Zack, FYI, I've done hard and soft replace using the fine mesh, and also hard breakline insert with my lines. Yes, the grids come out alright, albeit with...
When I replied, I assumed that the grid would be interpolated using VNS, rather than Spatial Analyst, and under those circumstances AFAIK, my original...
... Note that using along lens and taking the photo from farther away will reduce this abberration in the image (although it will never remove it completely) ...
... Unfortunately that's not always possible in an urban environment :) Ideally, you'd want to take the photo from a sufficiently high enough elevation so that...
... <MUNCH> Rick, As Chris H has informed me about exporting to Realtime formats (like NVE), you can get by with a coarser DEM if you drape a higher res ...
... Even more ideally, you'd want to use a view camera and apply rise to the lens to project the building image onto the imaging area of your film: ...
... Retro photography is tres' cool. BTW, did anyone see The Illusionist? Lots of work went into the "Retro" film look, and it turned out very nicely. Exciting...
... Absolutely, Hans ;) My comment should perhaps have read: "Note that using a longER lens and taking the photo from AS far away as possible" :) ... Also...
... Yes. You can manually change the bounds & coordinate system used on that page too. ... I'll see if I can find out from the author of that section (out...
... And this one is quite a bit cheaper. I've used it in the past, with great results. http://epaperpress.com/ptlens/ I used it to correct the distortion...
... I have just put an example of this here: http://www.n-light.pwp.blueyonder.co.uk Both cameras have a 50 degree FOV and exactly the same position in space. ...
... C'mon, Adam, Don't tease us! What's the real URL (I get forbidden 403 HTTP error)? BTW, please don't call it tilt-shift. tilting the lens' optical axis...
... 403 Forbidden You don't have permission to access those file(s). ... -- Chris 'Xenon' Hanson | Xenon @ 3D Nature | http://www.3DNature.com/ 3D World Maps:...
... axis so ... And something rather interesting to those not familiar with the details is the "Scheimpflug principle". The focal plane changes. Nice ...
... Aaarrrrgggghhhh! Sorry guys - link should be http://www.n-light.pwp.blueyonder.co.uk/Temp/TiltShift.jpg And I just noticed that at some point the heading...
... fraction too ... Adam is correct in using tilt/shift when referring to a _lens_ for a modern 35mm camera. That (or Nikon's 'PC' for perspective control) is...
For each of the remaining images, activate that image, do a "select all" and a "copy". ... the "Move Tool", use the ... of the existing ... wallpaper....
... Not sure what you're asking. You need to be clearer in your question. -- Chris 'Xenon' Hanson | Xenon @ 3D Nature | http://www.3DNature.com/ 3D Landscape...
... I don't think it said to select all the images. Just for each image, do a select all, which will select the contents of that image. ... After each layer is...
VNS 2.75 I"m trying to follow the tutorial for importing a DEM and then setting the elevation, and trying to import that .elev that was just created. It is not...
Congratulations to Drew Stainton for being selected as the December Artist of the Month. Nice work Drew! http://www.3dnworld.com/aotm.php -- Mindy K. Bieging,...
GeoTIFF is a pretty uncommon and troublesome format for use as a DEM. What program produced the GeoTIFF DEM? There's probably a better format to use when...
Stephanie, It's helpful to know which steps of which tutorial are giving you problems. It saves time searching to try and figure out which section you're...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
