:khan.kibria@g...]
> > > > Sent: Tuesday, 10 May 2005 2:04 PM
> > > > To: David Chong
> > > > Cc: wavevcd@yahoogroups.com
> > > > Subject: Re: BUG Report - Wave 1.03
> > > >
> > > >
> > > > Many thanks for pointing out the bug. It has been fixed. Please
> install
> > > > version 1.04 from http://groups.yahoo.com/group/wavevcd/. You
> must
> > remove
> > > > existing version before you install version 1.04.
> > > >
> > > > I am glad that you find the software useful, please let your
> fellow
> > > > colleagues know about wave.
> > > >
> > > > Best regards,
> > > > KK
> > > >
> > > > ----- Original Message -----
> > > > From: David Chong
> > > > To: info@i...
> > > > Sent: Monday, May 09, 2005 1:18 AM
> > > > Subject: BUG Report - Wave 1.03
> > > >
> > > > I am extremely please with the usability of the Wave software. I
> think
> > > there
> > > > is however a bug in some of the displayed values. I am attaching
> the VCD
> > > > file and testbench log for your reference. Referring to the
> DataIn[15:0]
> > > and
> > > > DataOut[15:0] signals at the boundary of Wombat_inst -
> > > >
> > > > Time(ns)            DataIn               Should be
> > > > 352                   d555                 5555
> > > > 592                   ff23                   0123
> > > >
> > > > Time(ns)            DataOut            Should be
> > > > 430                   d555                 5555
> > > > 620                   ff23                   0123
> > > >
> > > > There are many other instances where DataIn and DataOut are
> incorrect. I
> > > > have just highlighted a couple for you.
> > > >
> > > > The testbench read the correct values and the same VCD file
> displayed
> > with
> > > > GTKWave also showed the correct values. I hope you can resolve
> this bug
> > > > quickly. I really like the GUI of your software.
> > > >
> > > > Feel free to email me if you require further clarifications.
> Thanks.
> > > >
> > > > Regards,
> > > > David Chong
> > > >
> > > >
> > >
> > >

I uninstalled the version 1.03 and installed version 1.04 using the
msi file. I am running Win2k at home. When I installed 1.04 in the
office running WinXP it worked great. Can anyone verify compatibility
of version 1.04 with Win2k?

