I'm going to be moving into a new home shortly so I will be changing my
ISP.  I'm considering going completely wireless with Sprint's Wireless
Broadband and using it with the Linksys Mobile Broadband Router
(WRT54G3g).  Are any members of this group using the WMLS11B with this
configuration?  If so, I'd be interested in hearing your experiences.
I've really become attached to my WMLS11B's so I don't want to get
myself in a position where they won't work reliably.

TIA for your help.

Shannon

A little background info . I purchased my wmls11b 6 or 8 months ago. I
updated the Bios to version 2.3.6  and it ran fine with trial
subscription. Slowly stations started not to connect. I guessed they
changed ip address?? I still had 2 or 3 stations that worked. So I
deceided to sign up for the subscription saw a link for a deal $19.95.
My Problem I can not update manually or automatic. Error message
update failed. I followed the instructions on this forums post>>>

  >.On 6/23/07, Earl Bullock <deskjett6@...> wrote: If you take
>a pin or pencil point and push in the "reset button" to the right of
>your RCA speaker connections that should resolve both issues. You
>will then be able to manually update your radio stations and play
>them. I think the problem is when you update your firmware without
>resetting, your radio will still play the radios stations but will
>not allow you to update. I simulated your problem and did the above.
>It worked for me. Give it a try!

No Good Can some one help me please. After the reset I lost my
favorites no suprise there and the Date for the Station list now reads
"EMPTY".

Thanks in advance, Jim

Do you have the WMLS11B connected directly?  If not, check "network"
to see the signal strength of the wireless connection.

Since you are a subscriber, you can contact linksysradio.com via web email:
http://www.linksysradio.com/setupapp/linksys1/asp/Help/SSComment.asp

Best

David

On Tue, May 6, 2008 at 12:52 AM, jlt1224 <jlt1224@...> wrote:
>   A little background info . I purchased my wmls11b 6 or 8 months ago. I
>  updated the Bios to version 2.3.6  and it ran fine with trial
>  subscription. Slowly stations started not to connect. I guessed they
>  changed ip address?? I still had 2 or 3 stations that worked. So I
>  deceided to sign up for the subscription saw a link for a deal $19.95.
>  My Problem I can not update manually or automatic. Error message
>  update failed. I followed the instructions on this forums post>>>
>
>   >.On 6/23/07, Earl Bullock <deskjett6@...> wrote: If you take
>  >a pin or pencil point and push in the "reset button" to the right of
>  >your RCA speaker connections that should resolve both issues. You
>  >will then be able to manually update your radio stations and play
>  >them. I think the problem is when you update your firmware without
>  >resetting, your radio will still play the radios stations but will
>  >not allow you to update. I simulated your problem and did the above.
>  >It worked for me. Give it a try!
>
>  No Good Can some one help me please. After the reset I lost my
>  favorites no suprise there and the Date for the Station list now reads
>  "EMPTY".
>
>  Thanks in advance, Jim
>
>
>  ------------------------------------
>
>  Yahoo! Groups Links
>
>
>
>

I am using it wireless it says the signal strength is excellent. It
was working until I started the update saga.  I emailed them no reply
since saturday?



--- In wmls11b@yahoogroups.com, "David Ring" <n1ea@...> wrote:
>
> Do you have the WMLS11B connected directly?  If not, check "network"
> to see the signal strength of the wireless connection.
>
> Since you are a subscriber, you can contact linksysradio.com via web
email:
> http://www.linksysradio.com/setupapp/linksys1/asp/Help/SSComment.asp
>
> Best
>
> David
>
> On Tue, May 6, 2008 at 12:52 AM, jlt1224 <jlt1224@...> wrote:
> >   A little background info . I purchased my wmls11b 6 or 8 months
ago. I
> >  updated the Bios to version 2.3.6  and it ran fine with trial
> >  subscription. Slowly stations started not to connect. I guessed they
> >  changed ip address?? I still had 2 or 3 stations that worked. So I
> >  deceided to sign up for the subscription saw a link for a deal
$19.95.
> >  My Problem I can not update manually or automatic. Error message
> >  update failed. I followed the instructions on this forums post>>>
> >
> >   >.On 6/23/07, Earl Bullock <deskjett6@> wrote: If you take
> >  >a pin or pencil point and push in the "reset button" to the right of
> >  >your RCA speaker connections that should resolve both issues. You
> >  >will then be able to manually update your radio stations and play
> >  >them. I think the problem is when you update your firmware without
> >  >resetting, your radio will still play the radios stations but will
> >  >not allow you to update. I simulated your problem and did the above.
> >  >It worked for me. Give it a try!
> >
> >  No Good Can some one help me please. After the reset I lost my
> >  favorites no suprise there and the Date for the Station list now
reads
> >  "EMPTY".
> >
> >  Thanks in advance, Jim
> >
> >
> >  ------------------------------------
> >
> >  Yahoo! Groups Links
> >
> >
> >
> >
>

