I am running windows XP and I have 1 Gig ram and 60 GB hard disk
-Srinivas
Thanks


>From: "Khan Kibria" <khan.kibria@...>
>Reply-To: wavevcd@yahoogroups.com
>To: <wavevcd@yahoogroups.com>
>CC: <srini208@...>
>Subject: Re: [wavevcd] .settings?
>Date: Wed, 21 Dec 2005 09:59:09 -0800
>
>What version of windows you are running? how much memory and disk space do
>you have?
>
>----- Original Message -----
>From: "srini208" <srini208@...>
>To: <wavevcd@yahoogroups.com>
>Sent: Tuesday, December 20, 2005 11:17 AM
>Subject: [wavevcd] .settings?
>
>
> > Hi,
> > I am trying to collect my data in a *.vcd file. Simulink lets me do this
>,
> > it
> > has a built in block which writes the data to a .vcd file. But when I
>try
> > to
> > open it with wave vcd viewer, it complains that a .settnigs file is
> > missing
> > and it crashes. What is a .settings file and why is it necesssary?
> >
> > here is the vcd fiel output:
> >
> > $date
> > 19-Dec-2005 16:20:42
> > $end
> > $version Link for ModelSim version 1.4 $end
> > $timescale 1 ns $end
> > $scope module untitled1 $end
> > $var wire 1 ! In_1 $end
> > $upscope $end
> > $enddefinitions $end
> > #0
> > $dumpvars
> > 1!
> > $end
> > $dumpoff
> > x!
> > $end
> >
> > Thank you in advance
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>

_________________________________________________________________
FREE pop-up blocking with the new MSN Toolbar – get it now!
http://toolbar.msn.click-url.com/go/onm00200415ave/direct/01/

What version of windows you are running? how much memory and disk space do
you have?

----- Original Message -----
From: "srini208" <srini208@...>
To: <wavevcd@yahoogroups.com>
Sent: Tuesday, December 20, 2005 11:17 AM
Subject: [wavevcd] .settings?


> Hi,
> I am trying to collect my data in a *.vcd file. Simulink lets me do this ,
> it
> has a built in block which writes the data to a .vcd file. But when I try
> to
> open it with wave vcd viewer, it complains that a .settnigs file is
> missing
> and it crashes. What is a .settings file and why is it necesssary?
>
> here is the vcd fiel output:
>
> $date
> 19-Dec-2005 16:20:42
> $end
> $version Link for ModelSim version 1.4 $end
> $timescale 1 ns $end
> $scope module untitled1 $end
> $var wire 1 ! In_1 $end
> $upscope $end
> $enddefinitions $end
> #0
> $dumpvars
> 1!
> $end
> $dumpoff
> x!
> $end
>
> Thank you in advance
>
>
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Hi,
I am trying to collect my data in a *.vcd file. Simulink lets me do this , it
has a built in block which writes the data to a .vcd file. But when I try to
open it with wave vcd viewer, it complains that a .settnigs file is missing
and it crashes. What is a .settings file and why is it necesssary?

here is the vcd fiel output:

$date
19-Dec-2005 16:20:42
$end
$version Link for ModelSim version 1.4 $end
$timescale 1 ns $end
$scope module untitled1 $end
$var wire 1 ! In_1 $end
$upscope $end
$enddefinitions $end
#0
$dumpvars
  1!
$end
$dumpoff
  x!
$end

Thank you in advance

I will look into the problem. Can you send me a test VCD file?

----- Original Message -----
From: "razvanjipa" <razvanjipa@...>
To: <wavevcd@yahoogroups.com>
Sent: Friday, December 09, 2005 1:52 AM
Subject: [wavevcd] Problem with busses display


>
> I start using WaveVCD viewer (1.07 version) but I encounter a problem
> that another member previously reported (fiwapv in a mail from Jul 19,
> 2005).
> The problem is that when I use a VCD file generated with Modelsim I can
> see only the bit 0 from any bus.
>
> Since the original post is almost 5 month old I am wondering if is
> there a patch available?
>
> Regards
> Razvan Jipa
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

I start using WaveVCD viewer (1.07 version) but I encounter a problem
that another member previously reported (fiwapv in a mail from Jul 19,
2005).
The problem is that when I use a VCD file generated with Modelsim I can
see only the bit 0 from any bus.

