webalizer : Messages : 1625-1654 of 3841

Messages: Show Message Summaries Sort by Date

#1625 From: Oriol Garcia <uri@...>
Date: Tue Oct 1, 2002 11:40 am
Subject: Clients and visits webalizer2002
Send Email

Dear list-members

I installed webalizer with default configuration on one server..... the
problem is that the visits are fewer than the clients.Please can you tell
me if someone had the same problem? and if anyone has the answer please
tell me :)

Thank U a lot

Regards

Reply | Messages in this Topic (3)

#1626 From: "Stephen Moretti" <stephen@...>
Date: Tue Oct 1, 2002 12:34 pm
Subject: Re: Clients and visits cfdeveloperuk
Send Email

>
> I installed webalizer with default configuration on one server..... the
> problem is that the visits are fewer than the clients.Please can you tell
> me if someone had the same problem? and if anyone has the answer please
> tell me :)
>

Clients?  What do you mean by clients?

Visits _should_ be the number of unique IP addresses accessing your site
which have spent a period of time on your server with a 20 minute (?) idle
period.

Hmmm... Ok now again in english....
A user with the ip address 10.1.1.10 visits your web site. They spend 10
minutes wandering around your site and become idle.  When they have been
idle for 20 minutes (I think this is the default in webalizer), that ends
their visit.

If that same user accesses your site after they have been idle for 20
minutes, then that consitutes a new visit.

Make sense?  Basically your visits should be pretty high....

Now then, I say _should_ because I don't think the visit counter code is
working correctly in webalizer....  I honestly don't believe that an average
6 visits will access an average 1260 page between them. That's like 210
pages each!  Now I know there is a load of information on this particular
site, but I don't really believe that the visitors will access that much
information!

I would believe an average of 20 pages per visit and 60 visitors giving an
average 1200 pages....

Just my 2p

Regards

Stephen

Reply | Messages in this Topic (3)

#1627 From: "daddy_root" <robshort@...>
Date: Tue Oct 1, 2002 12:58 pm
Subject: IIS5 showing incorrect time daddy_root
Send Email

I've noticed that the time on my computer and the time on my IIS5
logs are off by about 4 hours. i.e., if it's 7:00 AM, my log shows
11:00 AM. Any ideas on how to fix this? There don't seem to be any
configurable options for time within IIS itself.

Also - does anyone know of a good HOWTO for setting up reverse DNS
lookup within webalizer?


Regards,


Rob

Reply | Messages in this Topic (3)

#1628 From: "Gray . Brendan" <bgray2@...>
Date: Tue Oct 1, 2002 2:42 pm
Subject: RE: IIS5 showing incorrect time bgray2drc
Send Email

I don't know how to fix it, but it sounds like your IIS server is logging
the time as GMT instead of Eastern Time (US).  A few years back I was using
MS Site Server to analyze my logs, and ran into the same problem.  A temp
solution was to change the local time on the server to match GMT.  I forget
what we did as a better solution, or if we even found one.

Brendan



-----Original Message-----
From: daddy_root [mailto:robshort@...]
Sent: Tuesday, October 01, 2002 8:58 AM
To: webalizer@yahoogroups.com
Subject: [webalizer] IIS5 showing incorrect time


I've noticed that the time on my computer and the time on my IIS5
logs are off by about 4 hours. i.e., if it's 7:00 AM, my log shows
11:00 AM. Any ideas on how to fix this? There don't seem to be any
configurable options for time within IIS itself.

Also - does anyone know of a good HOWTO for setting up reverse DNS
lookup within webalizer?


Regards,


Rob

Reply | Messages in this Topic (3)

#1629 From: "jlamarca.geo" <jlamarca.geo@...>
Date: Wed Oct 2, 2002 6:01 am
Subject: Headings jlamarca.geo
Send Email

I would really like to know what the exact meanings of each statistic
refers to - I've looked all over the 'net and can't find any
specifics for such things as:

Total URLs
Total URLs By KBytes
Total Entry Pages
Exit Pages
Total Sites
Total Sites By KBytes
Total Referrers, etc.

Thanks.