Yes I can log in I regestered 6-8 months ago. I just signed up for the
super vtuner subscription friday. Is there a waiting period or is it
instant?  I have set up music directories and selected several
stations. I checked to see that the mac # was correct and it is. every
thing looks like it should work, but it doesn't i'm at a loss ???


--- In wmls11b@yahoogroups.com, "Gary Fisher" <gafisher@...> wrote:
>
> Hi, Jim!
>
> >> "... no reply since saturday?"
>
> Give them another day or two, but LinksysRadio support has always
been very good when I've contacted them.
>
> Are you able to log in to your account at
http://www.linksysradio.com using your registered email address and
password?
>
> All the best,
>
> Gary
>
>
>
> Find the work you'll LOVE!
>
>
> From: jlt1224
> Sent: Monday, May 05, 2008 1:19 PM
> To: wmls11b@yahoogroups.com
> Subject: [wmls11b] Re: bought super vtuner subscription. still can't
update
>
>
> I am using it wireless it says the signal strength is excellent. It
> was working until I started the update saga. I emailed them no reply
> since saturday?
>
> --- In wmls11b@yahoogroups.com, "David Ring" <n1ea@> wrote:
> >
> > Do you have the WMLS11B connected directly? If not, check "network"
> > to see the signal strength of the wireless connection.
> >
> > Since you are a subscriber, you can contact linksysradio.com via web
> email:
> > http://www.linksysradio.com/setupapp/linksys1/asp/Help/SSComment.asp
> >
> > Best
> >
> > David
> >
> > On Tue, May 6, 2008 at 12:52 AM, jlt1224 <jlt1224@> wrote:
> > > A little background info . I purchased my wmls11b 6 or 8 months
> ago. I
> > > updated the Bios to version 2.3.6 and it ran fine with trial
> > > subscription. Slowly stations started not to connect. I guessed they
> > > changed ip address?? I still had 2 or 3 stations that worked. So I
> > > deceided to sign up for the subscription saw a link for a deal
> $19.95.
> > > My Problem I can not update manually or automatic. Error message
> > > update failed. I followed the instructions on this forums post>>>
> > >
> > > >.On 6/23/07, Earl Bullock <deskjett6@> wrote: If you take
> > > >a pin or pencil point and push in the "reset button" to the
right of
> > > >your RCA speaker connections that should resolve both issues. You
> > > >will then be able to manually update your radio stations and play
> > > >them. I think the problem is when you update your firmware without
> > > >resetting, your radio will still play the radios stations but will
> > > >not allow you to update. I simulated your problem and did the
above.
> > > >It worked for me. Give it a try!
> > >
> > > No Good Can some one help me please. After the reset I lost my
> > > favorites no suprise there and the Date for the Station list now
> reads
> > > "EMPTY".
> > >
> > > Thanks in advance, Jim
> > >
> > >
> > > ------------------------------------
> > >
> > > Yahoo! Groups Links
> > >
> > >
> > >
> > >
> >
>
>
>
>
>
>
>
--------------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 269.23.8/1415 - Release Date:
5/5/2008 6:01 AM
>