Since the original post is almost 5 month old I am wondering if is
there a patch available?

Regards
Razvan Jipa

Can you email me the VCD file?

--KK

----- Original Message -----
From: "fiwapv" <fiwapv@...>
To: <wavevcd@yahoogroups.com>
Sent: Tuesday, July 19, 2005 1:30 AM
Subject: [wavevcd] How to let vcd viewer to display std_logic_vector


> I used the modelsim to generate the vcd file. But when I opened the
> vcd file, I could only see (0) bit of a vector signal, for example,
> there are 32 bits for the address bus, I could only see address(0).
> And so are all the other std_logic_vector signals. When I use the
> vcd2wlf to view the wlf file that was converted by the same vcd file,
> I could see all bits of a vector signal.
>
> Any idea on this? I am new to this software.
>
> Thank you.
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

We will put that in the next release.

----- Original Message -----
From: "yarri_tokyo" <yarri_tokyo@...>
To: <wavevcd@yahoogroups.com>
Sent: Wednesday, July 27, 2005 3:08 PM
Subject: [wavevcd] Enhancement request, search for address?


> Hi KK,
>
> Good work on this, it's a nice tool!
>
> We'd love to be able to search for an address and have the cursor
> position there automatically.
>
> Thanks,
> --yarri
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>

I used the modelsim to generate the vcd file. But when I opened the
vcd file, I could only see (0) bit of a vector signal, for example,
there are 32 bits for the address bus, I could only see address(0).
And so are all the other std_logic_vector signals. When I use the
vcd2wlf to view the wlf file that was converted by the same vcd file,
I could see all bits of a vector signal.

Any idea on this? I am new to this software.

Thank you.

Hi KK,

Good work on this, it's a nice tool!

We'd love to be able to search for an address and have the cursor
position there automatically.

Thanks,
--yarri

Hi

I use wavevcd on winxp sp2...

Whenever I close wavevcd after viewing some vcd file, a file .setting
appears in the same directory. No matter what I do, settings that I make
(signals positions and rest) never get restored - whenever I open same vcd
file again it opens as no .setting file would exist. Sometimes this same
.setting file causes wavevcd to crash. I know that is this file fault,
because if I delete it it opens normally.

Regards,
Joze Dedic

Some dump (if .setting file existed):

Unhandled exception at 0x0040c989 in wave.exe: 0xC0000005: Access violation
reading location 0x00000040.
First-chance exception at 0x0040c989 in wave.exe: 0xC0000005: Access
violation reading location 0x00000040.

Exception Information
Code: 0xc0000005        F1ags: 0x00000000
Record: 0x0000000000000000      Address: 0x000000000040c989
System Information
Windows NT 5.1 Build: 2600
CPU Vendor Code: 68747541 - 69746E65 - 444D4163
CPU Version: 00000680  CPU Feature Code: 0383F9FF
CPU AMD Feature Code: C1C3F9FF
Module l
wave.exe
Image Base: 0x00400000  Image Size: 0x00000000
Checksum: 0x00000000    Time Stamp: 0x42934284

-----Original Message-----
From: wavevcd@yahoogroups.com [mailto:wavevcd@yahoogroups.com] On Behalf Of
Khan Kibria
Sent: Monday, June 27, 2005 5:13 PM
To: wavevcd@yahoogroups.com
Subject: Re: [wavevcd] Wavevcd 1.07 problems

Many thanks, Tell me more about the O/S environment so that we can fix the
bug.

About improvements, I will put them in the next release.

-KK

Many thanks, Tell me more about the O/S environment so that we can fix the
bug.

About improvements, I will put them in the next release.

