Hi,

I'm a newbie to weather stations.

Here's my situation:
I am running the latest version software (WUHU216_32_B212.zip) on Windows 7
Starter Edition.

I installed this once and had it uploading to wunderground (KMOKANSA50) just
fine.   I could shutdown the laptop and restart and history would upload and
then start uploading live data at 1 minute intervals.

I decided to change my WRM200 to log data at 15 minute intervals.  At that point
I could upload history, but no more updates would load until I shut down,
collected some history, and started the laptop again.

I uninstalled and reinstalled WUHU. to no effect.

Does anyone have any ideas?

Thanks,

Jim

If it is an Acu-Rite station, the user cannot run Heavyweather that is intended
for La Crosse stations.

Currently Acu-Rite stations are not supported.

I know Weather Display does support those stations. You might also check the
Cumulus website.

--- In wuhu_software_group@yahoogroups.com, "weatherbugnathan" <backyard@...>
wrote:
>
> Hey guys,
>
> One of our WeatherBug Backyard Station owners is having issues sending data to
us over WUHU. Data's flowing to Wunderground OK. Any help would be appreciated.
Here's his info:
>
> Using WUHU to feed weather information from my Acu-Rite Weather Station into
WeatherBug.  Below is from WU log:
> Wed Nov 28 23:06:43 2012 > WUHU monitoring stopped.
> Wed Nov 28 23:06:51 2012 > WUHU monitoring started (WUHU216HW).
> Wed Nov 28 23:06:51 2012 > Monitoring file: "C:\HeavyWeather\currdat.lst".
> Wed Nov 28 23:06:51 2012 > Weather Underground ID: KPAHARVE3
> Wed Nov 28 23:06:51 2012 > WeatherBug ID: p15788
> Wed Nov 28 23:12:38 2012 > An error occurred reading the outdoor temperature
in degrees F from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the outdoor temperature
in degrees C from currdat.lst. Value="--.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the indoor temperature in
degrees F from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the indoor temperature in
degrees C from currdat.lst. Value="--.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the outdoor humidity from
currdat.lst. Value="--"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the indoor humidity from
currdat.lst. Value="--"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the dewpoint in degrees F
from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the dewpoint in degrees C
from currdat.lst. Value="--.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the wind chill in degrees
F from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the wind chill in degrees
C from currdat.lst. Value="--.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the wind speed in MPH
from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the wind speed in KMH
from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the wind direction from
currdat.lst. Value="---.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the rain total in IN from
currdat.lst. Value="---.--"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the rain total in MM from
currdat.lst. Value="----.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the rainfall 24 HR in IN
from currdat.lst. Value="--.--"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the rainfall 24 HR in MM
from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the rainfall 1 HR in IN
from currdat.lst. Value="--.--"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the rainfall 1 HR in MM
from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the relative pressure in
INHG from currdat.lst. Value="---.--"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the relative pressure in
HPA from currdat.lst. Value="----.-"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the absolute pressure in
INHG from currdat.lst. Value="---.--"
> Wed Nov 28 23:12:38 2012 > An error occurred reading the absolute pressure in
HPA from currdat.lst. Value="----.-"
> Wed Nov 28 23:12:38 2012 > Alarm Data Rejected has been activated.
> Wed Nov 28 23:12:38 2012 > Communications error or invalid/corrupt data
retrieved from console.
> Wed Nov 28 23:12:53 2012 > An error occurred reading the outdoor temperature
in degrees F from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the outdoor temperature
in degrees C from currdat.lst. Value="--.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the indoor temperature in
degrees F from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the indoor temperature in
degrees C from currdat.lst. Value="--.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the outdoor humidity from