Thanks Gary I'll try to be patient
Regards, Jim



--- In wmls11b@yahoogroups.com, "Gary Fisher" <gafisher@...> wrote:
>
> Jim,
>
> The Super Service station list will activate with your next update,
whether manual or automatic, but since updating is where you're having
trouble that'll have to be dealt with first.  If you don't hear from
them today or tomorrow email them again in case your first note didn't
get through; my experience is that they respond quickly but tech
support might get weekends off for good behavior.  <s>
>
> Gary
>
>
>
>
> From: jlt1224
> Sent: Monday, May 05, 2008 2:01 PM
> To: wmls11b@yahoogroups.com
> Subject: [wmls11b] Re: bought super vtuner subscription. still can't
update
>
>
> Yes I can log in I regestered 6-8 months ago. I just signed up for the
> super vtuner subscription friday. Is there a waiting period or is it
> instant? I have set up music directories and selected several
> stations. I checked to see that the mac # was correct and it is. every
> thing looks like it should work, but it doesn't i'm at a loss ???
>
> --- In wmls11b@yahoogroups.com, "Gary Fisher" <gafisher@> wrote:
> >
> > Hi, Jim!
> >
> > >> "... no reply since saturday?"
> >
> > Give them another day or two, but LinksysRadio support has always
> been very good when I've contacted them.
> >
> > Are you able to log in to your account at
> http://www.linksysradio.com using your registered email address and
> password?
> >
> > All the best,
> >
> > Gary
> >
> >
> >
> > Find the work you'll LOVE!
> >
> >
> > From: jlt1224
> > Sent: Monday, May 05, 2008 1:19 PM
> > To: wmls11b@yahoogroups.com
> > Subject: [wmls11b] Re: bought super vtuner subscription. still can't
> update
> >
> >
> > I am using it wireless it says the signal strength is excellent. It
> > was working until I started the update saga. I emailed them no reply
> > since saturday?
> >
> > --- In wmls11b@yahoogroups.com, "David Ring" <n1ea@> wrote:
> > >
> > > Do you have the WMLS11B connected directly? If not, check "network"
> > > to see the signal strength of the wireless connection.
> > >
> > > Since you are a subscriber, you can contact linksysradio.com via web
> > email:
> > > http://www.linksysradio.com/setupapp/linksys1/asp/Help/SSComment.asp
> > >
> > > Best
> > >
> > > David
> > >
> > > On Tue, May 6, 2008 at 12:52 AM, jlt1224 <jlt1224@> wrote:
> > > > A little background info . I purchased my wmls11b 6 or 8 months
> > ago. I
> > > > updated the Bios to version 2.3.6 and it ran fine with trial
> > > > subscription. Slowly stations started not to connect. I
guessed they
> > > > changed ip address?? I still had 2 or 3 stations that worked. So I
> > > > deceided to sign up for the subscription saw a link for a deal
> > $19.95.
> > > > My Problem I can not update manually or automatic. Error message
> > > > update failed. I followed the instructions on this forums post>>>
> > > >
> > > > >.On 6/23/07, Earl Bullock <deskjett6@> wrote: If you take
> > > > >a pin or pencil point and push in the "reset button" to the
> right of
> > > > >your RCA speaker connections that should resolve both issues. You
> > > > >will then be able to manually update your radio stations and play
> > > > >them. I think the problem is when you update your firmware
without
> > > > >resetting, your radio will still play the radios stations but
will
> > > > >not allow you to update. I simulated your problem and did the
> above.
> > > > >It worked for me. Give it a try!
> > > >
> > > > No Good Can some one help me please. After the reset I lost my
> > > > favorites no suprise there and the Date for the Station list now
> > reads
> > > > "EMPTY".
> > > >
> > > > Thanks in advance, Jim
> > > >
> > > >
> > > > ------------------------------------
> > > >
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > >
> > >
> >
> >
> >
> >
> >
> >
> >
> ----------------------------------------------------------
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG.
> > Version: 7.5.524 / Virus Database: 269.23.8/1415 - Release Date:
> 5/5/2008 6:01 AM
> >
>
>
>
>
>
>
>
--------------------------------------------------------------------------------
>
>
> No virus found in this incoming message.
> Checked by AVG.
> Version: 7.5.524 / Virus Database: 269.23.8/1415 - Release Date:
5/5/2008 6:01 AM
>

Hi everybody !

Thanks for all your posts and support in this forum, because of it i
have my WML11B working flawless, with itīs new firmware version 2.3.5
that i found here, i am getting all radio lists updates in no time!!

The only thing i cannot acces since firmware update is the web browser,
as everybody knows it will ask you for a username "admin" and
password "blank" or in some cases (my case) "admin" again, well they
did not work, i canīt pass through and offcurse canīt get in to the
deviceīs configuration web page, does anybody knows if this new
firmware has a different username and password?

by the way i saw a firmware named ver 2.3.6, but as i found no comments
about it, i choose to use the ver 2.3.5 that every body loves, even in
the linksys forum, any body try it yet?