-KK


----- Original Message -----
From: "Joze Dedic" <joze.dedic@...>
To: <wavevcd@yahoogroups.com>
Sent: Thursday, June 23, 2005 9:58 AM
Subject: [wavevcd] Wavevcd 1.07 problems


> Hi
>
>
>
> I've been using wavevcd for quite a some time now... It is far the best
win
> waveform viewer I have found...
>
>
>
> Still, I have some problems (bugs) and suggestions:
>
> -          (bug) most of the time I reopen vcd file (file.setting exists)
> application crashes...
>
> -          (bug) even if application somehow doesn't crash, no settings
are
> remembered
>
> -          (suggestion) it would be very nice if signals positions could
be
> moved up/down for clearer representation (selected one or multiple
selection
> move)
>
> -          (this is minor importance suggestion) insertance of empty lines
> (i.e. visual separating of signal groups)
>
>
>
> Best regards,
>
>
>
> Joze Dedic
>
>
>
> ==================================
>
> PhD junior research student
>
> University of Ljubljana
>
> Faculty of Electrical Engineering
>
> Laboratory of Integrated Circuit Design
>
> joze.dedic@...
>
>
>
>
>
> [Non-text portions of this message have been removed]
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Hi

I've been using wavevcd for quite a some time now... It is far the
best win waveform viewer I have found...


Still, I have some problems (bugs) and suggestions:
- (bug) most of the time I reopen vcd file (file.setting exists)
application crashes...
- (bug) even if application somehow doesn't crash, no settings are
remembered
-  (suggestion) it would be very nice if signals positions could be
moved up/down for clearer representation (selected one or multiple
selection move)
-  (this is minor importance suggestion) insertance of empty lines
(i.e. visual separating of signal groups)


Best regards,

Joze Dedic


==================================
PhD junior research student
University of Ljubljana
Faculty of Electrical Engineering
Laboratory of Integrated Circuit Design
joze.dedic@...


ps... I'm very sorry if I somehow managed to post multiple messages,
but I was trying at first to send message only as mailing list
member to (wavevcd@yahoogroups.com)... As no success was seen, I
took an action and opened yahoo.account (although I must state this
yahoogroups service is terribly bad)

Hi



I've been using wavevcd for quite a some time now... It is far the best win
waveform viewer I have found...



Still, I have some problems (bugs) and suggestions:

-          (bug) most of the time I reopen vcd file (file.setting exists)
application crashes...

-          (bug) even if application somehow doesn't crash, no settings are
remembered

-          (suggestion) it would be very nice if signals positions could be
moved up/down for clearer representation (selected one or multiple selection
move)

-          (this is minor importance suggestion) insertance of empty lines
(i.e. visual separating of signal groups)



Best regards,



Joze Dedic



==================================

PhD junior research student

University of Ljubljana

Faculty of Electrical Engineering

Laboratory of Integrated Circuit Design

joze.dedic@...





[Non-text portions of this message have been removed]

Hi



I've been using wavevcd for quite a some time now... It is far the best win
waveform viewer I have found...



Still, I have some problems (bugs) and suggestions:

-          (bug) most of the time I reopen vcd file (file.setting exists)
application crashes...

-          (bug) even if application somehow doesn't crash, no settings are
remembered

-          (suggestion) it would be very nice if signals positions could be
moved up/down for clearer representation (selected one or multiple selection
move)

-          (this is minor importance suggestion) insertance of empty lines
(i.e. visual separating of signal groups)



Best regards,



Joze Dedic



==================================

PhD junior research student

University of Ljubljana

Faculty of Electrical Engineering

Laboratory of Integrated Circuit Design

joze.dedic@...





[Non-text portions of this message have been removed]

Hi KK,

Thanks for the fix. As long as you welcome bug reports I'll keep giving
feedback. Here's another report.

Using the last .vcd and .setting files, try the following.

1. Zoom full
2. Using drag box, zoom into section in the middle of the timescale
3. Using horizontal scroll bars, scroll to start of simulation
4. Click on signal name in the left panel, e.g. Clk

You will notice that the zoom level changes when you perform step 4 above.

Regards,
David Chong

Wonderful!!

I haven't forgotten about your request for adding the state capability in
the Wave. It has some architectural ramifications on the software, that's
why it is taking longer, please be patient.