Reply | Messages in this Topic (2)

#1630 From: "W. K. Mahler" <lkmwkm@...>
Date: Wed Oct 2, 2002 11:47 am
Subject: What is the difference between Extreme Tracking & Webalizer...I have both.. wlmahler
Send Email

Hello,

I use Extreme Tracking, the free tracker on 5 pages of my site, www.mahlers.com. On average I am getting visited 4 to 5 times per day according to Extreme Tracking. On the other hand, via my webhost, Hostsave.com, Webalizer has reported 50 to 110 hits per day with a total of nearly 32000 hits since the first week of July 2002. I ask you, why such a tremendous difference? What does Webalizer do regarding hits that Extreme Tracking doesn't?

Thanks,

William K. Mahler

Reply | Messages in this Topic (5)

#1631 From: "Tom Phillips" <tom@...>
Date: Wed Oct 2, 2002 11:46 am
Subject: RE: What is the difference between Extreme Tracking & Webalizer...I have both.. tomphillipspcs
Send Email

you need to look at "visits" - hits are file requests in webalizer

-----Original Message-----
From: W. K. Mahler [mailto:lkmwkm@...]
Sent: Wednesday, October 02, 2002 12:47 PM
To: Webalizer
Subject: [webalizer] What is the difference between Extreme Tracking & Webalizer...I have both..

Hello,

I use Extreme Tracking, the free tracker on 5 pages of my site, www.mahlers.com. On average I am getting visited 4 to 5 times per day according to Extreme Tracking. On the other hand, via my webhost, Hostsave.com, Webalizer has reported 50 to 110 hits per day with a total of nearly 32000 hits since the first week of July 2002. I ask you, why such a tremendous difference? What does Webalizer do regarding hits that Extreme Tracking doesn't?

Thanks,

William K. Mahler

To unsubscribe from this group, send an email to: webalizer-unsubscribe@egroups.com Webalizer homepage: http://www.webalizer.org Webalizer for NT: http://www.medasys-lille.com/webalizer/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Reply | Messages in this Topic (5)

#1632 From: "PeterBX" <peter@...>
Date: Wed Oct 2, 2002 11:55 am
Subject: Re: What is the difference between Extreme Tracking & Webalizer...I have both.. corbinb2
Send Email

William,

Webalizer is basically controlled by it's conf file. I'm not sure what Extreme hits is doing but webalizer tracks the IP address the visitor came from and keeps it on file as it were, for a specified amount of time so that if that person returns it is not recorded as a unique visitor again. I believe the default is 15 minutes but it can be adjusted via conf file to be whatever you or they want in this case.

I am not sure what to tell you as far as the discrepancy in the two goes, but many stats places deal with raw hits without sorting out how many actual unique visits you are getting. This may explain the difference you are seeing. Hits and Visits are two separate things.

Many hit trackers programs do not differentiate either between image files, script files, html files, etc, and count each file accessed as a hit.

These are just a few ideas of mine but if anyone else has any direct insight into this Extreme Hits program, feel free to speak up....lol

Hope this helps,

CorbinB2

----- Original Message -----

From: W. K. Mahler

To: Webalizer

Sent: Wednesday, October 02, 2002 5:47 AM

Subject: [webalizer] What is the difference between Extreme Tracking & Webalizer...I have both..

Hello,

William K. Mahler

To unsubscribe from this group, send an email to: webalizer-unsubscribe@egroups.com Webalizer homepage: http://www.webalizer.org Webalizer for NT: http://www.medasys-lille.com/webalizer/

Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Reply | Messages in this Topic (5)

#1633 From: "W. K. Mahler" <lkmwkm@...>
Date: Wed Oct 2, 2002 2:09 pm
Subject: Extreme Tracking & Webalizer..What Are The Differences? wlmahler
Send Email

Hello,

William K. Mahler

Reply | Messages in this Topic (1)

#1634 From: "Bradford L. Barrett" <brad@...>
Date: Wed Oct 2, 2002 3:25 pm
Subject: Re: What is the difference between Extreme Tracking & Webalizer...I have both.. brad@...
Send Email

> I use Extreme Tracking, the free tracker on 5 pages of my site,
> www.mahlers.com.  On average I am getting visited 4 to 5 times per day
> according to Extreme Tracking.  On the other hand, via my webhost,
> Hostsave.com, Webalizer has reported 50 to 110 hits per day with a total
> of nearly 32000 hits since the first week of July 2002.  I ask you, why
> such a tremendous difference?  What does Webalizer do regarding hits
> that Extreme Tracking doesn't?