Thanks and Best Regards

Luis

Hello,

This email message is a notification to let you know that
a file has been uploaded to the Files area of the wmls11b
group.

   File        : /WMLS11B-DS-Rev_NC.pdf
   Uploaded by : djringjr <n1ea@...>
   Description : WLMS11B Data Sheet

You can access this file at the URL:
http://groups.yahoo.com/group/wmls11b/files/WMLS11B-DS-Rev_NC.pdf

To learn more about file sharing for your group, please visit:
http://help.yahoo.com/l/us/yahoo/groups/original/members/web/index.htmlfiles

Regards,

djringjr <n1ea@...>

I am running 2.3.6 with no problems, but if 2.3.5 works well keep it.
Unfortunately there is a danger of your unit not working if the
firmware flash fails:  Your WMLS11B will be turned into a "brick" -
just a paperweight - it won't work anymore if the firmware flash
fails, so keep it as you have it as long as it works - which is
standard firmware advice.  If it works fine, don't flash the firmware!

In the FILES section of this group, you will find the Quick Install
Guide, Data Sheet, and User's Guide for the WMLS11B.  The information
you seek is in the User's Guide.

Here is the link for the files section:
http://tech.groups.yahoo.com/group/wmls11b/files
What you want is:
WML11B_WMLS11B-UG-Rev_NC+web.pdf
WMLS11B Users Guide

Best wishes,

David Ring




On Tue, May 6, 2008 at 4:27 AM, aaluis78 <aaluis78@...> wrote:
> Hi everybody !
>
>  Thanks for all your posts and support in this forum, because of it i
>  have my WML11B working flawless, with itīs new firmware version 2.3.5
>  that i found here, i am getting all radio lists updates in no time!!
>
>  The only thing i cannot acces since firmware update is the web browser,
>  as everybody knows it will ask you for a username "admin" and
>  password "blank" or in some cases (my case) "admin" again, well they
>  did not work, i canīt pass through and offcurse canīt get in to the
>  deviceīs configuration web page, does anybody knows if this new
>  firmware has a different username and password?
>
>  by the way i saw a firmware named ver 2.3.6, but as i found no comments
>  about it, i choose to use the ver 2.3.5 that every body loves, even in
>  the linksys forum, any body try it yet?
>
>  Thanks and Best Regards
>
>  Luis
>
>
>  ------------------------------------
>
>  Yahoo! Groups Links
>
>
>
>

The information that you are looking for is listed in the "Users
Guide" which is available in the files section of this group.  The
information is in chapter 7 under the section "Log in".  Please note
that due to unnumbered pages in the PDF, you have to go to a higher
page number in the PDF than in the printed booklet.

I hope this helps.

David



On Tue, May 6, 2008 at 4:27 AM, aaluis78 <aaluis78@...> wrote:
> Hi everybody !
>
>  Thanks for all your posts and support in this forum, because of it i
>  have my WML11B working flawless, with itīs new firmware version 2.3.5
>  that i found here, i am getting all radio lists updates in no time!!
>
>  The only thing i cannot acces since firmware update is the web browser,
>  as everybody knows it will ask you for a username "admin" and
>  password "blank" or in some cases (my case) "admin" again, well they
>  did not work, i canīt pass through and offcurse canīt get in to the
>  deviceīs configuration web page, does anybody knows if this new
>  firmware has a different username and password?
>
>  by the way i saw a firmware named ver 2.3.6, but as i found no comments
>  about it, i choose to use the ver 2.3.5 that every body loves, even in
>  the linksys forum, any body try it yet?
>
>  Thanks and Best Regards
>
>  Luis
>
>
>  ------------------------------------
>
>  Yahoo! Groups Links
>
>
>
>

My son was having trouble with his internet connection. It seems that
when he performed ipconfig /release he was unable to renew. after alot
of trial and testing we found that he directly assigned an ip address
   this got him on the network but not on the internet. He neglected to
specify a default gateway in tcp/ip configuration. That got him on the
web. After this I went to bed. When my head hit the pillow the wmls11b
problem popped into my head. Next thought maybe this is the problem .
I specified an ip address unchecked auto assign and specified a
default gateway and UP SHE WAS!  All is well. Thanks to all for being
a sounding board and helping. Jim


