https://twitter.com/#!/SteveGunn5
and yes
metarskyweb 1
metarairport K1P1
metarvis 1
metarskydesc Sky:
metarvisdesc Vis:
uselocalfirst 1
trimend 1
showerrors 0
round 1
test 0


--- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@...> wrote:
>
> And make sure you have the METAR things set to 1 in the wuhutweet.cfg file.
>
> On Sun, Jun 3, 2012 at 10:38 AM, Don Lafferty <don@...> wrote:
>
> > What's your Twitter URL?
> >
> >
> > On Sun, Jun 3, 2012 at 10:21 AM, KNHBRIST1 <steve_03222@...> wrote:
> >
> >> **
> >>
> >>
> >> That airport is in TN, I am in NH. I tried K1P1 which is the code no
> >> luck. I know it is available as I use it for YoWindow. I get this:
> >> 13:20|<metarsky></metarsky>|<metarweather></metarweather>|Temp: 58.5
> >> °F|Hum: 69.0 Pres 29.74 "|24Hr Rain 1.26 " |Winds SE 1.5 MPH
> >>
> >> I am using this in WUHU copied and pasted from Manual
> >> WUHU_Tweet.exe
> >>
"%TimeHHMM%|<metarsky>%MetarSkyConditions%</metarsky>|<metarweather>%MetarWeathe\
rConditions%</metarweather>|Temp:
> >> %OutdoorTempDegF% °F|Hum: %OutdoorHumidity% %|Pres
> >> %OutdoorPressureRelativeINHG% "|24Hr Rain %OutdoorRain24HrIN% "|Winds
> >> %OutdoorWindDirectionLetters% %OutdoorWindAverageSpeedMPH% MPH|Windchill:
> >> %OutdoorWindchillF% °F"
> >>
> >>
> >> --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@> wrote:
> >> >
> >> > Looks like KTRI should be the closest METAR to you. It's an airport near
> >> > Bristol.
> >> >
> >> >
> >> > On Sun, Jun 3, 2012 at 9:59 AM, KNHBRIST1 <steve_03222@> wrote:
> >> >
> >> > > **
> >>
> >> > >
> >> > >
> >> > > Don, thanks for your help I will read further and play around with it.
> >> > > Again, I appreciate your assistance.
> >> > > Steve
> >> > >
> >> > >
> >> > >
> >> >
> >> >
> >> >
> >> > --
> >> > The day Microsoft starts making vacuum cleaners is the day they start
> >> > making something that doesn't suck.
> >> >
> >>
> >>
> >>
> >
> >
> >
> > --
> > The day Microsoft starts making vacuum cleaners is the day they start
> > making something that doesn't suck.
> >
>
>
>
> --
> The day Microsoft starts making vacuum cleaners is the day they start
> making something that doesn't suck.
>

Yes it does:
14:55|<metarsky></metarsky>|<metarweather></metarweather>|Temp: 60.3 °F|Hum:
67.0 Pres 29.71 "|24Hr Rain 1.06 " |Winds SW 4.5 MPH

Using:
metarskyweb 1
metarairport VNY
metarvis 1
metarskydesc Sky:
metarvisdesc Vis:
uselocalfirst 1
trimend 1
showerrors 0
round 1
test 0


--- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@...> wrote:
>
> What happens if you put in a known good airport code like VNY?  That's the
> one I use which is Van Nuys in Los Angeles.  Try that and see if it still
> does the same thing.
>
> On Sun, Jun 3, 2012 at 10:44 AM, KNHBRIST1 <steve_03222@...> wrote:
>
> > **
> >
> >
> > https://twitter.com/#!/SteveGunn5
> > and yes
> > metarskyweb 1
> > metarairport K1P1
> > metarvis 1
> > metarskydesc Sky:
> > metarvisdesc Vis:
> > uselocalfirst 1
> > trimend 1
> > showerrors 0
> > round 1
> > test 0
> >
> >
> > --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@> wrote:
> > >
> > > And make sure you have the METAR things set to 1 in the wuhutweet.cfg
> > file.
> > >
> > > On Sun, Jun 3, 2012 at 10:38 AM, Don Lafferty <don@> wrote:
> > >
> > > > What's your Twitter URL?
> > > >
> > > >
> > > > On Sun, Jun 3, 2012 at 10:21 AM, KNHBRIST1 <steve_03222@> wrote:
> > > >
> > > >> **
> >
> > > >>
> > > >>
> > > >> That airport is in TN, I am in NH. I tried K1P1 which is the code no
> > > >> luck. I know it is available as I use it for YoWindow. I get this:
> > > >> 13:20|<metarsky></metarsky>|<metarweather></metarweather>|Temp: 58.5
> > > >> °F|Hum: 69.0 Pres 29.74 "|24Hr Rain 1.26 " |Winds SE 1.5 MPH
> > > >>
> > > >> I am using this in WUHU copied and pasted from Manual
> > > >> WUHU_Tweet.exe
> > > >>
> >
"%TimeHHMM%|<metarsky>%MetarSkyConditions%</metarsky>|<metarweather>%MetarWeathe\
rConditions%</metarweather>|Temp:
> > > >> %OutdoorTempDegF% °F|Hum: %OutdoorHumidity% %|Pres
> > > >> %OutdoorPressureRelativeINHG% "|24Hr Rain %OutdoorRain24HrIN% "|Winds
> > > >> %OutdoorWindDirectionLetters% %OutdoorWindAverageSpeedMPH%
> > MPH|Windchill:
> > > >> %OutdoorWindchillF% °F"
> > > >>
> > > >>
> > > >> --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@>
> > wrote:
> > > >> >
> > > >> > Looks like KTRI should be the closest METAR to you. It's an airport
> > near
> > > >> > Bristol.
> > > >> >
> > > >> >
> > > >> > On Sun, Jun 3, 2012 at 9:59 AM, KNHBRIST1 <steve_03222@> wrote:
> > > >> >
> > > >> > > **
> > > >>
> > > >> > >
> > > >> > >
> > > >> > > Don, thanks for your help I will read further and play around
> > with it.
> > > >> > > Again, I appreciate your assistance.
> > > >> > > Steve
> > > >> > >
> > > >> > >
> > > >> > >
> > > >> >
> > > >> >
> > > >> >
> > > >> > --
> > > >> > The day Microsoft starts making vacuum cleaners is the day they
> > start
> > > >> > making something that doesn't suck.
> > > >> >
> > > >>
> > > >>
> > > >>
> > > >
> > > >
> > > >
> > > > --
> > > > The day Microsoft starts making vacuum cleaners is the day they start
> > > > making something that doesn't suck.
> > > >
> > >
> > >
> > >
> > > --
> > > The day Microsoft starts making vacuum cleaners is the day they start
> > > making something that doesn't suck.
> > >
> >
> >
> >
>
>
>
> --
> The day Microsoft starts making vacuum cleaners is the day they start
> making something that doesn't suck.
>

Yes they are checked.

--- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@...> wrote:
>
> And then in WUHU under General Settings you might need to make sure you
> have Write curdat.lst and Write Extended Data.  Not sure about those but I
> suspect they are needed.
>
>
> On Sun, Jun 3, 2012 at 11:57 AM, KNHBRIST1 <steve_03222@...> wrote:
>
> > **
> >
> >
> > Yes it does:
> > 14:55|<metarsky></metarsky>|<metarweather></metarweather>|Temp: 60.3
> > °F|Hum: 67.0 Pres 29.71 "|24Hr Rain 1.06 " |Winds SW 4.5 MPH
> >
> > Using:
> > metarskyweb 1
> > metarairport VNY
> >
> > metarvis 1
> > metarskydesc Sky:
> > metarvisdesc Vis:
> > uselocalfirst 1
> > trimend 1
> > showerrors 0
> > round 1
> > test 0
> >
> > --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@> wrote:
> > >
> > > What happens if you put in a known good airport code like VNY? That's the
> > > one I use which is Van Nuys in Los Angeles. Try that and see if it still
> > > does the same thing.
> > >
> > > On Sun, Jun 3, 2012 at 10:44 AM, KNHBRIST1 <steve_03222@> wrote:
> > >
> > > > **
> >
> > > >
> > > >
> > > > https://twitter.com/#!/SteveGunn5
> > > > and yes
> > > > metarskyweb 1
> > > > metarairport K1P1
> > > > metarvis 1
> > > > metarskydesc Sky:
> > > > metarvisdesc Vis:
> > > > uselocalfirst 1
> > > > trimend 1
> > > > showerrors 0
> > > > round 1
> > > > test 0
> > > >
> > > >
> > > > --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@> wrote:
> > > > >
> > > > > And make sure you have the METAR things set to 1 in the wuhutweet.cfg
> > > > file.
> > > > >
> > > > > On Sun, Jun 3, 2012 at 10:38 AM, Don Lafferty <don@> wrote:
> > > > >
> > > > > > What's your Twitter URL?
> > > > > >
> > > > > >
> > > > > > On Sun, Jun 3, 2012 at 10:21 AM, KNHBRIST1 <steve_03222@> wrote:
> > > > > >
> > > > > >> **
> > > >
> > > > > >>
> > > > > >>
> > > > > >> That airport is in TN, I am in NH. I tried K1P1 which is the code
> > no
> > > > > >> luck. I know it is available as I use it for YoWindow. I get this:
> > > > > >> 13:20|<metarsky></metarsky>|<metarweather></metarweather>|Temp:
> > 58.5
> > > > > >> °F|Hum: 69.0 Pres 29.74 "|24Hr Rain 1.26 " |Winds SE 1.5 MPH
> > > > > >>
> > > > > >> I am using this in WUHU copied and pasted from Manual
> > > > > >> WUHU_Tweet.exe
> > > > > >>
> > > >
> >
"%TimeHHMM%|<metarsky>%MetarSkyConditions%</metarsky>|<metarweather>%MetarWeathe\
rConditions%</metarweather>|Temp:
> > > > > >> %OutdoorTempDegF% °F|Hum: %OutdoorHumidity% %|Pres
> > > > > >> %OutdoorPressureRelativeINHG% "|24Hr Rain %OutdoorRain24HrIN%
> > "|Winds
> > > > > >> %OutdoorWindDirectionLetters% %OutdoorWindAverageSpeedMPH%
> > > > MPH|Windchill:
> > > > > >> %OutdoorWindchillF% °F"
> > > > > >>
> > > > > >>
> > > > > >> --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@>
> > > > wrote:
> > > > > >> >
> > > > > >> > Looks like KTRI should be the closest METAR to you. It's an
> > airport
> > > > near
> > > > > >> > Bristol.
> > > > > >> >
> > > > > >> >
> > > > > >> > On Sun, Jun 3, 2012 at 9:59 AM, KNHBRIST1 <steve_03222@> wrote:
> > > > > >> >
> > > > > >> > > **
> > > > > >>
> > > > > >> > >
> > > > > >> > >
> > > > > >> > > Don, thanks for your help I will read further and play around
> > > > with it.
> > > > > >> > > Again, I appreciate your assistance.
> > > > > >> > > Steve
> > > > > >> > >
> > > > > >> > >
> > > > > >> > >
> > > > > >> >
> > > > > >> >
> > > > > >> >
> > > > > >> > --
> > > > > >> > The day Microsoft starts making vacuum cleaners is the day they
> > > > start
> > > > > >> > making something that doesn't suck.
> > > > > >> >
> > > > > >>
> > > > > >>
> > > > > >>
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > The day Microsoft starts making vacuum cleaners is the day they
> > start
> > > > > > making something that doesn't suck.
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > The day Microsoft starts making vacuum cleaners is the day they start
> > > > > making something that doesn't suck.
> > > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > --
> > > The day Microsoft starts making vacuum cleaners is the day they start
> > > making something that doesn't suck.
> > >
> >
> >
> >
>
>
>
> --
> The day Microsoft starts making vacuum cleaners is the day they start
> making something that doesn't suck.
>

Yes strange.....All else is working well just can not pick up the airport Metar.
I played around and have the Monthly Rain total and added Wind gust.
I just can not seem to get rid of a " at the end of of the string.
It ends with Wind Gust 0.0"
I have taken out the" and it still shows up...LOL
Thanks again for making this available and to John for providing the manual so
that even I can get this mostly set up.
And I think I have all the correct files in the folder.

Steve

--- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@...> wrote:
>
> All I can think of now is make sure you have everything in your WUHU
> folder.  That would include the .cfg file.
>
>
> On Sun, Jun 3, 2012 at 12:20 PM, KNHBRIST1 <steve_03222@...> wrote:
>
> > **
> >
> >
> > Yes they are checked.
> >
> >
> > --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@> wrote:
> > >
> > > And then in WUHU under General Settings you might need to make sure you
> > > have Write curdat.lst and Write Extended Data. Not sure about those but I
> > > suspect they are needed.
> > >
> > >
> > > On Sun, Jun 3, 2012 at 11:57 AM, KNHBRIST1 <steve_03222@> wrote:
> > >
> > > > **
> >
> > > >
> > > >
> > > > Yes it does:
> > > > 14:55|<metarsky></metarsky>|<metarweather></metarweather>|Temp: 60.3
> > > > °F|Hum: 67.0 Pres 29.71 "|24Hr Rain 1.06 " |Winds SW 4.5 MPH
> > > >
> > > > Using:
> > > > metarskyweb 1
> > > > metarairport VNY
> > > >
> > > > metarvis 1
> > > > metarskydesc Sky:
> > > > metarvisdesc Vis:
> > > > uselocalfirst 1
> > > > trimend 1
> > > > showerrors 0
> > > > round 1
> > > > test 0
> > > >
> > > > --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@> wrote:
> > > > >
> > > > > What happens if you put in a known good airport code like VNY?
> > That's the
> > > > > one I use which is Van Nuys in Los Angeles. Try that and see if it
> > still
> > > > > does the same thing.
> > > > >
> > > > > On Sun, Jun 3, 2012 at 10:44 AM, KNHBRIST1 <steve_03222@> wrote:
> > > > >
> > > > > > **
> > > >
> > > > > >
> > > > > >
> > > > > > https://twitter.com/#!/SteveGunn5
> > > > > > and yes
> > > > > > metarskyweb 1
> > > > > > metarairport K1P1
> > > > > > metarvis 1
> > > > > > metarskydesc Sky:
> > > > > > metarvisdesc Vis:
> > > > > > uselocalfirst 1
> > > > > > trimend 1
> > > > > > showerrors 0
> > > > > > round 1
> > > > > > test 0
> > > > > >
> > > > > >
> > > > > > --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@>
> > wrote:
> > > > > > >
> > > > > > > And make sure you have the METAR things set to 1 in the
> > wuhutweet.cfg
> > > > > > file.
> > > > > > >
> > > > > > > On Sun, Jun 3, 2012 at 10:38 AM, Don Lafferty <don@> wrote:
> > > > > > >
> > > > > > > > What's your Twitter URL?
> > > > > > > >
> > > > > > > >
> > > > > > > > On Sun, Jun 3, 2012 at 10:21 AM, KNHBRIST1 <steve_03222@>
> > wrote:
> > > > > > > >
> > > > > > > >> **
> > > > > >
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> That airport is in TN, I am in NH. I tried K1P1 which is the
> > code
> > > > no
> > > > > > > >> luck. I know it is available as I use it for YoWindow. I get
> > this:
> > > > > > > >>
> > 13:20|<metarsky></metarsky>|<metarweather></metarweather>|Temp:
> > > > 58.5
> > > > > > > >> °F|Hum: 69.0 Pres 29.74 "|24Hr Rain 1.26 " |Winds SE 1.5 MPH
> > > > > > > >>
> > > > > > > >> I am using this in WUHU copied and pasted from Manual
> > > > > > > >> WUHU_Tweet.exe
> > > > > > > >>
> > > > > >
> > > >
> >
"%TimeHHMM%|<metarsky>%MetarSkyConditions%</metarsky>|<metarweather>%MetarWeathe\
rConditions%</metarweather>|Temp:
> > > > > > > >> %OutdoorTempDegF% °F|Hum: %OutdoorHumidity% %|Pres
> > > > > > > >> %OutdoorPressureRelativeINHG% "|24Hr Rain %OutdoorRain24HrIN%
> > > > "|Winds
> > > > > > > >> %OutdoorWindDirectionLetters% %OutdoorWindAverageSpeedMPH%
> > > > > > MPH|Windchill:
> > > > > > > >> %OutdoorWindchillF% °F"
> > > > > > > >>
> > > > > > > >>
> > > > > > > >> --- In wuhu_software_group@yahoogroups.com, Don Lafferty
> > <don@>
> > > > > > wrote:
> > > > > > > >> >
> > > > > > > >> > Looks like KTRI should be the closest METAR to you. It's an
> > > > airport
> > > > > > near
> > > > > > > >> > Bristol.
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > On Sun, Jun 3, 2012 at 9:59 AM, KNHBRIST1 <steve_03222@>
> > wrote:
> > > > > > > >> >
> > > > > > > >> > > **
> > > > > > > >>
> > > > > > > >> > >
> > > > > > > >> > >
> > > > > > > >> > > Don, thanks for your help I will read further and play
> > around
> > > > > > with it.
> > > > > > > >> > > Again, I appreciate your assistance.
> > > > > > > >> > > Steve
> > > > > > > >> > >
> > > > > > > >> > >
> > > > > > > >> > >
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> >
> > > > > > > >> > --
> > > > > > > >> > The day Microsoft starts making vacuum cleaners is the day
> > they
> > > > > > start
> > > > > > > >> > making something that doesn't suck.
> > > > > > > >> >
> > > > > > > >>
> > > > > > > >>
> > > > > > > >>
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > The day Microsoft starts making vacuum cleaners is the day they
> > > > start
> > > > > > > > making something that doesn't suck.
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > > > --
> > > > > > > The day Microsoft starts making vacuum cleaners is the day they
> > start
> > > > > > > making something that doesn't suck.
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > >
> > > > >
> > > > >
> > > > > --
> > > > > The day Microsoft starts making vacuum cleaners is the day they start
> > > > > making something that doesn't suck.
> > > > >
> > > >
> > > >
> > > >
> > >
> > >
> > >
> > > --
> > > The day Microsoft starts making vacuum cleaners is the day they start
> > > making something that doesn't suck.
> > >
> >
> >
> >
>
>
>
> --
> The day Microsoft starts making vacuum cleaners is the day they start
> making something that doesn't suck.
>

