hi all. glad to be a member here. could anyone please help me solve this
problem?

i have windows 2000 and was tying to install a program called Mass Article
Control which automatically turn your article into several.
i tried to install it and the pc said that i needed to install Windows .Netframe
3.5 but when i tried that it said the the "HeapSEtInformation" was not located
in the "Kernell32.dll---

what do i do now? how an i fix this so i can go ahead and install my software
program?  i really need it to.


please help all.


thanks,

Hi Members,

I will be entering hospital in the next few days and will not be
available for a couple of weeks.

Stay safe,

John Lehn

Yesterday I had two pc's to perform a system restoration on.  One a
Compaq and the other a E-Machines.  All went well with no errors as
usual but,  The Compaq refuses to get updates from MS.  I chose MS
updates vs Windows updates on both.

The Compaq will got to the update screen fine and after
choosing "Custom" it will sit for hours on end with the laser moving
and never display a list of items to update.  I finally ran the SP-2
disk to give it a little better protection and hoping it would nudge
the update to start working but NOT.  I even chose in updates
properties to download but allow me to choose when to install them.  In
some cases I have found this works to get things started.  But nothing
shows in the system tray.

The E-machines at the same time seems to work perfectly at the update
site.

Garry B

Unix question & Answers
at
http://unixqa.blogspot.com/

My new Computer has Vista and a DVDcombo drive its a DVD,DVD Burner and
a CD REWRITABLE drive but it has no software for it, is there a FREE
Software I can download that I can watch DVD's and Burn movies to a DVD-
R and if there is are there any FREE ones .

I wish all members a very Merry Christmas, and a safe prosperous 2008.

Best wishes from "Down Under"

John Lehn

Hi,

I am fairly sure this DLL does not have to be
registered.

However, you can do NO damage by trying to register
it.  It will either return a "success" message of a
"fail" message.

If you want to try this go:

START > RUN  > and type Regsvr32 DLL name and hit
enter.  Make sure there is a space between 32 and the
DLL name.

Example:  "regsvr32 riched32.dll" (without the
quotes).

Again, I say you can do NO damage to your system and
it might, might fix the problem.

Cheers,

John Lehn
-------------------------------------------------------
--- graymcneess <graymcneess@...> wrote:

> Hi
> I am still get the same error any more suggestions
> by the way I am
> using Windows XP home edition
>
<SNIP>

Yes I am still getting the same message after installing the DLL
--- In windows-tips@yahoogroups.com, "Don Roberts" <lists@...> wrote:
>
> You get the same error even after installing the DLL?
>
> On Nov 10, 2007 12:08 PM, graymcneess graymcneess@... wrote:
>
> > Hi
> > I am still get the same error any more suggestions by the way I am
> > using Windows XP home edition
> >
> >
> >
> > IMPORTANT ADDRESSES:
> >
> > Post message: windows-tips@yahoogroups.com
> > Subscribe: windows-tips-subscribe@yahoogroups.com
> > Unsubscribe: windows-tips-unsubscribe@yahoogroups.com
> > List owner: windows-tips-owner@yahoogroups.com
> > List URL: http://groups.yahoo.com/group/windows-tips
> >
> > Windows Tips and Tricks Mailing List
> > windows-tips@yahoogroups.com
> > Don Roberts - Creator
> > http://www.drscripting.com
> > Yahoo! Groups Links
> >
> >
> >
> >
>
>
> --
> Don Roberts - don@...
> http://www.myspace.com/donroberts
>

Hi
I am still get the same error any more suggestions by the way I am
using Windows XP home edition

Hi again,

A little more research (which I perhaps should have
done before) revealed that M$ has an item on this
error.

Go here:

http://support.microsoft.com/kb/q218838/

Again, HTH,

John Lehn
----------------------------------------------------
--- John Lehn <johnelehn2002@...> wrote:

> Hi there,
>
> This DLL can be found and DL from the site below.
>
> Open the site and look to the left top of the window
> and select DLL Files.
>
> Look to the column at the right hand side and select
> "DLL FILE RO3".  You will find the DLL you are
> looking
> for in there, and you can DL it and place it in
> "C:\windows\system32"
>
> Of course your problem may not be a simple missing
> file but something deeper. BTW, this DLL does not
> need
> registering to your system, I think ;-)
>
> http://www.dynamiclink.nl/
>
> HTH,
>
> John Lehn (Sydney Australia)
> <SNIP>

Hi there,

This DLL can be found and DL from the site below.

Open the site and look to the left top of the window
and select DLL Files.

Look to the column at the right hand side and select
"DLL FILE RO3".  You will find the DLL you are looking
for in there, and you can DL it and place it in
"C:\windows\system32"

Of course your problem may not be a simple missing
file but something deeper. BTW, this DLL does not need
registering to your system, I think ;-)

http://www.dynamiclink.nl/

HTH,

John Lehn (Sydney Australia)
-------------------------------------------------------


--- graymcneess <graymcneess@...> wrote:

> I am getting an error message when using outlook
> express it says
> Riched32.dll is missing any ideas. It will not let
> me open or read any

> message away frim the preview scree
><SNIP>

I am getting an error message when using outlook express it says
Riched32.dll is missing any ideas. It will not let me open or read any
message away frim the preview scree

--- In windows-tips@yahoogroups.com, "Dini" <dinidanielq8@...> wrote:
>
> Hi
> im facing a serious problem
> when im trying to access registry in my PC,getting this error
message.
> "registry editing has been disabled by your administrator"
> Task Manager also disabled automatically.
> How can i over come this situation.
> Dini
>
Hi Dini,

I'm sure you got the pc from an intitute or office where only the
moderator is allowed to make changes in the registry. In case you
have windows XP you can try "systemrecovery" (I don't know the
english term for it. It can be found here: Start, Officeworkset and
than systemworkset and than you see "systemrecovery" (it's possible
that in english it has a specific name. If you have found this than
you "go back in time" by picking a date in the past (on the right
site you can see the changes that had been made at that particular
date; go as far back in time until you found the date that the shop
where it has been bought had put the original software on it (that
was before the moderator put in the restrictions. If you have
another windowsversion you might consider formatting the hard drive
but than you also have to install the right drivers for the VGA
screen, audio-equipment etc.