--- In wmls11b@yahoogroups.com, "jlt1224" <jlt1224@...> wrote:
>
>
> Thanks Gary I'll try to be patient
> Regards, Jim
>
>
>
> --- In wmls11b@yahoogroups.com, "Gary Fisher" <gafisher@> wrote:
> >
> > Jim,
> >
> > The Super Service station list will activate with your next update,
> whether manual or automatic, but since updating is where you're having
> trouble that'll have to be dealt with first.  If you don't hear from
> them today or tomorrow email them again in case your first note didn't
> get through; my experience is that they respond quickly but tech
> support might get weekends off for good behavior.  <s>
> >
> > Gary
> >
> >
> >
> >
> > From: jlt1224
> > Sent: Monday, May 05, 2008 2:01 PM
> > To: wmls11b@yahoogroups.com
> > Subject: [wmls11b] Re: bought super vtuner subscription. still can't
> update
> >
> >
> > Yes I can log in I regestered 6-8 months ago. I just signed up for the
> > super vtuner subscription friday. Is there a waiting period or is it
> > instant? I have set up music directories and selected several
> > stations. I checked to see that the mac # was correct and it is. every
> > thing looks like it should work, but it doesn't i'm at a loss ???
> >
> > --- In wmls11b@yahoogroups.com, "Gary Fisher" <gafisher@> wrote:
> > >
> > > Hi, Jim!
> > >
> > > >> "... no reply since saturday?"
> > >
> > > Give them another day or two, but LinksysRadio support has always
> > been very good when I've contacted them.
> > >
> > > Are you able to log in to your account at
> > http://www.linksysradio.com using your registered email address and
> > password?
> > >
> > > All the best,
> > >
> > > Gary
> > >
> > >
> > >
> > > Find the work you'll LOVE!
> > >
> > >
> > > From: jlt1224
> > > Sent: Monday, May 05, 2008 1:19 PM
> > > To: wmls11b@yahoogroups.com
> > > Subject: [wmls11b] Re: bought super vtuner subscription. still can't
> > update
> > >
> > >
> > > I am using it wireless it says the signal strength is excellent. It
> > > was working until I started the update saga. I emailed them no reply
> > > since saturday?
> > >
> > > --- In wmls11b@yahoogroups.com, "David Ring" <n1ea@> wrote:
> > > >
> > > > Do you have the WMLS11B connected directly? If not, check
"network"
> > > > to see the signal strength of the wireless connection.
> > > >
> > > > Since you are a subscriber, you can contact linksysradio.com
via web
> > > email:
> > > >
http://www.linksysradio.com/setupapp/linksys1/asp/Help/SSComment.asp
> > > >
> > > > Best
> > > >
> > > > David
> > > >
> > > > On Tue, May 6, 2008 at 12:52 AM, jlt1224 <jlt1224@> wrote:
> > > > > A little background info . I purchased my wmls11b 6 or 8 months
> > > ago. I
> > > > > updated the Bios to version 2.3.6 and it ran fine with trial
> > > > > subscription. Slowly stations started not to connect. I
> guessed they
> > > > > changed ip address?? I still had 2 or 3 stations that
worked. So I
> > > > > deceided to sign up for the subscription saw a link for a deal
> > > $19.95.
> > > > > My Problem I can not update manually or automatic. Error message
> > > > > update failed. I followed the instructions on this forums
post>>>
> > > > >
> > > > > >.On 6/23/07, Earl Bullock <deskjett6@> wrote: If you take
> > > > > >a pin or pencil point and push in the "reset button" to the
> > right of
> > > > > >your RCA speaker connections that should resolve both
issues. You
> > > > > >will then be able to manually update your radio stations
and play
> > > > > >them. I think the problem is when you update your firmware
> without
> > > > > >resetting, your radio will still play the radios stations but
> will
> > > > > >not allow you to update. I simulated your problem and did the
> > above.
> > > > > >It worked for me. Give it a try!
> > > > >
> > > > > No Good Can some one help me please. After the reset I lost my
> > > > > favorites no suprise there and the Date for the Station list now
> > > reads
> > > > > "EMPTY".
> > > > >
> > > > > Thanks in advance, Jim
> > > > >
> > > > >
> > > > > ------------------------------------
> > > > >
> > > > > Yahoo! Groups Links
> > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > ----------------------------------------------------------
> > >
> > >
> > > No virus found in this incoming message.
> > > Checked by AVG.
> > > Version: 7.5.524 / Virus Database: 269.23.8/1415 - Release Date:
> > 5/5/2008 6:01 AM
> > >
> >
> >
> >
> >
> >
> >
> >
>
--------------------------------------------------------------------------------
> >
> >
> > No virus found in this incoming message.
> > Checked by AVG.
> > Version: 7.5.524 / Virus Database: 269.23.8/1415 - Release Date:
> 5/5/2008 6:01 AM
> >
>