Remote 'counters' are not accurate and can easily be circumvented. The
only accurate method to determine web server usage is by using the log
file it generates.

--
Bradford L. Barrett                      brad@...
A free electron in a sea of neutrons     DoD#1750 KD4NAW

The only thing Micro$oft has done for society, is make people
believe that computers are inherently unreliable.

Reply | Messages in this Topic (5)

#1635 From: "John Elvin" <john@...>
Date: Wed Oct 2, 2002 6:53 pm
Subject: RE: What is the difference between Extreme Tracking & Webalizer...I have both.. john_elvin
Send Email

If you have links on the counted pages which someone clicks before Extreme
Tracking counts their visit, then I suspect this could be a cause of the
discrepancy. I also use both and my Webalizer visits are consistently higher
than Extreme Tracking.

John

-----Original Message-----
From: W. K. Mahler [mailto:lkmwkm@...]
Sent: 2 October 2002 12:47
To: Webalizer
Subject: [webalizer] What is the difference between Extreme Tracking &
Webalizer...I have both..


Hello,

I use Extreme Tracking, the free tracker on 5 pages of my site,
www.mahlers.com.  On average I am getting visited 4 to 5 times per day
according to Extreme Tracking.  On the other hand, via my webhost,
Hostsave.com, Webalizer has reported 50 to 110 hits per day with a total of
nearly 32000 hits since the first week of July 2002.  I ask you, why such a
tremendous difference?  What does Webalizer do regarding hits that Extreme
Tracking doesn't?

Thanks,

William K. Mahler

Yahoo! Groups Sponsor
ADVERTISEMENT




To unsubscribe from this group, send an email to:
webalizer-unsubscribe@egroups.com
Webalizer homepage: http://www.webalizer.org
Webalizer for NT: http://www.medasys-lille.com/webalizer/




Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.

Reply | Messages in this Topic (5)

#1636 From: "Cake \(Edmond\)" <e.lo@...>
Date: Thu Oct 3, 2002 2:06 am
Subject: RE: IIS5 showing incorrect time cho299xx
Send Email

Hi Rob,

The default IIS5 logs use Greenish Mean Time instead of the actual time on
your system. If you want the time in your logs matches that of your system,
change your log format to say Microsoft IIS format.

Cheers,

Edmond.

> -----Original Message-----
> From: daddy_root [mailto:robshort@...]
> Sent: Wednesday, October 02, 2002 12:58 AM
> To: webalizer@yahoogroups.com
> Subject: [webalizer] IIS5 showing incorrect time
>
>
> I've noticed that the time on my computer and the time on my IIS5
> logs are off by about 4 hours. i.e., if it's 7:00 AM, my log shows
> 11:00 AM. Any ideas on how to fix this? There don't seem to be any
> configurable options for time within IIS itself.
>
> Also - does anyone know of a good HOWTO for setting up reverse DNS
> lookup within webalizer?
>
>
> Regards,
>
>
> Rob
>
>
>
> To unsubscribe from this group, send an email to:
> webalizer-unsubscribe@egroups.com
> Webalizer homepage: http://www.webalizer.org
> Webalizer for NT: http://www.medasys-lille.com/webalizer/
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>

Reply | Messages in this Topic (3)

#1637 From: "Marcus Cent" <marcus.cent@...>
Date: Thu Oct 3, 2002 11:27 pm
Subject: New version not running.. MarcusCent
Send Email

Hi,

I asked a question about a week ago about no stats being shown after I upgraded from V1.3 to V2.01. Now that we're into a new month I can see that Webalizer is no longer working. All my files for September are there but nothing beyond the date that I did the upgrade on my RAQ4.

I'm new to RAQ's and command-line working but I can see that the cron.daily contains the webalizer.pl script. When I run this via telnet I get;

Using logfile STDIN ,clf>
Creating output in current directory
Hostnem for reports is ns.srbookingengine.co.uk
History file not found...

Warning: truncating oversized hostname
Skipping bad record [xx]

As the reports were being run for about 100 sites on the server I'm really keen to get it working again. Could a kind person point me in the right direction. Many thanks to Steven for answering for answering last time...but that didn't seem to be the problem..