--- In wavevcd@yahoogroups.com, "Khan Kibria" <khan.kibria@g...>
wrote:
> Please retry and let me know. Win2k shouldn't create any problem.
Let me
> know if you installed using the zip file or the msi file.
>
> ----- Original Message -----
> From: "David Chong" <davidchong@f...>
> To: "Khan Kibria" <khan.kibria@g...>
> Sent: Tuesday, May 10, 2005 4:02 AM
> Subject: RE: BUG Report - Wave 1.03
>
>
> > Could it be because I am running Win2k? I will uninstall and
retry.
> Thanks.
> >
> > David
> >
> > -----Original Message-----
> > From: Khan Kibria [mailto:khan.kibria@g...]
> > Sent: Tuesday, 10 May 2005 4:17 PM
> > To: David Chong
> > Subject: Re: BUG Report - Wave 1.03
> >
> >
> > How did you install it?
> >
> > I can not reproduce the crash here.
> >
> >
> > ----- Original Message -----
> > From: "David Chong" <davidchong@f...>
> > To: "Khan Kibria" <khan.kibria@g...>
> > Sent: Monday, May 09, 2005 11:40 PM
> > Subject: RE: BUG Report - Wave 1.03
> >
> >
> > > Hi KK,
> > >
> > > Sorry, my fault! I found the link. I am encountering another
problem now
> > > with 1.04. When I try to load my vcd file the program cashes. I
have
> > > attached the vcd file for your reference. Hope you can find out
why.
> > >
> > > Thanks,
> > >
> > > David Chong
> > >
> > > -----Original Message-----
> > > From: David Chong [mailto:davidchong@f...]
> > > Sent: Tuesday, 10 May 2005 2:31 PM
> > > To: Khan Kibria
> > > Subject: RE: BUG Report - Wave 1.03
> > >
> > >
> > > Hi KK,
> > >
> > > Thank you for the extremely quick fix. I followed your link but
was not
> > able
> > > to find any link to download the version 1.04.  What am I doing
wrong?
> > >
> > > David Chong
> > >
> > > -----Original Message-----
> > > From: Khan Kibria [mailto:khan.kibria@g...]
> > > Sent: Tuesday, 10 May 2005 2:04 PM
> > > To: David Chong
> > > Cc: wavevcd@yahoogroups.com
> > > Subject: Re: BUG Report - Wave 1.03
> > >
> > >
> > > Many thanks for pointing out the bug. It has been fixed. Please
install
> > > version 1.04 from http://groups.yahoo.com/group/wavevcd/. You
must
> remove
> > > existing version before you install version 1.04.
> > >
> > > I am glad that you find the software useful, please let your
fellow
> > > colleagues know about wave.
> > >
> > > Best regards,
> > > KK
> > >
> > > ----- Original Message -----
> > > From: David Chong
> > > To: info@i...
> > > Sent: Monday, May 09, 2005 1:18 AM
> > > Subject: BUG Report - Wave 1.03
> > >
> > > I am extremely please with the usability of the Wave software. I
think
> > there
> > > is however a bug in some of the displayed values. I am attaching
the VCD
> > > file and testbench log for your reference. Referring to the
DataIn[15:0]
> > and
> > > DataOut[15:0] signals at the boundary of Wombat_inst -
> > >
> > > Time(ns)            DataIn               Should be
> > > 352                   d555                 5555
> > > 592                   ff23                   0123
> > >
> > > Time(ns)            DataOut            Should be
> > > 430                   d555                 5555
> > > 620                   ff23                   0123
> > >
> > > There are many other instances where DataIn and DataOut are
incorrect. I
> > > have just highlighted a couple for you.
> > >
> > > The testbench read the correct values and the same VCD file
displayed
> with
> > > GTKWave also showed the correct values. I hope you can resolve
this bug
> > > quickly. I really like the GUI of your software.
> > >
> > > Feel free to email me if you require further clarifications.
Thanks.
> > >
> > > Regards,
> > > David Chong
> > >
> > >
> >
> >

Please retry and let me know. Win2k shouldn't create any problem. Let me
know if you installed using the zip file or the msi file.

----- Original Message -----
From: "David Chong" <davidchong@...>
To: "Khan Kibria" <khan.kibria@...>
Sent: Tuesday, May 10, 2005 4:02 AM
Subject: RE: BUG Report - Wave 1.03


> Could it be because I am running Win2k? I will uninstall and retry.
Thanks.
>
> David
>
> -----Original Message-----
> From: Khan Kibria [mailto:khan.kibria@...]
> Sent: Tuesday, 10 May 2005 4:17 PM
> To: David Chong
> Subject: Re: BUG Report - Wave 1.03
>
>
> How did you install it?
>
> I can not reproduce the crash here.
>
>
> ----- Original Message -----
> From: "David Chong" <davidchong@...>
> To: "Khan Kibria" <khan.kibria@...>
> Sent: Monday, May 09, 2005 11:40 PM
> Subject: RE: BUG Report - Wave 1.03
>
>
> > Hi KK,
> >
> > Sorry, my fault! I found the link. I am encountering another problem now
> > with 1.04. When I try to load my vcd file the program cashes. I have
> > attached the vcd file for your reference. Hope you can find out why.
> >
> > Thanks,
> >
> > David Chong
> >
> > -----Original Message-----
> > From: David Chong [mailto:davidchong@...]
> > Sent: Tuesday, 10 May 2005 2:31 PM
> > To: Khan Kibria
> > Subject: RE: BUG Report - Wave 1.03
> >
> >
> > Hi KK,
> >
> > Thank you for the extremely quick fix. I followed your link but was not
> able
> > to find any link to download the version 1.04.  What am I doing wrong?
> >
> > David Chong
> >
> > -----Original Message-----
> > From: Khan Kibria [mailto:khan.kibria@...]
> > Sent: Tuesday, 10 May 2005 2:04 PM
> > To: David Chong
> > Cc: wavevcd@yahoogroups.com
> > Subject: Re: BUG Report - Wave 1.03
> >
> >
> > Many thanks for pointing out the bug. It has been fixed. Please install
> > version 1.04 from http://groups.yahoo.com/group/wavevcd/. You must
remove
> > existing version before you install version 1.04.
> >
> > I am glad that you find the software useful, please let your fellow
> > colleagues know about wave.
> >
> > Best regards,
> > KK
> >
> > ----- Original Message -----
> > From: David Chong
> > To: info@...
> > Sent: Monday, May 09, 2005 1:18 AM
> > Subject: BUG Report - Wave 1.03
> >
> > I am extremely please with the usability of the Wave software. I think
> there
> > is however a bug in some of the displayed values. I am attaching the VCD
> > file and testbench log for your reference. Referring to the DataIn[15:0]
> and
> > DataOut[15:0] signals at the boundary of Wombat_inst -
> >
> > Time(ns)            DataIn               Should be
> > 352                   d555                 5555
> > 592                   ff23                   0123
> >
> > Time(ns)            DataOut            Should be
> > 430                   d555                 5555
> > 620                   ff23                   0123
> >
> > There are many other instances where DataIn and DataOut are incorrect. I
> > have just highlighted a couple for you.
> >
> > The testbench read the correct values and the same VCD file displayed
with
> > GTKWave also showed the correct values. I hope you can resolve this bug
> > quickly. I really like the GUI of your software.
> >
> > Feel free to email me if you require further clarifications. Thanks.
> >
> > Regards,
> > David Chong
> >
> >
>
>