Maybe my unit is different but on mine username is blank and the
password is "admin" try this it may help. Regards, Jim



--- In wmls11b@yahoogroups.com, "aaluis78" <aaluis78@...> wrote:
>
> Hi everybody !
>
> Thanks for all your posts and support in this forum, because of it i
> have my WML11B working flawless, with itīs new firmware version 2.3.5
> that i found here, i am getting all radio lists updates in no time!!
>
> The only thing i cannot acces since firmware update is the web browser,
> as everybody knows it will ask you for a username "admin" and
> password "blank" or in some cases (my case) "admin" again, well they
> did not work, i canīt pass through and offcurse canīt get in to the
> deviceīs configuration web page, does anybody knows if this new
> firmware has a different username and password?
>
> by the way i saw a firmware named ver 2.3.6, but as i found no comments
> about it, i choose to use the ver 2.3.5 that every body loves, even in
> the linksys forum, any body try it yet?
>
> Thanks and Best Regards
>
> Luis
>

That's what mine is and that's  what's in the well indexed User's
Guide.  So in case he didn't have one, I gave him the links to the one
on the Files section of this group, and I sent him the place on the
index in a private email.  I hope he got the Users Guide first!  It is
good to read the book if you have it :-)

David


On Tue, May 6, 2008 at 8:10 AM, jlt1224 <jlt1224@...> wrote:
>    Maybe my unit is different but on mine username is blank and the
>  password is "admin" try this it may help. Regards, Jim

After exhausting all other sources READ the BOOK ;-)


--- In wmls11b@yahoogroups.com, "David Ring" <n1ea@...> wrote:
>
> That's what mine is and that's  what's in the well indexed User's
> Guide.  So in case he didn't have one, I gave him the links to the one
> on the Files section of this group, and I sent him the place on the
> index in a private email.  I hope he got the Users Guide first!  It is
> good to read the book if you have it :-)
>
> David
>
>
> On Tue, May 6, 2008 at 8:10 AM, jlt1224 <jlt1224@...> wrote:
> >    Maybe my unit is different but on mine username is blank and the
> >  password is "admin" try this it may help. Regards, Jim
>

The User's Manual, Data Sheet and Quick Start Guide are also in this
groups "Files" section for those who have no printed copies to read.
Just remember, the page numbers in PDF are lower than the one cited in
the index, so add about 5 pages to the PDF page, and you'll be very
close.

Best
David

On Tue, May 6, 2008 at 1:25 PM, Brad Johnson <BradJohnson2@...> wrote:
>
>  I believe the acronym you are looking for is RTFM.  ;-)  Of course you
> actually need to have the manual in order to read it, but I believe it's on
> the CD.
>
> Note that you need to use Firefox as the browser (not IE) if you want to
> edit the favorites through the WMLS11B web server.
>
> -Brad
>
>

--- In wmls11b@yahoogroups.com, "jlt1224" <jlt1224@...> wrote:
>
>    Maybe my unit is different but on mine username is blank and the
> password is "admin" try this it may help. Regards, Jim
>


Jim, you were right, I appologize, I had everything backwards!!

After getting in to the settings page, i tried to make some changes but
every time i click on apply, i receive a blank webpage, if i press
refresh, i get the changes succesfull saved page, but when i got
redirected to settings page again, no chages have been done, any idea
what is going on??

--- In wmls11b@yahoogroups.com, "David Ring" <n1ea@...> wrote:
>
> That's what mine is and that's  what's in the well indexed User's
> Guide.  So in case he didn't have one, I gave him the links to the one
> on the Files section of this group, and I sent him the place on the
> index in a private email.  I hope he got the Users Guide first!  It is
> good to read the book if you have it :-)
>
> David
>
>
> On Tue, May 6, 2008 at 8:10 AM, jlt1224 <jlt1224@...> wrote:
> >    Maybe my unit is different but on mine username is blank and the
> >  password is "admin" try this it may help. Regards, Jim
>

I appologize youre right!!! thanks for your help!!