Marcus Cent
Tourism Exchange � Digital Strategy and Solutions for the Tourism Industry
marcus.cent@...
T. 0141-586-0138

Visit us at http://www.tourismexchange.net and http://www.simplyreserve.co.uk - The Online Booking Manager for the tourism industry

------------------------------

CONFIDENTIAL:

This e-mail, its content and any files transmitted with it are intended only for the person it is addressed to - any other access is unauthorised and you must not copy or use the content. If you have received this in error, please destroy it and contact the sender by e-mail return.

DISCLAIMER:

Whilst we take reasonable precautions to minimise risk, you must carry out your own virus checks before opening attachments or reading e-mails and we do not accept liability for any damage or loss in this respect. This e-mail and its attachments may be subject to copyright protection and you should not retransmit or reproduce these without the consent of the author. Non-business related content is not authorised by us and we shall not be liable for it.

---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.391 / Virus Database: 222 - Release Date: 19/09/2002

Reply | Messages in this Topic (1)

#1638 From: "Jan" <j.ruitenbeek@...>
Date: Fri Oct 4, 2002 1:17 pm
Subject: Strange webalizer problem ruitenbk
Send Email

Hi all,

I found this group while browsing the net to find a solution to a
strange webalizer problem (webalizer version 2.01.06).

I edited webalizer.conf grouping options and then started webalizer.
Everything went find, but I didn't like the output (somewhere made an
error in the grouping options). I undid the changes and webalizer
gave an error message "Error: Unable to restore run data (10)".

Webalizer won't start anymore, the only thing I get is this annoying
error message. How do I get webalizer working again?

Thanks in advance.

Greetings,

Jan

Reply | Messages in this Topic (1)

#1639 From: "Irfan Uygur" <irfan@...>
Date: Sat Oct 5, 2002 9:44 am
Subject: summary of all domains possible ? irfan_uygur
Send Email

Hi everybody,

I've been using webalizer recently to generate statistics for my customers and I
think
that's a great software. Thanks to the developers of the program.

One think that I would like to do is to generate a total report of all domains
to see an overall traffic.
I have over 500 domains that I produce individiual reports for all my customers
so that they can
track their own traffic. Bu when it comes to me , to track which domain is
generating traffic, my only option
is to visit all some 500 reports page by page. Is it also possible to generate a
"summary of all domains" report
page so that  I can compare which domains are creating more traffic and which
not ?

I've searched this mailing list and the documentation within the software but
could not find an answer.
Any suggestions/offers pointing me (I'm a newbie for webalizer) would be greatly
appreciated....

Regards,
Irfan Uygur
irfan@...

Reply | Messages in this Topic (1)

#1640 From: "zedan_11" <zedan_11@...>
Date: Sun Oct 6, 2002 8:34 am
Subject: webalizer not read the past log zedan_11
Send Email

if i skiped the log file say for yestarday and tried
to run webalizer to get information about yestarday
log file it not shows information how to solve this problem
any help

Reply | Messages in this Topic (1)

#1641 From: Oriol Garcia <uri@...>
Date: Mon Oct 7, 2002 11:02 am
Subject: Clients and visits webalizer2002
Send Email

Hi

We change webalizer 1.36 to 2.01 all with no webalizer.conf ( default conf
).We noticed that in webalizer 1.36 clients are less than visits.... now in
webalizer 2.01 visits are less than clients anyone have an idea why this
happens?

Regards

Reply | Messages in this Topic (3)

#1642 From: "Jason Purdy" <jason@...>
Date: Mon Oct 7, 2002 4:15 pm
Subject: WA ignoring some hits jpurdy2
Send Email

I have a logfile with over 400,000 hits and for some reason, it's not
picking up about 12,000 hits for a particular day.  Webalizer has been
pretty consistent for me over the last year, but for this one day, it just
doesn't seem to pick them up.

Any ideas?  I do have one IgnoreSite directive, but looking at the hits,
none of them match the ignore site.

Thanks in advance for any help you can provide.

Jason

PS: Version 2.01-09

Reply | Messages in this Topic (1)

#1643 From: "Richard Unwin" <dush.unwin@...>
Date: Tue Oct 8, 2002 10:01 am
Subject: New month ignores conf file! hornblowerguru
Send Email

Whenever I start a new site or Webalizer starts compiling a new month, it ignores part of the conf file - namely the Seach Strings. To get it working again, I have to upload a default conf, wait for cronjob, then upload my amended conf. Then it works no problem - until the next month...!!