I am still wondering if the string in th emanual is correct, as the two strings
in th eadvanced section for metar and metar from airport seem to be exactly the
same.
Steve

--- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@...> wrote:
>
> Yes strange.....All else is working well just can not pick up the airport
Metar.
> I played around and have the Monthly Rain total and added Wind gust.
> I just can not seem to get rid of a " at the end of of the string.
> It ends with Wind Gust 0.0"
> I have taken out the" and it still shows up...LOL
> Thanks again for making this available and to John for providing the manual so
that even I can get this mostly set up.
> And I think I have all the correct files in the folder.
>
> Steve
>
> --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@> wrote:
> >
> > All I can think of now is make sure you have everything in your WUHU
> > folder.  That would include the .cfg file.
> >
> >
> > On Sun, Jun 3, 2012 at 12:20 PM, KNHBRIST1 <steve_03222@> wrote:
> >
> > > **
> > >
> > >
> > > Yes they are checked.
> > >
> > >
> > > --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@> wrote:
> > > >
> > > > And then in WUHU under General Settings you might need to make sure you
> > > > have Write curdat.lst and Write Extended Data. Not sure about those but
I
> > > > suspect they are needed.
> > > >
> > > >
> > > > On Sun, Jun 3, 2012 at 11:57 AM, KNHBRIST1 <steve_03222@> wrote:
> > > >
> > > > > **
> > >
> > > > >
> > > > >
> > > > > Yes it does:
> > > > > 14:55|<metarsky></metarsky>|<metarweather></metarweather>|Temp: 60.3
> > > > > °F|Hum: 67.0 Pres 29.71 "|24Hr Rain 1.06 " |Winds SW 4.5 MPH
> > > > >
> > > > > Using:
> > > > > metarskyweb 1
> > > > > metarairport VNY
> > > > >
> > > > > metarvis 1
> > > > > metarskydesc Sky:
> > > > > metarvisdesc Vis:
> > > > > uselocalfirst 1
> > > > > trimend 1
> > > > > showerrors 0
> > > > > round 1
> > > > > test 0
> > > > >
> > > > > --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@> wrote:
> > > > > >
> > > > > > What happens if you put in a known good airport code like VNY?
> > > That's the
> > > > > > one I use which is Van Nuys in Los Angeles. Try that and see if it
> > > still
> > > > > > does the same thing.
> > > > > >
> > > > > > On Sun, Jun 3, 2012 at 10:44 AM, KNHBRIST1 <steve_03222@> wrote:
> > > > > >
> > > > > > > **
> > > > >
> > > > > > >
> > > > > > >
> > > > > > > https://twitter.com/#!/SteveGunn5
> > > > > > > and yes
> > > > > > > metarskyweb 1
> > > > > > > metarairport K1P1
> > > > > > > metarvis 1
> > > > > > > metarskydesc Sky:
> > > > > > > metarvisdesc Vis:
> > > > > > > uselocalfirst 1
> > > > > > > trimend 1
> > > > > > > showerrors 0
> > > > > > > round 1
> > > > > > > test 0
> > > > > > >
> > > > > > >
> > > > > > > --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@>
> > > wrote:
> > > > > > > >
> > > > > > > > And make sure you have the METAR things set to 1 in the
> > > wuhutweet.cfg
> > > > > > > file.
> > > > > > > >
> > > > > > > > On Sun, Jun 3, 2012 at 10:38 AM, Don Lafferty <don@> wrote:
> > > > > > > >
> > > > > > > > > What's your Twitter URL?
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > On Sun, Jun 3, 2012 at 10:21 AM, KNHBRIST1 <steve_03222@>
> > > wrote:
> > > > > > > > >
> > > > > > > > >> **
> > > > > > >
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >> That airport is in TN, I am in NH. I tried K1P1 which is the
> > > code
> > > > > no
> > > > > > > > >> luck. I know it is available as I use it for YoWindow. I get
> > > this:
> > > > > > > > >>
> > > 13:20|<metarsky></metarsky>|<metarweather></metarweather>|Temp:
> > > > > 58.5
> > > > > > > > >> °F|Hum: 69.0 Pres 29.74 "|24Hr Rain 1.26 " |Winds SE 1.5 MPH
> > > > > > > > >>
> > > > > > > > >> I am using this in WUHU copied and pasted from Manual
> > > > > > > > >> WUHU_Tweet.exe
> > > > > > > > >>
> > > > > > >
> > > > >
> > >
"%TimeHHMM%|<metarsky>%MetarSkyConditions%</metarsky>|<metarweather>%MetarWeathe\
rConditions%</metarweather>|Temp:
> > > > > > > > >> %OutdoorTempDegF% °F|Hum: %OutdoorHumidity% %|Pres
> > > > > > > > >> %OutdoorPressureRelativeINHG% "|24Hr Rain %OutdoorRain24HrIN%
> > > > > "|Winds
> > > > > > > > >> %OutdoorWindDirectionLetters% %OutdoorWindAverageSpeedMPH%
> > > > > > > MPH|Windchill:
> > > > > > > > >> %OutdoorWindchillF% °F"
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >> --- In wuhu_software_group@yahoogroups.com, Don Lafferty
> > > <don@>
> > > > > > > wrote:
> > > > > > > > >> >
> > > > > > > > >> > Looks like KTRI should be the closest METAR to you. It's an
> > > > > airport
> > > > > > > near
> > > > > > > > >> > Bristol.
> > > > > > > > >> >
> > > > > > > > >> >
> > > > > > > > >> > On Sun, Jun 3, 2012 at 9:59 AM, KNHBRIST1 <steve_03222@>
> > > wrote:
> > > > > > > > >> >
> > > > > > > > >> > > **
> > > > > > > > >>
> > > > > > > > >> > >
> > > > > > > > >> > >
> > > > > > > > >> > > Don, thanks for your help I will read further and play
> > > around
> > > > > > > with it.
> > > > > > > > >> > > Again, I appreciate your assistance.
> > > > > > > > >> > > Steve
> > > > > > > > >> > >
> > > > > > > > >> > >
> > > > > > > > >> > >
> > > > > > > > >> >
> > > > > > > > >> >
> > > > > > > > >> >
> > > > > > > > >> > --
> > > > > > > > >> > The day Microsoft starts making vacuum cleaners is the day
> > > they
> > > > > > > start
> > > > > > > > >> > making something that doesn't suck.
> > > > > > > > >> >
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >>
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --
> > > > > > > > > The day Microsoft starts making vacuum cleaners is the day
they
> > > > > start
> > > > > > > > > making something that doesn't suck.
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > The day Microsoft starts making vacuum cleaners is the day they
> > > start
> > > > > > > > making something that doesn't suck.
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > The day Microsoft starts making vacuum cleaners is the day they
start
> > > > > > making something that doesn't suck.
> > > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > The day Microsoft starts making vacuum cleaners is the day they start
> > > > making something that doesn't suck.
> > > >
> > >
> > >
> > >
> >
> >
> >
> > --
> > The day Microsoft starts making vacuum cleaners is the day they start
> > making something that doesn't suck.
> >
>