--- In wmls11b@yahoogroups.com, "Brad Johnson" <BradJohnson2@...>
wrote:
>
> I believe the acronym you are looking for is RTFM.  ;-)  Of course
you
> actually need to have the manual in order to read it, but I believe
it's on
> the CD.
>
> Note that you need to use Firefox as the browser (not IE) if you
want to
> edit the favorites through the WMLS11B web server.
>
> -Brad
>
>
> On Tue, May 6, 2008 at 12:07 PM, jlt1224 <jlt1224@...> wrote:
>
> >    After exhausting all other sources READ the BOOK ;-)
> >
> >
> > --- In wmls11b@yahoogroups.com <wmls11b%
40yahoogroups.com>, "David Ring"
> > <n1ea@> wrote:
> > >
> > > That's what mine is and that's what's in the well indexed User's
> > > Guide. So in case he didn't have one, I gave him the links to
the one
> > > on the Files section of this group, and I sent him the place on
the
> > > index in a private email. I hope he got the Users Guide first!
It is
> > > good to read the book if you have it :-)
> > >
> > > David
> > >
> > >
> > > On Tue, May 6, 2008 at 8:10 AM, jlt1224 <jlt1224@> wrote:
> > > > Maybe my unit is different but on mine username is blank and
the
> > > > password is "admin" try this it may help. Regards, Jim
> > >
> >
> >
>
I appologize youre right!!! thanks for your help!!

--- In wmls11b@yahoogroups.com, "David Ring" <n1ea@...> wrote:
>
> The User's Manual, Data Sheet and Quick Start Guide are also in this
> groups "Files" section for those who have no printed copies to read.
> Just remember, the page numbers in PDF are lower than the one cited
in
> the index, so add about 5 pages to the PDF page, and you'll be very
> close.
>
> Best
> David
>
> On Tue, May 6, 2008 at 1:25 PM, Brad Johnson <BradJohnson2@...>
wrote:
> >
> >  I believe the acronym you are looking for is RTFM.  ;-)  Of
course you
> > actually need to have the manual in order to read it, but I
believe it's on
> > the CD.
> >
> > Note that you need to use Firefox as the browser (not IE) if you
want to
> > edit the favorites through the WMLS11B web server.
> >
> > -Brad
> >
> >
I appologize youre right!!! thanks for your help!!

I am trying to set up a borrowed wmls11b, but running into one big
problem.

I use WEP encryption on my router. The password is in ASCII format.
However, the wmls11b wants me to enter the password in hex format. Is
there a way to convert from ASCII to hex. I've been doing some
searching, but the sites I've come across don't convert to any hex
that I'm familiar with (not that I'm that familiar with hex...), which
is to say the characters 0-9 and a-f. I'm also looked through a couple
of pdf files from this group, but haven't found a solution.

The unit works fine wired directly to the router, but I'd really like
to get it connected wirelessly. Thanks to anyone who can help.

Thanks for the site. I went there and followed your directions. The
unit accepted the hex number. It's connected to the network and has a
DHCP-generated IP address, but when I attempt to play a station, the
display sits on "Connecting." I'm not sure what the problem is, but
I'll play with the settings and hope I stumble across a solution. If
you have any ideas, they would be welcome. Again, thanks.

--- In wmls11b@yahoogroups.com, "Gary Fisher" <gafisher@...> wrote:
>
> Hi, Peter!
>
> Here's a quick ASCII-Hex convertor:
http://centricle.com/tools/ascii-hex/
>
> Enter your ASCII key, make sure the convertor is in ASCII-to-Hex
mode, and click Translate.  The Hex key will come back as 2-character
groups separated by percent signs; just drop the percent signs to get
the actual key.  For instance, "PaSsWoRd" converts to
"%50%61%53%73%57%6f%52%64" which becomes "50615373576f5264" when you
remove the % signs.
>
> Note that each ASCII character becomes two Hex characters, and a Hex
WEP key has to be either 10 or 26 characters, so your ASCII key will
have to be either 5 or 13 characters long.  Also, Hex WEP keys usually
have to start with 0x so in the example it would be entered as
"0x50615373576f5264" on the WMLS11B (the 0x does not count as part of
the 10 or 26 characters.).  It's possible the WMLS11B appends the 0x
automatically, so if it doesn't work one way try the other.
>
> I hope that helps!
>
> Gary