Does anyone know why this is? Is it a problem in the conf (I don't see how, as it does work eventually), a bug in Webalizer or a problem with my site's hosts executing of the Webalizer? (I don't run Webalizer myself - I only have .conf file access)

Thoughts gratefully received

Reply | Messages in this Topic (1)

#1644 From: Kevin Shortt <kevin_shortt@...>
Date: Tue Oct 8, 2002 3:17 pm
Subject: Re: Headings kevin_shortt
Send Email

They are listed in the README file.
ftp://ftp.mrunix.net/pub/webalizer/README

Scroll down to the "Output Produced" section.

Hope this helps...

-k


--- "jlamarca.geo" <jlamarca.geo@...> wrote:
> I would really like to know what the exact meanings
> of each statistic
> refers to - I've looked all over the 'net and can't
> find any
> specifics for such things as:
>
> Total URLs
> Total URLs By KBytes
> Total Entry Pages
> Exit Pages
> Total Sites
> Total Sites By KBytes
> Total Referrers, etc.
>
> Thanks.
>
>
> ------------------------ Yahoo! Groups Sponsor
>
> To unsubscribe from this group, send an email to:
> webalizer-unsubscribe@egroups.com
> Webalizer homepage: http://www.webalizer.org
> Webalizer for NT:
> http://www.medasys-lille.com/webalizer/
>
>
>
>
> Your use of Yahoo! Groups is subject to
> http://docs.yahoo.com/info/terms/
>
>


__________________________________________________
Do you Yahoo!?
Faith Hill - Exclusive Performances, Videos & More
http://faith.yahoo.com

Reply | Messages in this Topic (2)

#1645 From: "f_holub" <lists@...>
Date: Thu Oct 10, 2002 1:57 pm
Subject: Webalizer Stops... f_holub
Send Email

After 8 months of perfect operation, it seems that webalizer cannot
read past a log file ending October 6th. After that it just exits and
doesn't process any more log files...
Any thoughts? Anybody else have this problem?

Frank
http://www.my-spot.com

Reply | Messages in this Topic (3)

#1646 From: "Jean-Noel Hayart" <jnhayart@...>
Date: Thu Oct 10, 2002 4:24 pm
Subject: RE: Webalizer Stops... jnwebalizer
Send Email

hello

only if you use webalizer on Windows :

check number of log file in folder, if you use tag folderlog in
webalizer.conf, folder reading is limited to 250 files, change extension of
somes, and restart webalizer
you can use also "renamelog" for webalizer change extension after process
all a file.

regards

> -----Message d'origine-----
> De : f_holub [mailto:lists@...]
> Envoye : Thursday, October 10, 2002 3:57 PM
> A : webalizer@yahoogroups.com
> Objet : [webalizer] Webalizer Stops...
>
>
> After 8 months of perfect operation, it seems that webalizer cannot
> read past a log file ending October 6th. After that it just exits and
> doesn't process any more log files...
> Any thoughts? Anybody else have this problem?
>
> Frank
> http://www.my-spot.com
>
>
>
> To unsubscribe from this group, send an email to:
> webalizer-unsubscribe@egroups.com
> Webalizer homepage: http://www.webalizer.org
> Webalizer for NT: http://www.medasys-lille.com/webalizer/
>
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>

Reply | Messages in this Topic (3)

#1647 From: Frank Roessler <frank@...>
Date: Thu Oct 10, 2002 7:48 pm
Subject: Re: Webalizer Stops... keyz_de
Send Email

Check your logs for strange characters.

I had the case where someone attempted to find a hole in my apache
(Nimda-Style: ...%2c/../winnt/..., etc.) and also sent some GET-Requests
with invalid characters (#127, #255, ...).
After deleting these lines in the logs, everything worked fine again...

Hope this helps.