Copied & pasted, changed Airport code to yours and I still get this.
21:29|<metarsky></metarsky>|<metarweather></metarweather>|Temp 55 F|Hum 73 Pres
29.7"|24Hr Rain .1"|WndSpd 0 MPH|WndDir WSW
Oh well, guess I am done trying to figure out this tonight.
Fire me off an e-mail if you have any other ideas.
Not a clue from my end, probably something easy that I just messed up...LOL
Oh and can I install th e.32 over the .030 or do I have to uninstall something?

Steve

--- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@...> wrote:
>
> Here's the one I'm using straight from my WUHU.
>
> WUHU_Tweet.exe
>
"%TimeHHMM%|<metarsky>%MetarSkyConditions%</metarsky>|<metarweather>%MetarWeathe\
rConditions%</metarweather>|Temp
> (d=0)%OutdoorTempDegF% F|Hum (d=0)%OutdoorHumidity% %|Pres
> (d=1)%OutdoorPressureRelativeINHG%"|24Hr Rain
> (d=1)%OutdoorRain24HrIN%"|WndSpd (d=0)%OutdoorWindSpeedMPH% MPH|WndDir
> %OutdoorWindDirectionLetters%|WndChll (d=0)%OutdoorWindchillF% F"
>
> Don
>
> On Sun, Jun 3, 2012 at 5:35 PM, KNHBRIST1 <steve_03222@...> wrote:
>
> > **
> >
> >
> > I am still wondering if the string in th emanual is correct, as the two
> > strings in th eadvanced section for metar and metar from airport seem to be
> > exactly the same.
> > Steve
> >
> >
> > --- In wuhu_software_group@yahoogroups.com, "KNHBRIST1" <steve_03222@>
> > wrote:
> > >
> > > Yes strange.....All else is working well just can not pick up the
> > airport Metar.
> > > I played around and have the Monthly Rain total and added Wind gust.
> > > I just can not seem to get rid of a " at the end of of the string.
> > > It ends with Wind Gust 0.0"
> > > I have taken out the" and it still shows up...LOL
> > > Thanks again for making this available and to John for providing the
> > manual so that even I can get this mostly set up.
> > > And I think I have all the correct files in the folder.
> > >
> > > Steve
> > >
> > > --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@> wrote:
> > > >
> > > > All I can think of now is make sure you have everything in your WUHU
> > > > folder. That would include the .cfg file.
> > > >
> > > >
> > > > On Sun, Jun 3, 2012 at 12:20 PM, KNHBRIST1 <steve_03222@> wrote:
> > > >
> > > > > **
> > > > >
> > > > >
> > > > > Yes they are checked.
> > > > >
> > > > >
> > > > > --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@>
> > wrote:
> > > > > >
> > > > > > And then in WUHU under General Settings you might need to make
> > sure you
> > > > > > have Write curdat.lst and Write Extended Data. Not sure about
> > those but I
> > > > > > suspect they are needed.
> > > > > >
> > > > > >
> > > > > > On Sun, Jun 3, 2012 at 11:57 AM, KNHBRIST1 <steve_03222@> wrote:
> > > > > >
> > > > > > > **
> > > > >
> > > > > > >
> > > > > > >
> > > > > > > Yes it does:
> > > > > > > 14:55|<metarsky></metarsky>|<metarweather></metarweather>|Temp:
> > 60.3
> > > > > > > °F|Hum: 67.0 Pres 29.71 "|24Hr Rain 1.06 " |Winds SW 4.5 MPH
> > > > > > >
> > > > > > > Using:
> > > > > > > metarskyweb 1
> > > > > > > metarairport VNY
> > > > > > >
> > > > > > > metarvis 1
> > > > > > > metarskydesc Sky:
> > > > > > > metarvisdesc Vis:
> > > > > > > uselocalfirst 1
> > > > > > > trimend 1
> > > > > > > showerrors 0
> > > > > > > round 1
> > > > > > > test 0
> > > > > > >
> > > > > > > --- In wuhu_software_group@yahoogroups.com, Don Lafferty <don@>
> > wrote:
> > > > > > > >
> > > > > > > > What happens if you put in a known good airport code like VNY?
> > > > > That's the
> > > > > > > > one I use which is Van Nuys in Los Angeles. Try that and see
> > if it
> > > > > still
> > > > > > > > does the same thing.
> > > > > > > >
> > > > > > > > On Sun, Jun 3, 2012 at 10:44 AM, KNHBRIST1 <steve_03222@>
> > wrote:
> > > > > > > >
> > > > > > > > > **
> > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > https://twitter.com/#!/SteveGunn5
> > > > > > > > > and yes
> > > > > > > > > metarskyweb 1
> > > > > > > > > metarairport K1P1
> > > > > > > > > metarvis 1
> > > > > > > > > metarskydesc Sky:
> > > > > > > > > metarvisdesc Vis:
> > > > > > > > > uselocalfirst 1
> > > > > > > > > trimend 1
> > > > > > > > > showerrors 0
> > > > > > > > > round 1
> > > > > > > > > test 0
> > > > > > > > >
> > > > > > > > >
> > > > > > > > > --- In wuhu_software_group@yahoogroups.com, Don Lafferty
> > <don@>
> > > > > wrote:
> > > > > > > > > >
> > > > > > > > > > And make sure you have the METAR things set to 1 in the
> > > > > wuhutweet.cfg
> > > > > > > > > file.
> > > > > > > > > >
> > > > > > > > > > On Sun, Jun 3, 2012 at 10:38 AM, Don Lafferty <don@>
> > wrote:
> > > > > > > > > >
> > > > > > > > > > > What's your Twitter URL?
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > On Sun, Jun 3, 2012 at 10:21 AM, KNHBRIST1 <steve_03222@
> > >
> > > > > wrote:
> > > > > > > > > > >
> > > > > > > > > > >> **
> > > > > > > > >
> > > > > > > > > > >>
> > > > > > > > > > >>
> > > > > > > > > > >> That airport is in TN, I am in NH. I tried K1P1 which
> > is the
> > > > > code
> > > > > > > no
> > > > > > > > > > >> luck. I know it is available as I use it for YoWindow.
> > I get
> > > > > this:
> > > > > > > > > > >>
> > > > > 13:20|<metarsky></metarsky>|<metarweather></metarweather>|Temp:
> > > > > > > 58.5
> > > > > > > > > > >> °F|Hum: 69.0 Pres 29.74 "|24Hr Rain 1.26 " |Winds SE
> > 1.5 MPH
> > > > > > > > > > >>
> > > > > > > > > > >> I am using this in WUHU copied and pasted from Manual
> > > > > > > > > > >> WUHU_Tweet.exe
> > > > > > > > > > >>
> > > > > > > > >
> > > > > > >
> > > > >
> >
"%TimeHHMM%|<metarsky>%MetarSkyConditions%</metarsky>|<metarweather>%MetarWeathe\
rConditions%</metarweather>|Temp:
> > > > > > > > > > >> %OutdoorTempDegF% °F|Hum: %OutdoorHumidity% %|Pres
> > > > > > > > > > >> %OutdoorPressureRelativeINHG% "|24Hr Rain
> > %OutdoorRain24HrIN%
> > > > > > > "|Winds
> > > > > > > > > > >> %OutdoorWindDirectionLetters%
> > %OutdoorWindAverageSpeedMPH%
> > > > > > > > > MPH|Windchill:
> > > > > > > > > > >> %OutdoorWindchillF% °F"
> > > > > > > > > > >>
> > > > > > > > > > >>
> > > > > > > > > > >> --- In wuhu_software_group@yahoogroups.com, Don
> > Lafferty
> > > > > <don@>
> > > > > > > > > wrote:
> > > > > > > > > > >> >
> > > > > > > > > > >> > Looks like KTRI should be the closest METAR to you.
> > It's an
> > > > > > > airport
> > > > > > > > > near
> > > > > > > > > > >> > Bristol.
> > > > > > > > > > >> >
> > > > > > > > > > >> >
> > > > > > > > > > >> > On Sun, Jun 3, 2012 at 9:59 AM, KNHBRIST1
> > <steve_03222@>
> > > > > wrote:
> > > > > > > > > > >> >
> > > > > > > > > > >> > > **
> > > > > > > > > > >>
> > > > > > > > > > >> > >
> > > > > > > > > > >> > >
> > > > > > > > > > >> > > Don, thanks for your help I will read further and
> > play
> > > > > around
> > > > > > > > > with it.
> > > > > > > > > > >> > > Again, I appreciate your assistance.
> > > > > > > > > > >> > > Steve
> > > > > > > > > > >> > >
> > > > > > > > > > >> > >
> > > > > > > > > > >> > >
> > > > > > > > > > >> >
> > > > > > > > > > >> >
> > > > > > > > > > >> >
> > > > > > > > > > >> > --
> > > > > > > > > > >> > The day Microsoft starts making vacuum cleaners is
> > the day
> > > > > they
> > > > > > > > > start
> > > > > > > > > > >> > making something that doesn't suck.
> > > > > > > > > > >> >
> > > > > > > > > > >>
> > > > > > > > > > >>
> > > > > > > > > > >>
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > >
> > > > > > > > > > > --
> > > > > > > > > > > The day Microsoft starts making vacuum cleaners is the
> > day they
> > > > > > > start
> > > > > > > > > > > making something that doesn't suck.
> > > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > >
> > > > > > > > > > --
> > > > > > > > > > The day Microsoft starts making vacuum cleaners is the day
> > they
> > > > > start
> > > > > > > > > > making something that doesn't suck.
> > > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > --
> > > > > > > > The day Microsoft starts making vacuum cleaners is the day
> > they start
> > > > > > > > making something that doesn't suck.
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> > > > > > --
> > > > > > The day Microsoft starts making vacuum cleaners is the day they
> > start
> > > > > > making something that doesn't suck.
> > > > > >
> > > > >
> > > > >
> > > > >
> > > >
> > > >
> > > >
> > > > --
> > > > The day Microsoft starts making vacuum cleaners is the day they start
> > > > making something that doesn't suck.
> > > >
> > >
> >
> >
> >
>
>
>
> --
> The day Microsoft starts making vacuum cleaners is the day they start
> making something that doesn't suck.
>