Many thanks for your support.

----- Original Message -----
From: "Jean DEMARTINI" <jean.demartini@...>
To: <wavevcd@yahoogroups.com>
Sent: Tuesday, May 24, 2005 9:47 AM
Subject: [wavevcd] Re: Wavevcd 1.07


> Hi KK,
>
> All zooming actions seem to function properly now. Thanks for your
> fast and efficient work.
>
> On my side, I am finishing to modify the MyHDL VCD file generator so
> that it is now totally compatible with wavevcd.
>
> Cheers,
> JDem
>
> --- In wavevcd@yahoogroups.com, "Khan Kibria" <khan.kibria@g...> wrote:
> > Jean and Dave:
> >
> > Thanks for your wonderful support :) It is my pleasure to use your
> help to
> > improve wave. Keep up the good work. Please download Version 1.07.
> Remove
> > existing version first before installing this version from
> > http://www.iss-us.com/wavevcd
> >
> > --KK
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Hi KK,

All zooming actions seem to function properly now. Thanks for your
fast and efficient work.

On my side, I am finishing to modify the MyHDL VCD file generator so
that it is now totally compatible with wavevcd.

Cheers,
JDem

--- In wavevcd@yahoogroups.com, "Khan Kibria" <khan.kibria@g...> wrote:
> Jean and Dave:
>
> Thanks for your wonderful support :) It is my pleasure to use your
help to
> improve wave. Keep up the good work. Please download Version 1.07.
Remove
> existing version first before installing this version from
> http://www.iss-us.com/wavevcd
>
> --KK

Jean and Dave:

Thanks for your wonderful support :) It is my pleasure to use your help to
improve wave. Keep up the good work. Please download Version 1.07. Remove
existing version first before installing this version from
http://www.iss-us.com/wavevcd

--KK

Hi KK,

I'm experiencing the same bug as David. The scroll bar behaves as
expected when using "Zoom in", "Zoom out" or "Zoom between markers"
but does not recover the true size when using "Zoom out full".

JDem

--- In wavevcd@yahoogroups.com, "Khan Kibria" <khan.kibria@g...> wrote:
> Thanks for reporting this one. Took us a little while to find, you
are right
> it was rather obscure. Version 1.06 fixed this bug.
> Please remove existing version first before installing this version from
> http://www.iss-us.com/wavevcd
>
> -KK
>
>
> ----- Original Message -----
> From: "David Chong" <davidchong@f...>
> To: <wavevcd@yahoogroups.com>
> Sent: Monday, May 16, 2005 7:36 PM
> Subject: [wavevcd] Bug Report - Wavevcd 1.05
>
>
> > This bug is rather obscure. Please use the attached .vcd and .setting
> files
> > to verify. On initial load of the VCD file, the waveform should be
fully
> > zoomed out. Using the drag box function, zoom in somewhere in the
middle
> of
> > the timescale. The waveforms show correctly but the horizontal
scroll bar
> is
> > now at the extreme left hand side of the window frame and not
somewhere in
> > the centre as one would expect. Clicking the horizontal scroll buttons
> (just
> > a single click) brings the zoomed display to the beginning of the
> timescale
> > which is incorrect. Hope you are able to reproduce the symptoms
with the
> > files I am sending you. Let me know if you need more clarifications.
> Thanks.
> >
> >
> >
> > David Chong

Hi KK,

Sorry if I seem like a constant pain in the neck. Found another issue with
Wavevcd 1.06. Using the last .vcd and .setting files I sent you previouslt,
try the following.

1. Zoom out full
2. Using drag box, zoom in somewhere in the middle of the timescale
3. Zoom out full again

You will notice that the horizontal scroll bar now appears although we are
at the fully zoomed out position. You can now drag the scroll bar and the
waveform displays beyond where simulation has stopped. Let me know if you
need me to resend the .vcd and .setting files.