Good suggestion, I will include states in next release.

----- Original Message -----
From: "Jean DEMARTINI" <jean.demartini@...>
To: <wavevcd@yahoogroups.com>
Sent: Tuesday, May 10, 2005 12:22 AM
Subject: [wavevcd] Introduction of s-value


> Hello all,
>
> When modelling FSM (Finite StatesMachines) it is very comfortable to
> denoted the different states by symbols when testing a very high level
> behavioural model.
>
> GTKwave has introduce the string type (s,S prefix) to display symbols
> as strings, being free for a long time, GTKwave is used by many
> educational institutions and numerous models using symbols have been
> developped.
>
> Then I suggest that Wave VCD introduce the possibility to use and
> display s-values.
>
> In the VCD file s-values are introduced by:
>
> ...
> sHello &
> ...
>
> s<string without space><space><signal ASCII character name><nl>
>
>
> This proposal is discutable because s-value are not specified in the
> IEEE std (as far as I know).
>
> JDem
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

my mistake the link is http://www.iss-us.com/wavevcd/

----- Original Message -----
From: "Jean DEMARTINI" <jean.demartini@...>
To: <wavevcd@yahoogroups.com>
Sent: Tuesday, May 10, 2005 12:07 AM
Subject: [wavevcd] Re: BUG Report - Wave 1.03


> Hello Khan,
>
> I'm considered as a Group Member (I've logged in and as long I can
> trust the menu in top of the page) but I can only access to the
> message list.
>
> How to download the version 1.04 ? I'm impatient to try it.
> Is it possible to download it from the ISS-US Web site ?
>
> Regards,
> JDem
>
> PS: the usability of WaveVCD is almost the best I've tried. Far better
> as GTKwave surely.
>
> --- In wavevcd@yahoogroups.com, "Khan Kibria" <khan.kibria@g...> wrote:
> > Many thanks for pointing out the bug. It has been fixed. Please install
> > version 1.04 from http://groups.yahoo.com/group/wavevcd/. You must
> remove
> > existing version before you install version 1.04.
> >
> > I am glad that you find the software useful, please let your fellow
> > colleagues know about wave.
> >
> > Best regards,
> > KK
> >
> > ----- Original Message -----
> > From: David Chong
> > To: info@i...
> > Sent: Monday, May 09, 2005 1:18 AM
> > Subject: BUG Report - Wave 1.03
> >
> > I am extremely please with the usability of the Wave software. I
> think there
> > is however a bug in some of the displayed values. I am attaching the VCD
> > file and testbench log for your reference. Referring to the
> DataIn[15:0] and
> > DataOut[15:0] signals at the boundary of Wombat_inst -
> >
> > Time(ns)            DataIn               Should be
> > 352                   d555                 5555
> > 592                   ff23                   0123
> >
> > Time(ns)            DataOut            Should be
> > 430                   d555                 5555
> > 620                   ff23                   0123
> >
> > There are many other instances where DataIn and DataOut are incorrect. I
> > have just highlighted a couple for you.
> >
> > The testbench read the correct values and the same VCD file
> displayed with
> > GTKWave also showed the correct values. I hope you can resolve this bug
> > quickly. I really like the GUI of your software.
> >
> > Feel free to email me if you require further clarifications. Thanks.
> >
> > Regards,
> > David Chong
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Hello all,

When modelling FSM (Finite StatesMachines) it is very comfortable to
denoted the different states by symbols when testing a very high level
behavioural model.