Frank

f_holub schrieb:
>
> After 8 months of perfect operation, it seems that webalizer cannot
> read past a log file ending October 6th. After that it just exits and
> doesn't process any more log files...
> Any thoughts? Anybody else have this problem?
>
> Frank
> http://www.my-spot.com
>
>
> To unsubscribe from this group, send an email to:
> webalizer-unsubscribe@egroups.com
> Webalizer homepage: http://www.webalizer.org
> Webalizer for NT: http://www.medasys-lille.com/webalizer/
>
>
>
> Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Reply | Messages in this Topic (3)

#1648 From: Klaus Kettner <kk@...>
Date: Fri Oct 11, 2002 12:21 pm
Subject: webalizer.current is getting huge! klauskettner
Send Email

Hi,

i am processing logfiles from one of our proxies (squid), the logfiles
have about 500 MB daily (daily, yes). As i also process them daily, my
webalizer.current grows and grows and grows. After processing 20 days,
my logfile is nearly 400 MB large and that seems to slow down Webalizer
dramatically.

Processing one logfile takes nearly 2 hours on a dual-prozessor Pentium
III 700 MHz with 4 Gigs of memory, on the first day of the month - with
an empty webalizer.current - it just takes 10 minutes to run.

Any ideas? Would processing of the complete month (no traffic on weekends,
~15 Gig Logfile) be more efficient, when the incremental option is dis-
abled?

--
         -kk-

Siemens Business Services  |  Telefon 0911/9783069  |  N 49�28'59,7"
ITS ORS AHS 232 -  Fuerth  |  Mobil   0160/8853483  |  E 10�57'37,1"

Reply | Messages in this Topic (1)

#1649 From: "robertbogdon" <robertbogdon@...>
Date: Fri Oct 11, 2002 2:45 pm
Subject: 2GB+ log files robertbogdon
Send Email

I'm running into an issue using webalizer with large log files on a
local drive.  It seems that files over 2GB in size, which are stored
locally, give the error:  Error: Can't open log file /data/logs/...
However, I am able to process files that are accessed via NFS, going
up to 20 or 30GB.  I would greatly appreciate it if anyone could
point me in the right direction on this problem.

Reply | Messages in this Topic (1)

#1650 From: "Frederic Trudeau" <frederic.trudeau@...>
Date: Fri Oct 11, 2002 5:20 pm
Subject: problem dealing with URLS showed. fredtrudo
Send Email

Hello all.

Im currently dealing with a business that installed a sutom publishing system on their main web server.

The format of the logs are fine, but its the way that the URL format is used by this publishing system that causes me a problem.

The main site is http://www.virginislandsdailynews.com/, and the default script loaded is 'index.pl'. Now, every section of the site is not indentified by http://www.virginislandsdailynews.com/section1/, http://www.virginislandsdailynews.com/section2/, but http://www.virginislandsdailynews.com/index.pl/section1, http://www.virginislandsdailynews.com/index.pl/section2.

What is showed on webalizer is that 90%+ of accessed URL is / (thus, index.pl), which is not true.

How can I ask webalizer, in the config file, to treat any instance of index.pl/* as an actual and valid URL ?

Any help would be appreciated !

= )

---------------------------------------------------
Frederic Trudeau
Consultant, PHP Coder, Development
frederic.trudeau@...

Reply | Messages in this Topic (1)

#1651 From: "John D. Van Griethuysen, N2BNE" <jvangri1@...>
Date: Sun Oct 13, 2002 4:29 pm
Subject: Will Webalyzer work an a Win 200k server? n2bne
Send Email

Hello,
I am the unpaid webmaster for our Boy Scout Troop's website.
Last year we moved from a Unix server to a Win 2000 system.
The Webalyzer we used to use obviously no longer works on our new site

I just found the link that lead me to this site
http://www.medasys-lille.com/webalizer/
Greetings,
I see there is a Webalizer for windows 9x/ME/NT/2k  link on a
Webalizer users group listing so I have to assume
that some of you have installed it and used on Win2K systems.

Before I go and try to install it on our site,
     What kind of grief am I going to be looking at?

I am looking for a detailed "How to Install" file  or a  help file,
Is there one available?

The Sysop of our Host site has pretty much told me I am on
my own on this venture as we are on the lowest budget plan
that they have.  I did get a note from their "Server Guy' telling me
they do not currently support customer provided/written CGI scripts.
They do support VBScript, JavaScript and PerlScript.

With these restrictions will be able to run Webalizer on our site?