currdat.lst. Value="--"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the indoor humidity from
currdat.lst. Value="--"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the dewpoint in degrees F
from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the dewpoint in degrees C
from currdat.lst. Value="--.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the wind chill in degrees
F from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the wind chill in degrees
C from currdat.lst. Value="--.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the wind speed in MPH
from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the wind speed in KMH
from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the wind direction from
currdat.lst. Value="---.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the rain total in IN from
currdat.lst. Value="---.--"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the rain total in MM from
currdat.lst. Value="----.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the rainfall 24 HR in IN
from currdat.lst. Value="--.--"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the rainfall 24 HR in MM
from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the rainfall 1 HR in IN
from currdat.lst. Value="--.--"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the rainfall 1 HR in MM
from currdat.lst. Value="---.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the relative pressure in
INHG from currdat.lst. Value="---.--"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the relative pressure in
HPA from currdat.lst. Value="----.-"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the absolute pressure in
INHG from currdat.lst. Value="---.--"
> Wed Nov 28 23:12:53 2012 > An error occurred reading the absolute pressure in
HPA from currdat.lst. Value="----.-"
> Wed Nov 28 23:12:53 2012 > Communications error or invalid/corrupt data
retrieved from console.
> Wed Nov 28 23:13:08 2012 > An error occurred reading the outdoor temperature
in degrees F from currdat.lst. Value="---.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the outdoor temperature
in degrees C from currdat.lst. Value="--.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the indoor temperature in
degrees F from currdat.lst. Value="---.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the indoor temperature in
degrees C from currdat.lst. Value="--.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the outdoor humidity from
currdat.lst. Value="--"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the indoor humidity from
currdat.lst. Value="--"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the dewpoint in degrees F
from currdat.lst. Value="---.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the dewpoint in degrees C
from currdat.lst. Value="--.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the wind chill in degrees
F from currdat.lst. Value="---.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the wind chill in degrees
C from currdat.lst. Value="--.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the wind speed in MPH
from currdat.lst. Value="---.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the wind speed in KMH
from currdat.lst. Value="---.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the wind direction from
currdat.lst. Value="---.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the rain total in IN from
currdat.lst. Value="---.--"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the rain total in MM from
currdat.lst. Value="----.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the rainfall 24 HR in IN
from currdat.lst. Value="--.--"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the rainfall 24 HR in MM
from currdat.lst. Value="---.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the rainfall 1 HR in IN
from currdat.lst. Value="--.--"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the rainfall 1 HR in MM
from currdat.lst. Value="---.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the relative pressure in
INHG from currdat.lst. Value="---.--"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the relative pressure in
HPA from currdat.lst. Value="----.-"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the absolute pressure in
INHG from currdat.lst. Value="---.--"
> Wed Nov 28 23:13:08 2012 > An error occurred reading the absolute pressure in
HPA from currdat.lst. Value="----.-"
> Wed Nov 28 23:13:08 2012 > Communications error or invalid/corrupt data
retrieved from console.
>
> Here is the Make of my weather station:  Chaney Acu-Rite 01015 1015
professional Weather Station Center.
>