GTKwave has introduce the string type (s,S prefix) to display symbols
as strings, being free for a long time, GTKwave is used by many
educational institutions and numerous models using symbols have been
developped.

Then I suggest that Wave VCD introduce the possibility to use and
display s-values.

In the VCD file s-values are introduced by:

...
sHello &
...

s<string without space><space><signal ASCII character name><nl>


This proposal is discutable because s-value are not specified in the
IEEE std (as far as I know).

JDem

Hello Khan,

I'm considered as a Group Member (I've logged in and as long I can
trust the menu in top of the page) but I can only access to the
message list.

How to download the version 1.04 ? I'm impatient to try it.
Is it possible to download it from the ISS-US Web site ?

Regards,
JDem

PS: the usability of WaveVCD is almost the best I've tried. Far better
as GTKwave surely.

--- In wavevcd@yahoogroups.com, "Khan Kibria" <khan.kibria@g...> wrote:
> Many thanks for pointing out the bug. It has been fixed. Please install
> version 1.04 from http://groups.yahoo.com/group/wavevcd/. You must
remove
> existing version before you install version 1.04.
>
> I am glad that you find the software useful, please let your fellow
> colleagues know about wave.
>
> Best regards,
> KK
>
> ----- Original Message -----
> From: David Chong
> To: info@i...
> Sent: Monday, May 09, 2005 1:18 AM
> Subject: BUG Report - Wave 1.03
>
> I am extremely please with the usability of the Wave software. I
think there
> is however a bug in some of the displayed values. I am attaching the VCD
> file and testbench log for your reference. Referring to the
DataIn[15:0] and
> DataOut[15:0] signals at the boundary of Wombat_inst -
>
> Time(ns)            DataIn               Should be
> 352                   d555                 5555
> 592                   ff23                   0123
>
> Time(ns)            DataOut            Should be
> 430                   d555                 5555
> 620                   ff23                   0123
>
> There are many other instances where DataIn and DataOut are incorrect. I
> have just highlighted a couple for you.
>
> The testbench read the correct values and the same VCD file
displayed with
> GTKWave also showed the correct values. I hope you can resolve this bug
> quickly. I really like the GUI of your software.
>
> Feel free to email me if you require further clarifications. Thanks.
>
> Regards,
> David Chong

Many thanks for pointing out the bug. It has been fixed. Please install
version 1.04 from http://groups.yahoo.com/group/wavevcd/. You must remove
existing version before you install version 1.04.

I am glad that you find the software useful, please let your fellow
colleagues know about wave.

Best regards,
KK

----- Original Message -----
From: David Chong
To: info@...
Sent: Monday, May 09, 2005 1:18 AM
Subject: BUG Report - Wave 1.03

I am extremely please with the usability of the Wave software. I think there
is however a bug in some of the displayed values. I am attaching the VCD
file and testbench log for your reference. Referring to the DataIn[15:0] and
DataOut[15:0] signals at the boundary of Wombat_inst -

Time(ns)            DataIn               Should be
352                   d555                 5555
592                   ff23                   0123

Time(ns)            DataOut            Should be
430                   d555                 5555
620                   ff23                   0123

There are many other instances where DataIn and DataOut are incorrect. I
have just highlighted a couple for you.

The testbench read the correct values and the same VCD file displayed with
GTKWave also showed the correct values. I hope you can resolve this bug
quickly. I really like the GUI of your software.

Feel free to email me if you require further clarifications. Thanks.

Regards,
David Chong

Many thanks for pointing out the bug. It has been fixed. Please install
version 1.04 from http://groups.yahoo.com/group/wavevcd/. You must remove
existing version before you install version 1.04.