Regards,
David Chong

Hey KK, you've done it again! Another bug bites the dust! Thanks.

dc

-----Original Message-----
From: Khan Kibria [mailto:khan.kibria@...]
Sent: Monday, 23 May 2005 6:51 AM
To: wavevcd@yahoogroups.com
Cc: David Chong
Subject: Re: [wavevcd] Bug Report - Wavevcd 1.05

Thanks for reporting this one. Took us a little while to find, you are right
it was rather obscure. Version 1.06 fixed this bug.
Please remove existing version first before installing this version from
http://www.iss-us.com/wavevcd

-KK


----- Original Message -----
From: "David Chong" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Monday, May 16, 2005 7:36 PM
Subject: [wavevcd] Bug Report - Wavevcd 1.05


> This bug is rather obscure. Please use the attached .vcd and .setting
files
> to verify. On initial load of the VCD file, the waveform should be fully
> zoomed out. Using the drag box function, zoom in somewhere in the middle
of
> the timescale. The waveforms show correctly but the horizontal scroll bar
is
> now at the extreme left hand side of the window frame and not somewhere in
> the centre as one would expect. Clicking the horizontal scroll buttons
(just
> a single click) brings the zoomed display to the beginning of the
timescale
> which is incorrect. Hope you are able to reproduce the symptoms with the
> files I am sending you. Let me know if you need more clarifications.
Thanks.
>
>
>
> David Chong

Thanks for reporting this one. Took us a little while to find, you are right
it was rather obscure. Version 1.06 fixed this bug.
Please remove existing version first before installing this version from
http://www.iss-us.com/wavevcd

-KK


----- Original Message -----
From: "David Chong" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Monday, May 16, 2005 7:36 PM
Subject: [wavevcd] Bug Report - Wavevcd 1.05


> This bug is rather obscure. Please use the attached .vcd and .setting
files
> to verify. On initial load of the VCD file, the waveform should be fully
> zoomed out. Using the drag box function, zoom in somewhere in the middle
of
> the timescale. The waveforms show correctly but the horizontal scroll bar
is
> now at the extreme left hand side of the window frame and not somewhere in
> the centre as one would expect. Clicking the horizontal scroll buttons
(just
> a single click) brings the zoomed display to the beginning of the
timescale
> which is incorrect. Hope you are able to reproduce the symptoms with the
> files I am sending you. Let me know if you need more clarifications.
Thanks.
>
>
>
> David Chong

This bug is rather obscure. Please use the attached .vcd and .setting files
to verify. On initial load of the VCD file, the waveform should be fully
zoomed out. Using the drag box function, zoom in somewhere in the middle of
the timescale. The waveforms show correctly but the horizontal scroll bar is
now at the extreme left hand side of the window frame and not somewhere in
the centre as one would expect. Clicking the horizontal scroll buttons (just
a single click) brings the zoomed display to the beginning of the timescale
which is incorrect. Hope you are able to reproduce the symptoms with the
files I am sending you. Let me know if you need more clarifications. Thanks.



David Chong





[Non-text portions of this message have been removed]

My pleasure! Many thanks for your support.

----- Original Message -----
From: "David Chong" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Saturday, May 14, 2005 12:35 AM
Subject: RE: [wavevcd] Version 1.05 with bug fix.


> Hey KK,
>
> Great job!!! Thanks for the quick turn around.
>
> David
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

Hey KK,

Great job!!! Thanks for the quick turn around.

David

Version 1.05 is available at http://www.iss-us.com/wavevcd that fixes the
scrolling problem associated with dragbox zoom function. Please uninstall
older version before installing version 1.05.

Best regards,
KK

Many thanks, I will check this,

----- Original Message -----
From: "David Chong" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Friday, May 13, 2005 5:22 PM
Subject: RE: [wavevcd] Minor bug report in Wavecd 1.04