Hi,
I am updating Weatherunderground using WUHU and have been for 6 months. recently
my rapidfire web page is not populating, it the splash comes up with all the
fields but they are not populated. There is a red refreshing box in the upper
right corner but nothing ever happens. I checked WU and my data is being
populated so my uploads are occurring, any idea why my rapidfire page is not
being populated?
Thanks

I had what I think is a similar occurrence.  I think what you said was that to
see current data you are forced to reload the page.

This happened to me recently.  There is a user setting to turn rapid fire
on/off.  I'd always run with it on.  Suddenly, it went away.  I have an idea
that an upgrade may have reset that feature.

Look under your settings.  I think you'll see rapid fire is disabled.

--- In wuhu_software_group@yahoogroups.com, John Celenza <john.celenza@...>
wrote:
>
> Hello,
>
> I did just upgrade our rapidfire ingestion servers. This could have
> something to do with the problem.
>
> This is an FYI just in case it helps debug the issue.
>
> What PWS station ID is this related to?
>
> Thanks,
> John
>
>   [image: logo]
> *John Celenza** Director of Technology,Weather Underground*
> Tel: 415-983-2605  | Mobile: 415-794-8648
> www.wunderground.com
>    Want a signature like mine?
>
<http://r1.wisestamp.com/r/landing?promo=22&dest=http%3A%2F%2Fwww.wisestamp.com%\
2Femail-install%3Futm_source%3Dextension%26utm_medium%3Demail%26utm_campaign%3Dp\
romo_22>
> Click
>
here.<http://r1.wisestamp.com/r/landing?promo=22&dest=http%3A%2F%2Fwww.wisestamp\
.com%2Femail-install%3Futm_source%3Dextension%26utm_medium%3Demail%26utm_campaig\
n%3Dpromo_22>
>
>
>
> On Mon, Jun 4, 2012 at 10:41 AM, dougbubbles <dougbubbles@...> wrote:
>
> > **
> >
> >
> > Hi,
> > I am updating Weatherunderground using WUHU and have been for 6 months.
> > recently my rapidfire web page is not populating, it the splash comes up
> > with all the fields but they are not populated. There is a red refreshing
> > box in the upper right corner but nothing ever happens. I checked WU and my
> > data is being populated so my uploads are occurring, any idea why my
> > rapidfire page is not being populated?
> > Thanks
> >
> >
> >
>

KINCARME5


--- In wuhu_software_group@yahoogroups.com, John Celenza <john.celenza@...>
wrote:
>
> Hello,
>
> I did just upgrade our rapidfire ingestion servers. This could have
> something to do with the problem.
>
> This is an FYI just in case it helps debug the issue.
>
> What PWS station ID is this related to?
>
> Thanks,
> John
>
>   [image: logo]
> *John Celenza** Director of Technology,Weather Underground*
> Tel: 415-983-2605  | Mobile: 415-794-8648
> www.wunderground.com
>    Want a signature like mine?
>
<http://r1.wisestamp.com/r/landing?promo=22&dest=http%3A%2F%2Fwww.wisestamp.com%\
2Femail-install%3Futm_source%3Dextension%26utm_medium%3Demail%26utm_campaign%3Dp\
romo_22>
> Click
>
here.<http://r1.wisestamp.com/r/landing?promo=22&dest=http%3A%2F%2Fwww.wisestamp\
.com%2Femail-install%3Futm_source%3Dextension%26utm_medium%3Demail%26utm_campaig\
n%3Dpromo_22>
>
>
>
> On Mon, Jun 4, 2012 at 10:41 AM, dougbubbles <dougbubbles@...> wrote:
>
> > **
> >
> >
> > Hi,
> > I am updating Weatherunderground using WUHU and have been for 6 months.
> > recently my rapidfire web page is not populating, it the splash comes up
> > with all the fields but they are not populated. There is a red refreshing
> > box in the upper right corner but nothing ever happens. I checked WU and my
> > data is being populated so my uploads are occurring, any idea why my
> > rapidfire page is not being populated?
> > Thanks
> >
> >
> >
>

Thank you for your reply.
No, refresh/reload does not fix the problem.
I have checked and rapid fire was/is checked.
Doug