I am glad that you find the software useful, please let your fellow
colleagues know about wave.

Best regards,
KK

----- Original Message -----
From: David Chong
To: info@...
Sent: Monday, May 09, 2005 1:18 AM
Subject: BUG Report - Wave 1.03

I am extremely please with the usability of the Wave software. I think there
is however a bug in some of the displayed values. I am attaching the VCD
file and testbench log for your reference. Referring to the DataIn[15:0] and
DataOut[15:0] signals at the boundary of Wombat_inst -

Time(ns)            DataIn               Should be
352                   d555                 5555
592                   ff23                   0123

Time(ns)            DataOut            Should be
430                   d555                 5555
620                   ff23                   0123

There are many other instances where DataIn and DataOut are incorrect. I
have just highlighted a couple for you.

The testbench read the correct values and the same VCD file displayed with
GTKWave also showed the correct values. I hope you can resolve this bug
quickly. I really like the GUI of your software.

Feel free to email me if you require further clarifications. Thanks.

Regards,
David Chong

Many thanks, Let me know the file size of the failing VCD if you can.


----- Original Message -----
From: "Wellinger, Anthony" <anthony.wellinger@...>
To: <wavevcd@yahoogroups.com>
Sent: Saturday, April 30, 2005 7:53 AM
Subject: RE: [wavevcd] Source


> I was able to read in a smaller vcd file.  This may be a size related
> issue.  As for sending the vcd file in question, let me check and see if
> I can send.  Company stuff and all.
>
> Thanks for the reply
>
> Regards,
> Anthony Wellinger
> Sr. Digital Designer
> Analog Devices, Inc.
>
>
>
> ________________________________
>
> From: wavevcd@yahoogroups.com [mailto:wavevcd@yahoogroups.com]
> On Behalf Of Khan Kibria
> Sent: Saturday, April 30, 2005 3:05 AM
> To: wavevcd@yahoogroups.com
> Subject: Re: [wavevcd] Source
>
>
> No the source is not avaiable. However, we will be happy to take
> anyones VCD
> and use it to diagnose problems. Please send us the VCD File.
>
> ----- Original Message -----
> From: "awellinger" <anthony.wellinger@...>
> To: <wavevcd@yahoogroups.com>
> Sent: Friday, April 29, 2005 5:57 AM
> Subject: [wavevcd] Source
>
>
> > Is the source code for wavevcd available.  I find that wavevcd
> is
> > unable to read vcd files created by cadence nc_verilog.  As
> this is
> > the standard for industry.  I would like to take a shot at
> improving
> > the vcd reader in wavevcd.
> >
> > Regards,
> > Tony
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
> >
> >
>
>
>
> ________________________________
>
> Yahoo! Groups Links
>
>
> * To visit your group on the web, go to:
> http://groups.yahoo.com/group/wavevcd/
>
> * To unsubscribe from this group, send an email to:
> wavevcd-unsubscribe@yahoogroups.com
> <mailto:wavevcd-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>
> * Your use of Yahoo! Groups is subject to the Yahoo! Terms
> of Service <http://docs.yahoo.com/info/terms/> .
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

Many thanks, I will check and have this problem fixed.

----- Original Message -----
From: "speeedy2159" <loeffler@...>
To: "Khan Kibria" <khan.kibria@...>
Sent: Sunday, May 01, 2005 12:45 PM
Subject: Problems with reading VCD


>
> Hi Khan,
>
> I am having trouble, too, reading in a VCD from Cadence's VerilogXL.
> I narrowed it down to a 5-bit register in a task. Here an extract of
> the section:
>
> $scope task SFRrmw16 $end
> $var reg       5 "h   _wait [4:0] $end
>
> If I rename the "_wait" to e.g. "xwait", I don't have any problems
> anymore.
>
> Can you please check and correct this?
>
> Thank you,
> Robert
>
>
> --- In wavevcd@yahoogroups.com, "Khan Kibria" <khan.kibria@g...>
> wrote:
> > No the source is not avaiable. However, we will be happy to take
> anyones VCD
> > and use it to diagnose problems. Please send us the VCD File.
> >
> > ----- Original Message -----
> > From: "awellinger" <anthony.wellinger@a...>
> > To: <wavevcd@yahoogroups.com>
> > Sent: Friday, April 29, 2005 5:57 AM
> > Subject: [wavevcd] Source
> >
> >
> > > Is the source code for wavevcd available.  I find that wavevcd is
> > > unable to read vcd files created by cadence nc_verilog.  As this
> is
> > > the standard for industry.  I would like to take a shot at
> improving
> > > the vcd reader in wavevcd.
> > >
> > > Regards,
> > > Tony
>
>
>
>

I was able to read in a smaller vcd file.  This may be a size related
issue.  As for sending the vcd file in question, let me check and see if
I can send.  Company stuff and all.