> OK, I've re-checked. The scroll bars only disappears after I zoom in
dragbox
> from a fully zoomed out position. From any position other than fully
zoomed
> out, the scroll bars do not disappear, but they also do not appear to
change
> in length as I would expect they should because the zoom level has
changed.
>
> David
>
> -----Original Message-----
> From: wavevcd@yahoogroups.com [mailto:wavevcd@yahoogroups.com]On Behalf
> Of Khan Kibria
> Sent: Friday, 13 May 2005 11:15 PM
> To: wavevcd@yahoogroups.com
> Subject: Re: [wavevcd] Minor bug report in Wavecd 1.04
>
>
> Does it disappear everytime you zoom in dragbox?
>
> ----- Original Message -----
> From: "davidchonghw" <davidchong@...>
> To: <wavevcd@yahoogroups.com>
> Sent: Thursday, May 12, 2005 6:42 PM
> Subject: [wavevcd] Minor bug report in Wavecd 1.04
>
>
> > After using the "Zoom in within drag box" feature, the horizontal
> > scroll bars seem to have disappeared. I am unable to scroll the
> > waveform left or right. They re-appear again after using the "Zoom in"
> > or "Zoom out" buttons. I'm sure this would be easy to fix.
> >
> > David Chong
> >
> >
> >
> >
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
> >
> >
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

OK, I've re-checked. The scroll bars only disappears after I zoom in dragbox
from a fully zoomed out position. From any position other than fully zoomed
out, the scroll bars do not disappear, but they also do not appear to change
in length as I would expect they should because the zoom level has changed.

David

-----Original Message-----
From: wavevcd@yahoogroups.com [mailto:wavevcd@yahoogroups.com]On Behalf
Of Khan Kibria
Sent: Friday, 13 May 2005 11:15 PM
To: wavevcd@yahoogroups.com
Subject: Re: [wavevcd] Minor bug report in Wavecd 1.04


Does it disappear everytime you zoom in dragbox?

----- Original Message -----
From: "davidchonghw" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Thursday, May 12, 2005 6:42 PM
Subject: [wavevcd] Minor bug report in Wavecd 1.04


> After using the "Zoom in within drag box" feature, the horizontal
> scroll bars seem to have disappeared. I am unable to scroll the
> waveform left or right. They re-appear again after using the "Zoom in"
> or "Zoom out" buttons. I'm sure this would be easy to fix.
>
> David Chong
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>



Yahoo! Groups Links

Does it disappear everytime you zoom in dragbox?

----- Original Message -----
From: "davidchonghw" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Thursday, May 12, 2005 6:42 PM
Subject: [wavevcd] Minor bug report in Wavecd 1.04


> After using the "Zoom in within drag box" feature, the horizontal
> scroll bars seem to have disappeared. I am unable to scroll the
> waveform left or right. They re-appear again after using the "Zoom in"
> or "Zoom out" buttons. I'm sure this would be easy to fix.
>
> David Chong
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>

I will look into this.

----- Original Message -----
From: "davidchonghw" <davidchong@...>
To: <wavevcd@yahoogroups.com>
Sent: Wednesday, May 11, 2005 12:20 AM
Subject: [wavevcd] Re: BUG Report - Wave 1.04