--- In wuhu_software_group@yahoogroups.com, "Ken" <yahoo@...> wrote:
>
> I had what I think is a similar occurrence.  I think what you said was that to
see current data you are forced to reload the page.
>
> This happened to me recently.  There is a user setting to turn rapid fire
on/off.  I'd always run with it on.  Suddenly, it went away.  I have an idea
that an upgrade may have reset that feature.
>
> Look under your settings.  I think you'll see rapid fire is disabled.
>
> --- In wuhu_software_group@yahoogroups.com, John Celenza <john.celenza@>
wrote:
> >
> > Hello,
> >
> > I did just upgrade our rapidfire ingestion servers. This could have
> > something to do with the problem.
> >
> > This is an FYI just in case it helps debug the issue.
> >
> > What PWS station ID is this related to?
> >
> > Thanks,
> > John
> >
> >   [image: logo]
> > *John Celenza** Director of Technology,Weather Underground*
> > Tel: 415-983-2605  | Mobile: 415-794-8648
> > www.wunderground.com
> >    Want a signature like mine?
> >
<http://r1.wisestamp.com/r/landing?promo=22&dest=http%3A%2F%2Fwww.wisestamp.com%\
2Femail-install%3Futm_source%3Dextension%26utm_medium%3Demail%26utm_campaign%3Dp\
romo_22>
> > Click
> >
here.<http://r1.wisestamp.com/r/landing?promo=22&dest=http%3A%2F%2Fwww.wisestamp\
.com%2Femail-install%3Futm_source%3Dextension%26utm_medium%3Demail%26utm_campaig\
n%3Dpromo_22>
> >
> >
> >
> > On Mon, Jun 4, 2012 at 10:41 AM, dougbubbles <dougbubbles@> wrote:
> >
> > > **
> > >
> > >
> > > Hi,
> > > I am updating Weatherunderground using WUHU and have been for 6 months.
> > > recently my rapidfire web page is not populating, it the splash comes up
> > > with all the fields but they are not populated. There is a red refreshing
> > > box in the upper right corner but nothing ever happens. I checked WU and
my
> > > data is being populated so my uploads are occurring, any idea why my
> > > rapidfire page is not being populated?
> > > Thanks
> > >
> > >
> > >
> >
>

Hi John,
Station ID is KINCARME5.
Thanks,
Doug

--- In wuhu_software_group@yahoogroups.com, John Celenza <john.celenza@...>
wrote:
>
> Hello,
>
> I did just upgrade our rapidfire ingestion servers. This could have
> something to do with the problem.
>
> This is an FYI just in case it helps debug the issue.
>
> What PWS station ID is this related to?
>
> Thanks,
> John
>
>   [image: logo]
> *John Celenza** Director of Technology,Weather Underground*
> Tel: 415-983-2605  | Mobile: 415-794-8648
> www.wunderground.com
>    Want a signature like mine?
>
<http://r1.wisestamp.com/r/landing?promo=22&dest=http%3A%2F%2Fwww.wisestamp.com%\
2Femail-install%3Futm_source%3Dextension%26utm_medium%3Demail%26utm_campaign%3Dp\
romo_22>
> Click
>
here.<http://r1.wisestamp.com/r/landing?promo=22&dest=http%3A%2F%2Fwww.wisestamp\
.com%2Femail-install%3Futm_source%3Dextension%26utm_medium%3Demail%26utm_campaig\
n%3Dpromo_22>
>
>
>
> On Mon, Jun 4, 2012 at 10:41 AM, dougbubbles <dougbubbles@...> wrote:
>
> > **
> >
> >
> > Hi,
> > I am updating Weatherunderground using WUHU and have been for 6 months.
> > recently my rapidfire web page is not populating, it the splash comes up
> > with all the fields but they are not populated. There is a red refreshing
> > box in the upper right corner but nothing ever happens. I checked WU and my
> > data is being populated so my uploads are occurring, any idea why my
> > rapidfire page is not being populated?
> > Thanks
> >
> >
> >
>

I'm looking to tweak my reported rain fall reading. I have a CoCoRaHS manual
dump rain gauge and a wireless auto dump gauge that came with my Lacross weather
station. I wanted to know if I change the rainfall Coefficients(multipliers)
from 1.0000 to some other number would it bring the reading into the more
accurate reading of my manual gauge. If yes how would I go about finding that
number.

I would recommend creating a spread sheet that has the manual readings in one
column and the La Crosse readings in another. You can then create a tweak in the
spreadsheet and chart the two at the same time (manual readings versus tweaked).


--- In wuhu_software_group@yahoogroups.com, "combs1@..." <combs1@...> wrote:
>
> I'm looking to tweak my reported rain fall reading. I have a CoCoRaHS manual
dump rain gauge and a wireless auto dump gauge that came with my Lacross weather
station. I wanted to know if I change the rainfall Coefficients(multipliers)
from 1.0000 to some other number would it bring the reading into the more
accurate reading of my manual gauge. If yes how would I go about finding that
number.
>

Does WUHU and the Heavy Weather Pro 2800 work with Ubuntu?

I'm having major (and expensive) issues with Windows XP SP3. It crashed on me at
the end of May (this year) and it's costing me allot to get it back to the state
it was in. The PC downloaded and installed the recent Windows security updates
and now everything doesn't work right. I had other issues long before this major
crash happen with other Windows security updates, like the sound stopped working
or the graphics end up being funky. Right now the WV5 Communications Service
will not run, so the USB plug-in transceiver will not communicate with the
console.

I have tried out Ubuntu and I like what I see. The OS boots up far faster than
XP. But I worry that my PWS won't be able to do what it "was" doing with XP.

The majority of the drivers in the Kernel are either damaged or corrupt, so I
was told.

As to maintaining a "Clean PC", this PC goes through a thorough scan everyday
with Avast 7.0, Malwarebytes, C-Cleaner, Spybot S&D and I even use Spyware
Blaster. All of these are done everyday. It was the latest Windows Security
Update that caused the PC to crash. It ran fine after the download, the update
and reboot. But after the reboot and I try to open, close or simply click on the
Start button and the whole machine freezes up. That's when I ran the Compaq
restore discs. Now everything is not running right. Suppose to have plug-n-play,
that doesn't work. Plug something in and nothing happens.

I can't get the operating system updated as Microsoft can't verify I have a
legit operating system. It was legit before the security update.

The version of Ubuntu I have will strip the hard drive completely clean. It will
do a thorough reformat of the hard drive. Anything that's on it will be gone. My
brother done that to his PC and he showed just how much faster his older PC is
now running Ubuntu.

I found out I cannot use it any ways as it is not compatible with dial-up
internet connection. It can only be used with Broadband, wireless internet and
wi-fi. Someday --- I would like to switch to wireless internet. I'm tired of
dial-up. Too dang slow to do anything. Including updating the many apps I use.

--- In wuhu_software_group@yahoogroups.com, ed willson <skymeat@...> wrote:
>
> Fish Water,
>      Giving up Microsoft because of a troublesome PC is like having a bad
> date and going gay.  I'm not trying to be harsh either. If you can't
> maintain a clean running windows system any linux flavor will give you
> fits.  The learning curve is a razor.
>
> I'd bet that you have some hardware that is faulty.
>
> If you're still running XP on that computer send me an email - I'll check
> the logs/etc and see what's causing the problem.
>
>
> Thanks,
>     Ed
>
>
>
>
> On Sat, Jun 9, 2012 at 7:16 PM, Don Lafferty <don@...> wrote:
>
> > **
> >
> >
> > I believe there are a few people running WUHU under WINE.  Your mileage
> > may vary.
> >
> >
> >
> > On Sat, Jun 9, 2012 at 5:51 PM, fish_water_black <
> > fish_water_black@...> wrote:
> >
> >> **
> >>
> >>
> >> Does WUHU and the Heavy Weather Pro 2800 work with Ubuntu?
> >>
> >> I'm having major (and expensive) issues with Windows XP SP3. It crashed
> >> on me at the end of May (this year) and it's costing me allot to get it
> >> back to the state it was in. The PC downloaded and installed the recent
> >> Windows security updates and now everything doesn't work right. I had other
> >> issues long before this major crash happen with other Windows security
> >> updates, like the sound stopped working or the graphics end up being funky.
> >> Right now the WV5 Communications Service will not run, so the USB plug-in
> >> transceiver will not communicate with the console.
> >>
> >> I have tried out Ubuntu and I like what I see. The OS boots up far faster
> >> than XP. But I worry that my PWS won't be able to do what it "was" doing
> >> with XP.
> >>
> >>
> >
> >
> > --
> > The day Microsoft starts making vacuum cleaners is the day they start
> > making something that doesn't suck.
> >
> >
> >
>

I've gotten several dew point 0 in the last 2 days.  You can see them at 15:38,
15:43, snd 15:53 for today 6/16.  It looks like the times correlate to the rain
sensor error.  I double checked everything here and there are no strange dew
point readings on the wuhu PC.  Here are the logs:

at Jun 16 15:29:35 2012 > Alarm Data Corrected has been deactivated.
Sat Jun 16 15:34:40 2012 > Rain Sensor - Did not receive update within 300
seconds.
Sat Jun 16 15:44:35 2012 > Alarm Console Failure has been activated.
Sat Jun 16 15:46:55 2012 > Alarm Console Failure has been deactivated.
Sat Jun 16 15:51:53 2012 > Rain Sensor - Did not receive update within 300
seconds.
Sat Jun 16 16:27:05 2012 > Alarm Pressure Rising has been deactivated.