Thanks for the reply

Regards,
Anthony Wellinger
Sr. Digital Designer
Analog Devices, Inc.



________________________________

	 From: wavevcd@yahoogroups.com [mailto:wavevcd@yahoogroups.com]
On Behalf Of Khan Kibria
	 Sent: Saturday, April 30, 2005 3:05 AM
	 To: wavevcd@yahoogroups.com
	 Subject: Re: [wavevcd] Source


	 No the source is not avaiable. However, we will be happy to take
anyones VCD
	 and use it to diagnose problems. Please send us the VCD File.

	 ----- Original Message -----
	 From: "awellinger" <anthony.wellinger@...>
	 To: <wavevcd@yahoogroups.com>
	 Sent: Friday, April 29, 2005 5:57 AM
	 Subject: [wavevcd] Source


	 > Is the source code for wavevcd available.  I find that wavevcd
is
	 > unable to read vcd files created by cadence nc_verilog.  As
this is
	 > the standard for industry.  I would like to take a shot at
improving
	 > the vcd reader in wavevcd.
	 >
	 > Regards,
	 > Tony
	 >
	 >
	 >
	 >
	 >
	 >
	 >
	 >
	 >
	 >
	 > Yahoo! Groups Links
	 >
	 >
	 >
	 >
	 >
	 >
	 >
	 >



________________________________

	 Yahoo! Groups Links


	 * To visit your group on the web, go to:
		 http://groups.yahoo.com/group/wavevcd/

	 * To unsubscribe from this group, send an email to:
		 wavevcd-unsubscribe@yahoogroups.com
<mailto:wavevcd-unsubscribe@yahoogroups.com?subject=Unsubscribe>

	 * Your use of Yahoo! Groups is subject to the Yahoo! Terms
of Service <http://docs.yahoo.com/info/terms/> .




[Non-text portions of this message have been removed]

No the source is not avaiable. However, we will be happy to take anyones VCD
and use it to diagnose problems. Please send us the VCD File.

----- Original Message -----
From: "awellinger" <anthony.wellinger@...>
To: <wavevcd@yahoogroups.com>
Sent: Friday, April 29, 2005 5:57 AM
Subject: [wavevcd] Source


> Is the source code for wavevcd available.  I find that wavevcd is
> unable to read vcd files created by cadence nc_verilog.  As this is
> the standard for industry.  I would like to take a shot at improving
> the vcd reader in wavevcd.
>
> Regards,
> Tony
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>

Is the source code for wavevcd available.  I find that wavevcd is
unable to read vcd files created by cadence nc_verilog.  As this is
the standard for industry.  I would like to take a shot at improving
the vcd reader in wavevcd.

Regards,
Tony

Hi all,

I discovered, about 2 month ago, a very nice free HDL posed upon Python.
It was design as an extension of Python and uses a very powerfull
feature: the generator.

The MyHDL module has been developped by Jan Decaluwe. It can be
downloaded at http://jandecaluwe.com/Tools/MyHDL/Overview.html.

It is the most elegant HDL I've ever seen. The power of VHDL or
Verilog with the simplicity of Python.

It deserve to be tried.

JDem

It seems I'm the 1st member of this group.

May I introduce myself:
Professor at the University of Nice (France).
Teaching computer(processor) architecture.
Using MyDHL hardware description language: a very nice free HDL based
upon Python and developped by Jan Decaluwe (a sourceforge project).
Using Wave VCD viewer to view (of course) VCD files. I modified
slightly the VCD generator of MyHDL which was previously compatible
with GTKwave and not with the true IEEE specs.

Thaks to Khan Kibria for his support.
JDem