> OK, found the problem. I deleted the .settings file and the program
> did not crash after that. Is it possible for the .settings file to
> cause Wavecd to crash?
>
> David Chong
>
> --- In wavevcd@yahoogroups.com, "davidchonghw" <davidchong@f...> wrote:
> > I uninstalled the version 1.03 and installed version 1.04 using the
> > msi file. I am running Win2k at home. When I installed 1.04 in the
> > office running WinXP it worked great. Can anyone verify compatibility
> > of version 1.04 with Win2k?
> >
> > --- In wavevcd@yahoogroups.com, "Khan Kibria" <khan.kibria@g...>
> > wrote:
> > > Please retry and let me know. Win2k shouldn't create any problem.
> > Let me
> > > know if you installed using the zip file or the msi file.
> > >
> > > ----- Original Message -----
> > > From: "David Chong" <davidchong@f...>
> > > To: "Khan Kibria" <khan.kibria@g...>
> > > Sent: Tuesday, May 10, 2005 4:02 AM
> > > Subject: RE: BUG Report - Wave 1.03
> > >
> > >
> > > > Could it be because I am running Win2k? I will uninstall and
> > retry.
> > > Thanks.
> > > >
> > > > David
> > > >
> > > > -----Original Message-----
> > > > From: Khan Kibria [mailto:khan.kibria@g...]
> > > > Sent: Tuesday, 10 May 2005 4:17 PM
> > > > To: David Chong
> > > > Subject: Re: BUG Report - Wave 1.03
> > > >
> > > >
> > > > How did you install it?
> > > >
> > > > I can not reproduce the crash here.
> > > >
> > > >
> > > > ----- Original Message -----
> > > > From: "David Chong" <davidchong@f...>
> > > > To: "Khan Kibria" <khan.kibria@g...>
> > > > Sent: Monday, May 09, 2005 11:40 PM
> > > > Subject: RE: BUG Report - Wave 1.03
> > > >
> > > >
> > > > > Hi KK,
> > > > >
> > > > > Sorry, my fault! I found the link. I am encountering another
> > problem now
> > > > > with 1.04. When I try to load my vcd file the program cashes. I
> > have
> > > > > attached the vcd file for your reference. Hope you can find out
> > why.
> > > > >
> > > > > Thanks,
> > > > >
> > > > > David Chong
> > > > >
> > > > > -----Original Message-----
> > > > > From: David Chong [mailto:davidchong@f...]
> > > > > Sent: Tuesday, 10 May 2005 2:31 PM
> > > > > To: Khan Kibria
> > > > > Subject: RE: BUG Report - Wave 1.03
> > > > >
> > > > >
> > > > > Hi KK,
> > > > >
> > > > > Thank you for the extremely quick fix. I followed your link but
> > was not
> > > > able
> > > > > to find any link to download the version 1.04.  What am I doing
> > wrong?
> > > > >
> > > > > David Chong
> > > > >
> > > > > -----Original Message-----
> > > > > From: Khan Kibria [mailto:khan.kibria@g...]
> > > > > Sent: Tuesday, 10 May 2005 2:04 PM
> > > > > To: David Chong
> > > > > Cc: wavevcd@yahoogroups.com
> > > > > Subject: Re: BUG Report - Wave 1.03
> > > > >
> > > > >
> > > > > Many thanks for pointing out the bug. It has been fixed. Please
> > install
> > > > > version 1.04 from http://groups.yahoo.com/group/wavevcd/. You
> > must
> > > remove
> > > > > existing version before you install version 1.04.
> > > > >
> > > > > I am glad that you find the software useful, please let your
> > fellow
> > > > > colleagues know about wave.
> > > > >
> > > > > Best regards,
> > > > > KK
> > > > >
> > > > > ----- Original Message -----
> > > > > From: David Chong
> > > > > To: info@i...
> > > > > Sent: Monday, May 09, 2005 1:18 AM
> > > > > Subject: BUG Report - Wave 1.03
> > > > >
> > > > > I am extremely please with the usability of the Wave software. I
> > think
> > > > there
> > > > > is however a bug in some of the displayed values. I am attaching
> > the VCD
> > > > > file and testbench log for your reference. Referring to the
> > DataIn[15:0]
> > > > and
> > > > > DataOut[15:0] signals at the boundary of Wombat_inst -
> > > > >
> > > > > Time(ns)            DataIn               Should be
> > > > > 352                   d555                 5555
> > > > > 592                   ff23                   0123
> > > > >
> > > > > Time(ns)            DataOut            Should be
> > > > > 430                   d555                 5555
> > > > > 620                   ff23                   0123
> > > > >
> > > > > There are many other instances where DataIn and DataOut are
> > incorrect. I
> > > > > have just highlighted a couple for you.
> > > > >
> > > > > The testbench read the correct values and the same VCD file
> > displayed
> > > with
> > > > > GTKWave also showed the correct values. I hope you can resolve
> > this bug
> > > > > quickly. I really like the GUI of your software.
> > > > >
> > > > > Feel free to email me if you require further clarifications.
> > Thanks.
> > > > >
> > > > > Regards,
> > > > > David Chong
> > > > >
> > > > >
> > > >
> > > >
>
>
>
>
>
> Yahoo! Groups Links
>
>
>
>
>
>