I look forward to any response,
Thank you in advance

--... Best regards, ...--
     John D. Van Griethuysen, N2BNE, NE-V126

      Rochester, NY.  14615

     http://t173.ny.bsatroops.org/
=======================================================
You Might Be Taking Your Scouting Too Seriously If...
# 39 ... if the Scouts in your troop chipped in to have you abducted
  by a professional cult de-programmer.    ...-.-
=========================================================

Reply | Messages in this Topic (2)

#1652 From: "Waitman C. Gobble" <waitman@...>
Date: Sun Oct 13, 2002 5:02 pm
Subject: Re: Will Webalyzer work an a Win 200k server? rooey2002
Send Email

Hello

The Windows distribution would run as a single executable file, you
wouldn't really have to do an "install" on the server. you would just
have to get the exe file and your config file uploaded and talk your
hostmaster into running it from the task scheduler or AT on a daily
basis.

However, if your hostmaster won't let you run custom cgi's then they may
not entertain the idea of running webalizer on the server.

The alternative would be to download your log files, run it on your
computer, and upload the resultant reports back to the server.

Actually, if you used something like webdrive (webdrive.com) to remote
connect through ftp, you could likely run this on a schedule from your
own machine.

Anyhow, if you need any help feel free to contact me. I am an Eagle
Scout and don't mind lending a hand.

Best,

Waitman Gobble
EMK Design
Buena Park California
+1.7145222528
http://emkdesign.com



On Sun, 2002-10-13 at 09:29, John D. Van Griethuysen, N2BNE wrote:
     Hello,
     I am the unpaid webmaster for our Boy Scout Troop's website.
     Last year we moved from a Unix server to a Win 2000 system.
     The Webalyzer we used to use obviously no longer works on our new site

     I just found the link that lead me to this site
     http://www.medasys-lille.com/webalizer/
     Greetings,
     I see there is a Webalizer for windows 9x/ME/NT/2k  link on a
     Webalizer users group listing so I have to assume
     that some of you have installed it and used on Win2K systems.

     Before I go and try to install it on our site,
         What kind of grief am I going to be looking at?

     I am looking for a detailed "How to Install" file  or a  help file,
     Is there one available?

     The Sysop of our Host site has pretty much told me I am on
     my own on this venture as we are on the lowest budget plan
     that they have.  I did get a note from their "Server Guy' telling me
     they do not currently support customer provided/written CGI scripts.
     They do support VBScript, JavaScript and PerlScript.

     With these restrictions will be able to run Webalizer on our site?

     I look forward to any response,
     Thank you in advance

     --... Best regards, ...--
         John D. Van Griethuysen, N2BNE, NE-V126

          Rochester, NY.  14615

         http://t173.ny.bsatroops.org/
     =======================================================
     You Might Be Taking Your Scouting Too Seriously If...
     # 39 ... if the Scouts in your troop chipped in to have you abducted
      by a professional cult de-programmer.    ...-.-
     =========================================================


     To unsubscribe from this group, send an email to:
     webalizer-unsubscribe@egroups.com
     Webalizer homepage: http://www.webalizer.org
     Webalizer for NT: http://www.medasys-lille.com/webalizer/




     Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/

Reply | Messages in this Topic (2)

#1653 From: "Andrew" <tak@...>
Date: Sun Oct 13, 2002 8:29 pm
Subject: Convlog Utility Failing bennoach28
Send Email

When I run the 'convlog' command to convert W3C log files to NCSA, the list
of switches and parameters is displayed, as if I had typed "convlog /?".  My
line is written as follows:

convlog -ie %convert%/%logdir% -o %logdir%

It was working before with no problem.  The server hadn't been touched in a
couple of days, and when I ran the utility, up pops the list.  Can anyone
help on this?  Thanks.

Reply | Messages in this Topic (1)

#1654 From: "-= Raimund Pock =-" <rp@...>
Date: Mon Oct 14, 2002 6:19 am
Subject: -= webalizer for windows apache =- rp@...
Send Email

Hi all!

Does anybody know, if there is a version of Webalizer for Windows APACHE?

Thanks for your answers!

Best regards
Ray

Reply | Messages in this Topic (2)

Yahoo! Groups

Breaking News Visit Yahoo! News for the latest.

The Yahoo! Groups Product Blog

Check it out!

Group Information

Yahoo! Groups Tips

Did you know...

Messages