KFLWIMAU2
Barbara

--- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...>
wrote:
>
>
> That is odd. I looked at the data on WU for yesterday and it did have a 0.0
dew point low reading.
>
> I am pretty sure that the problem is not happening on the WUHU side as there
are checks to make sure that variables do not change rapidly and there would
have been a notification in the log.
>
> It might have something to do with your Internet connectivity issues or
perhaps it is coincidence that these events seem to happen at the same time.
>
> We might need someone at WU to monitor your station to catch what is
happening.
>
>
> --- In wuhu_software_group@yahoogroups.com, Barbara Rosen <gqsbrosen@> wrote:
> >
> > Welcome back. 
> >
> >
> > The station ID is in the subject line: KFLWIMAU2.  My other station ID is
KFLWIMAU3, but that never gets this error. 
> >
> >
> > Here's the thing.  There's no dew point 0.0 reading on my PC or weather
station.  Its coming up on WU probably because of some transmission problem. 
Furthermore, WU shows this 0.0 dew point even when its not in the data
displayed, so they are obviously not displaying all the records used to
calculate the max-mins.  We have a lot of internet interruptions here.
> >
> > I wouldn't have worried about a bad dew point reading on WU, except that
someone from WU manually kicked both my stations out of the database on May 19th
because of bad temperature readings.  This is what WU wrote me:
> > "It looks like both stations had been manually pulled
> > from our main pages because of trouble with the temperature. "  It took me
until yesterday (10 days!!!, 5 emails, 2 support tickets) to get them to make my
stations selectable again, and I don't know what temperatures they were
complaining about.  The heat index on WU looks pretty erratic.  Is that
related to dew point?
> >
> > To summarize, my opinion is that the answer is in the WU database.  There's
nothing on my weather stations or PC or view of my stations on WU.  There must
be something getting messed up in the WU DB when transmission is interrupted.
> >
> > Thanks,
> > Barbara
> >
> >
> >
> >
> >
> > ________________________________
> >  From: wuhu_software <wuhu_software@>
> > To: wuhu_software_group@yahoogroups.com
> > Sent: Tuesday, May 29, 2012 8:29 PM
> > Subject: [wuhu_software_group] Re: Dew Point 0.0 Posting on WU for KFLWIMAU2
> >
> >
> >  
> >
> > I would have expected to see something in the log about the dew point being
out of range. Please post your Weather Underground station ID and the date and
time that 0.0 was reported then I will take a look.
> >
> > --- In wuhu_software_group@yahoogroups.com, "Barbara" <gqsbrosen@> wrote:
> > >
> > > Hi,
> > >
> > > Per your request, I am reporting the posting of a Dew Point 0.0 to weather
underground.
> > >
> > > My stations were just re enabled.  I see a Dew Point 0.0 Posting for today
5/29 in the daily summary, but I can't find it in the detailed listing, so I
can't tell when it happened.  Here are today's logs:
> > >
> > > Tue May 29 00:01:42 2012 > Rain Sensor - Did not receive update within 300
seconds.
> > > Tue May 29 01:27:25 2012 > Weather Underground Live Upload: Final Fatal
Eror (No more retries) InternetOpenUrl() returned error 0x00002ee2 (12002),
ERROR_INTERNET_TIMEOUT - WSA Socket Error 0x0000274c (10060).
> > > Tue May 29 01:27:25 2012 > Alarm Weather Underground Upload Failure has
been activated.
> > > Tue May 29 01:29:23 2012 > Weather Underground Background Upload: Final
Fatal Eror (No more retries) InternetOpenUrl() returned error 0x00002ee2
(12002), ERROR_INTERNET_TIMEOUT - WSA Socket Error 0x0000274c (10060).
> > > Tue May 29 01:29:25 2012 > Weather Underground Live Upload: Final Fatal
Eror (No more retries) InternetOpenUrl() returned error 0x00002ee2 (12002),
ERROR_INTERNET_TIMEOUT - WSA Socket Error 0x0000274c (10060).
> > > Tue May 29 01:30:02 2012 > Alarm Weather Underground Upload Failure has
been deactivated.
> > > Tue May 29 01:31:21 2012 > Weather Underground Background Upload: Final
Fatal Eror (No more retries) InternetOpenUrl() returned error 0x00002ee2
(12002), ERROR_INTERNET_TIMEOUT - WSA Socket Error 0x0000274c (10060).
> > >
> >
>

In Windows always go back to your last restore point after an "update" causes
heartburn. Linux might be a good alternative as you should be able to use
dial-up with it not sure about WUHU though...

Arnold In The Smokies
DW1121

--- In wuhu_software_group@yahoogroups.com, "fish_water_black"
<fish_water_black@...> wrote:
>
> The majority of the drivers in the Kernel are either damaged or corrupt, so I
was told.
>
> As to maintaining a "Clean PC", this PC goes through a thorough scan everyday
with Avast 7.0, Malwarebytes, C-Cleaner, Spybot S&D and I even use Spyware
Blaster. All of these are done everyday. It was the latest Windows Security
Update that caused the PC to crash. It ran fine after the download, the update
and reboot. But after the reboot and I try to open, close or simply click on the
Start button and the whole machine freezes up. That's when I ran the Compaq
restore discs. Now everything is not running right. Suppose to have plug-n-play,
that doesn't work. Plug something in and nothing happens.
>
> I can't get the operating system updated as Microsoft can't verify I have a
legit operating system. It was legit before the security update.
>
> The version of Ubuntu I have will strip the hard drive completely clean. It
will do a thorough reformat of the hard drive. Anything that's on it will be
gone. My brother done that to his PC and he showed just how much faster his
older PC is now running Ubuntu.
>
> I found out I cannot use it any ways as it is not compatible with dial-up
internet connection. It can only be used with Broadband, wireless internet and
wi-fi. Someday --- I would like to switch to wireless internet. I'm tired of
dial-up. Too dang slow to do anything. Including updating the many apps I use.
>
> --- In wuhu_software_group@yahoogroups.com, ed willson <skymeat@> wrote:
> >
> > Fish Water,
> >      Giving up Microsoft because of a troublesome PC is like having a bad
> > date and going gay.  I'm not trying to be harsh either. If you can't
> > maintain a clean running windows system any linux flavor will give you
> > fits.  The learning curve is a razor.
> >
> > I'd bet that you have some hardware that is faulty.
> >
> > If you're still running XP on that computer send me an email - I'll check
> > the logs/etc and see what's causing the problem.
> >
> >
> > Thanks,
> >     Ed
> >
> >
> >
> >
> > On Sat, Jun 9, 2012 at 7:16 PM, Don Lafferty <don@> wrote:
> >
> > > **
> > >
> > >
> > > I believe there are a few people running WUHU under WINE.  Your mileage
> > > may vary.
> > >
> > >
> > >
> > > On Sat, Jun 9, 2012 at 5:51 PM, fish_water_black <
> > > fish_water_black@> wrote:
> > >
> > >> **
> > >>
> > >>
> > >> Does WUHU and the Heavy Weather Pro 2800 work with Ubuntu?
> > >>
> > >> I'm having major (and expensive) issues with Windows XP SP3. It crashed
> > >> on me at the end of May (this year) and it's costing me allot to get it
> > >> back to the state it was in. The PC downloaded and installed the recent
> > >> Windows security updates and now everything doesn't work right. I had
other
> > >> issues long before this major crash happen with other Windows security
> > >> updates, like the sound stopped working or the graphics end up being
funky.
> > >> Right now the WV5 Communications Service will not run, so the USB plug-in
> > >> transceiver will not communicate with the console.
> > >>
> > >> I have tried out Ubuntu and I like what I see. The OS boots up far faster
> > >> than XP. But I worry that my PWS won't be able to do what it "was" doing
> > >> with XP.
> > >>
> > >>
> > >
> > >
> > > --
> > > The day Microsoft starts making vacuum cleaners is the day they start
> > > making something that doesn't suck.
> > >
> > >
> > >
> >
>