I hope you can do something with my reply.

I wish you well,
Friedrich from Holland

I've tried installing google earth but I get an error 1401 message,
more specifically, it refers to HK USER  software . The correct HkEY is
available to anyone who can help me unravel this. Short of reinstalling
I am curious about repairing this error. All these took place after I
nailed a trojan and removed it. A remnant of it- "kill vbs"- is still
on my pc but is harmless and more or less a nuisance nag screen as the
link has been erased. Thanks for the help.

You have been sent this message from format4nz@... as a courtesy of
washingtonpost.com

  Personal Message:
  Hopefully this will be of interest to some. Have you noticed, the cheaper
printers have become, the size of the ink cartridge has reduced correspondingly?
Paul

  Save Money on Inkjet Printer Ink

  Steve Bass

  I'm not happy with the inflated cost of inkjet cartridges. I also despise the
games inkjet manufacturers play to get you to replace cartridges that may still
have ink inside.

  To view the entire article, go to
http://www.washingtonpost.com/wp-dyn/content/article/2007/07/05/AR2007070500028.\
html?referrer=emailarticle


  Would you like to send this article to a friend? Go to
http://www.washingtonpost.com/ac2/wp-dyn/emailafriend?contentId=AR2007070500028&\
sent=no&referrer=emailarticle


Want the latest news in your inbox? Check out washingtonpost.com's e-mail
newsletters:

http://www.washingtonpost.com/ac2/wp-dyn?node=admin/email&referrer=emailarticle

Washingtonpost.Newsweek Interactive
c/o E-mail Customer Care
1515 N. Courthouse Road
Arlington, VA 22201

© 2002 - 2006 The Washington Post Company

Hi!

  I've just joined this group. Thank you to whoever started it!

My question is:

In Xp, I wish to open a file in any program. I click 'file' 'open' and
get the window with the thumbnails, details or whatever listing type it
comes up with.
Is it possible to choose a default of say thumbnails for .jpg files,
and details for some other directory?

TIA
Any help will be much appreciated.

Bill

any one can help me to change the Administrator Password in XP?
I have a power User Account and I forgot the Administrator Password.
Anyone has a too for that account add to the Administrators group or
change the password the Admin's Account?
because I have't Floppy Drive or USB drive. I only have Internet. Pls.
anyone knws that kind of tool ls. Mail me.

Thanks.
Harshana
wmharshana@gmail. com

I have a HP media center PC that the hard drive failed on.  I am having
trouble finding a CD that will let me use the Product ID attached to
the PC.  No HP restore CD or DVD's available.

I have tried a XP-home-full SP-1
I have tried a XP-Home-Full SP-2
I have tried a XP-home-Oem-SP-1
I have tried a XP-home-oem-sp-2

Does media center have it's own unique CD or DVD?

Garry B

----- Original Message -----

From: Douglas J Kuhns

To: windows-tips@yahoogroups.com

Sent: Wednesday, January 17, 2007 6:31 PM

Subject: Re: [windows-tips] Santa Cruz & Dell Keyboard

I have a 4 year old top of the line DELL desktop on which I just
replaced the hard drive. The DELL multimedia KB has keys on it to
raise/lower/mute the volume. Before the hard drive crash those keys
worked great. Since the replacement of the hard drive and the
reinstall of the CD the keys no longer work.

Can anyone give me a clue as to how I reactivate those keys and their
screen view?

It has a Santa Cruz sound card.
.___

.

I have a 4 year old top of the line DELL desktop on which I just
replaced the hard drive. The DELL multimedia KB has keys on it to
raise/lower/mute the volume. Before the hard drive crash those keys
worked great. Since the replacement of the hard drive and the
reinstall of the CD the keys no longer work.

Can anyone give me a clue as to how I reactivate those keys and their
screen view?

It has a Santa Cruz sound card.

HI

I configured a smallbusiness server 2k3 (win2k3
server, sql2005, isa, exchange 2003) . Here the
problem is we have seperate network with internet
connection -dsl in a workgroup. normaly for gettng
internet connection client machine has to configure
with the following level

ip- 192.168.0...

deafault gateway - dsl modems' or routers ip
-192.168.0.20

dns adress : isps dns server id s as alternative id
and preferrd id

in this configuration we used to get it

Now i wanna change the entire setup in one domain and
i configured a domain controler having windows 2k3
with 2 network cards( because there is builtin
firewall and isa protectection)

now first nic which connect to lan i put ip like
192.168.0.1 and enabled dhcp services and client
machine can conect now but whn i put 192.168.0.2 on
other nic poiting the default gateway as routers ip
its not getng ...have nybody know the configuration .
how to cnt the internet.

2. client machine's deafualt gateway should be the
server ip

3. want share the network connection

pls give solution

iam looking to pass 070-290 exam . how good is certmagic.com
braindump for this exam ? . i look forward to your replies.

Hi to all members and Mods,

I wish you all the best for the coming Season, and a safe, prosperous
computer error free 2007.

My best wishes to all From Australia.

John Lehn