Thanks!!!
Barbara


--- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...>
wrote:
>
> Barbara,
> Please test the following version and report back if you see the issue
> again.
> WUHU216_32_B205.zip
> <http://home.comcast.net/~wuhu_software/files/WUHU216_32_B205.zip>
>
> --- In wuhu_software_group@yahoogroups.com, "Barbara" <gqsbrosen@>
> wrote:
> >
> >
> > I've gotten several dew point 0 in the last 2 days.  You can see them
> at 15:38, 15:43, snd 15:53 for today 6/16.  It looks like the times
> correlate to the rain sensor error.  I double checked everything here
> and there are no strange dew point readings on the wuhu PC.  Here are
> the logs:
> >
> > at Jun 16 15:29:35 2012 > Alarm Data Corrected has been deactivated.
> > Sat Jun 16 15:34:40 2012 > Rain Sensor - Did not receive update within
> 300 seconds.
> > Sat Jun 16 15:44:35 2012 > Alarm Console Failure has been activated.
> > Sat Jun 16 15:46:55 2012 > Alarm Console Failure has been deactivated.
> > Sat Jun 16 15:51:53 2012 > Rain Sensor - Did not receive update within
> 300 seconds.
> > Sat Jun 16 16:27:05 2012 > Alarm Pressure Rising has been deactivated.
> >
> > KFLWIMAU2
> > Barbara
> >
> > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
> wuhu_software@ wrote:
> > >
> > >
> > > That is odd. I looked at the data on WU for yesterday and it did
> have a 0.0 dew point low reading.
> > >
> > > I am pretty sure that the problem is not happening on the WUHU side
> as there are checks to make sure that variables do not change rapidly
> and there would have been a notification in the log.
> > >
> > > It might have something to do with your Internet connectivity issues
> or perhaps it is coincidence that these events seem to happen at the
> same time.
> > >
> > > We might need someone at WU to monitor your station to catch what is
> happening.
> > >
> > >
> > > --- In wuhu_software_group@yahoogroups.com, Barbara Rosen
> <gqsbrosen@> wrote:
> > > >
> > > > Welcome back.
> > > >
> > > >
> > > > The station ID is in the subject line: KFLWIMAU2.  My other
> station ID is KFLWIMAU3, but that never gets this error.
> > > >
> > > >
> > > > Here's the thing.  There's no dew point 0.0 reading on my PC or
> weather station.  Its coming up on WU probably because of some
> transmission problem.  Furthermore, WU shows this 0.0 dew point even
> when its not in the data displayed, so they are obviously not displaying
> all the records used to calculate the max-mins.  We have a lot of
> internet interruptions here.
> > > >
> > > > I wouldn't have worried about a bad dew point reading on WU,
> except that someone from WU manually kicked both my stations out of the
> database on May 19th because of bad temperature readings.  This is what
> WU wrote me:
> > > > "It looks like both stations had been manually pulled
> > > > from our main pages because of trouble with the temperature. "  It
> took me until yesterday (10 days!!!, 5 emails, 2 support tickets) to get
> them to make my stations selectable again, and I don't know what
> temperatures they were complaining about.  The heat index on WU looks
> pretty erratic.  Is that related to dew point?
> > > >
> > > > To summarize, my opinion is that the answer is in the WU database.
> There's nothing on my weather stations or PC or view of my stations on
> WU.  There must be something getting messed up in the WU DB when
> transmission is interrupted.
> > > >
> > > > Thanks,
> > > > Barbara
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > ________________________________
> > > >  From: wuhu_software <wuhu_software@>
> > > > To: wuhu_software_group@yahoogroups.com
> > > > Sent: Tuesday, May 29, 2012 8:29 PM
> > > > Subject: [wuhu_software_group] Re: Dew Point 0.0 Posting on WU for
> KFLWIMAU2
> > > >
> > > >
> > > >
> > > >
> > > > I would have expected to see something in the log about the dew
> point being out of range. Please post your Weather Underground station
> ID and the date and time that 0.0 was reported then I will take a look.
> > > >
> > > > --- In wuhu_software_group@yahoogroups.com, "Barbara" <gqsbrosen@>
> wrote:
> > > > >
> > > > > Hi,
> > > > >
> > > > > Per your request, I am reporting the posting of a Dew Point 0.0
> to weather underground.
> > > > >
> > > > > My stations were just re enabled.  I see a Dew Point 0.0 Posting
> for today 5/29 in the daily summary, but I can't find it in the detailed
> listing, so I can't tell when it happened.  Here are today's logs:
> > > > >
> > > > > Tue May 29 00:01:42 2012 > Rain Sensor - Did not receive update
> within 300 seconds.
> > > > > Tue May 29 01:27:25 2012 > Weather Underground Live Upload:
> Final Fatal Eror (No more retries) InternetOpenUrl() returned error
> 0x00002ee2 (12002), ERROR_INTERNET_TIMEOUT - WSA Socket Error 0x0000274c
> (10060).
> > > > > Tue May 29 01:27:25 2012 > Alarm Weather Underground Upload
> Failure has been activated.
> > > > > Tue May 29 01:29:23 2012 > Weather Underground Background
> Upload: Final Fatal Eror (No more retries) InternetOpenUrl() returned
> error 0x00002ee2 (12002), ERROR_INTERNET_TIMEOUT - WSA Socket Error
> 0x0000274c (10060).
> > > > > Tue May 29 01:29:25 2012 > Weather Underground Live Upload:
> Final Fatal Eror (No more retries) InternetOpenUrl() returned error
> 0x00002ee2 (12002), ERROR_INTERNET_TIMEOUT - WSA Socket Error 0x0000274c
> (10060).
> > > > > Tue May 29 01:30:02 2012 > Alarm Weather Underground Upload
> Failure has been deactivated.
> > > > > Tue May 29 01:31:21 2012 > Weather Underground Background
> Upload: Final Fatal Eror (No more retries) InternetOpenUrl() returned
> error 0x00002ee2 (12002), ERROR_INTERNET_TIMEOUT - WSA Socket Error
> 0x0000274c (10060).
> > > > >
> > > >
> > >
> >
>

I am not sure if this was something that Yahoo posted on groups or whether some
tricky spammer is up to no good.

Please do not blindly follow links or use any attachments until the source is
determined.

Thanks.


--- In wuhu_software_group@yahoogroups.com, wuhu_software_group@yahoogroups.com
wrote:
>
> Reminder from: wuhu_software_group Yahoo! Group
>  http://groups.yahoo.com/group/wuhu_software_group/cal
>
> Form Filler to Comment on Blogs Forums Facebook Twitter Multiple Clipboard
Scary
> Monday June 18, 2012
> 12:00 am - 12:00 am
>
> Notes:
> Form Filler to Comment on Blogs Forums Facebook Twitter Multiple Clipboard
Scary Easy Software by J. Richard Kirkham Have you ever spent a long ...
>
>
> All Rights Reserved
>  Copyright © 2012
>  Yahoo! Inc.
>  http://www.yahoo.com
>
> Privacy Policy:
>  http://privacy.yahoo.com/privacy/us
>
> Terms of Service:
>  http://docs.yahoo.com/info/terms/
>