On the main screen, do any of the values in the left most column contain "OFL"?


--- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@...>
wrote:
>
> Hi,
>
> I'm a newbie to weather stations.
>
> Here's my situation:
> I am running the latest version software (WUHU216_32_B212.zip) on Windows 7
Starter Edition.
>
> I installed this once and had it uploading to wunderground (KMOKANSA50) just
fine.   I could shutdown the laptop and restart and history would upload and
then start uploading live data at 1 minute intervals.
>
> I decided to change my WRM200 to log data at 15 minute intervals.  At that
point I could upload history, but no more updates would load until I shut down,
collected some history, and started the laptop again.
>
> I uninstalled and reinstalled WUHU. to no effect.
>
> Does anyone have any ideas?
>
> Thanks,
>
> Jim
>

Thanks for the info! I'll let him know.

--- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...>
wrote:
>
>
> If it is an Acu-Rite station, the user cannot run Heavyweather that is
intended for La Crosse stations.
>
> Currently Acu-Rite stations are not supported.
>
> I know Weather Display does support those stations. You might also check the
Cumulus website.
>
> --- In wuhu_software_group@yahoogroups.com, "weatherbugnathan" <backyard@>
wrote:
> >
> > Hey guys,
> >
> > One of our WeatherBug Backyard Station owners is having issues sending data
to us over WUHU. Data's flowing to Wunderground OK. Any help would be
appreciated. Here's his info:
> >
> > Using WUHU to feed weather information from my Acu-Rite Weather Station into
WeatherBug.  Below is from WU log:
> > Wed Nov 28 23:06:43 2012 > WUHU monitoring stopped.
> > Wed Nov 28 23:06:51 2012 > WUHU monitoring started (WUHU216HW).
> > Wed Nov 28 23:06:51 2012 > Monitoring file: "C:\HeavyWeather\currdat.lst".
> > Wed Nov 28 23:06:51 2012 > Weather Underground ID: KPAHARVE3
> > Wed Nov 28 23:06:51 2012 > WeatherBug ID: p15788
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the outdoor temperature
in degrees F from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the outdoor temperature
in degrees C from currdat.lst. Value="--.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the indoor temperature
in degrees F from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the indoor temperature
in degrees C from currdat.lst. Value="--.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the outdoor humidity
from currdat.lst. Value="--"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the indoor humidity
from currdat.lst. Value="--"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the dewpoint in degrees
F from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the dewpoint in degrees
C from currdat.lst. Value="--.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the wind chill in
degrees F from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the wind chill in
degrees C from currdat.lst. Value="--.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the wind speed in MPH
from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the wind speed in KMH
from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the wind direction from
currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the rain total in IN
from currdat.lst. Value="---.--"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the rain total in MM
from currdat.lst. Value="----.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the rainfall 24 HR in
IN from currdat.lst. Value="--.--"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the rainfall 24 HR in
MM from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the rainfall 1 HR in IN
from currdat.lst. Value="--.--"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the rainfall 1 HR in MM
from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the relative pressure
in INHG from currdat.lst. Value="---.--"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the relative pressure
in HPA from currdat.lst. Value="----.-"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the absolute pressure
in INHG from currdat.lst. Value="---.--"
> > Wed Nov 28 23:12:38 2012 > An error occurred reading the absolute pressure
in HPA from currdat.lst. Value="----.-"
> > Wed Nov 28 23:12:38 2012 > Alarm Data Rejected has been activated.
> > Wed Nov 28 23:12:38 2012 > Communications error or invalid/corrupt data
retrieved from console.
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the outdoor temperature
in degrees F from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the outdoor temperature
in degrees C from currdat.lst. Value="--.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the indoor temperature
in degrees F from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the indoor temperature
in degrees C from currdat.lst. Value="--.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the outdoor humidity
from currdat.lst. Value="--"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the indoor humidity
from currdat.lst. Value="--"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the dewpoint in degrees
F from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the dewpoint in degrees
C from currdat.lst. Value="--.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the wind chill in
degrees F from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the wind chill in
degrees C from currdat.lst. Value="--.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the wind speed in MPH
from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the wind speed in KMH
from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the wind direction from
currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the rain total in IN
from currdat.lst. Value="---.--"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the rain total in MM
from currdat.lst. Value="----.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the rainfall 24 HR in
IN from currdat.lst. Value="--.--"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the rainfall 24 HR in
MM from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the rainfall 1 HR in IN
from currdat.lst. Value="--.--"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the rainfall 1 HR in MM
from currdat.lst. Value="---.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the relative pressure
in INHG from currdat.lst. Value="---.--"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the relative pressure
in HPA from currdat.lst. Value="----.-"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the absolute pressure
in INHG from currdat.lst. Value="---.--"
> > Wed Nov 28 23:12:53 2012 > An error occurred reading the absolute pressure
in HPA from currdat.lst. Value="----.-"
> > Wed Nov 28 23:12:53 2012 > Communications error or invalid/corrupt data
retrieved from console.
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the outdoor temperature
in degrees F from currdat.lst. Value="---.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the outdoor temperature
in degrees C from currdat.lst. Value="--.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the indoor temperature
in degrees F from currdat.lst. Value="---.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the indoor temperature
in degrees C from currdat.lst. Value="--.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the outdoor humidity
from currdat.lst. Value="--"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the indoor humidity
from currdat.lst. Value="--"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the dewpoint in degrees
F from currdat.lst. Value="---.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the dewpoint in degrees
C from currdat.lst. Value="--.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the wind chill in
degrees F from currdat.lst. Value="---.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the wind chill in
degrees C from currdat.lst. Value="--.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the wind speed in MPH
from currdat.lst. Value="---.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the wind speed in KMH
from currdat.lst. Value="---.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the wind direction from
currdat.lst. Value="---.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the rain total in IN
from currdat.lst. Value="---.--"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the rain total in MM
from currdat.lst. Value="----.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the rainfall 24 HR in
IN from currdat.lst. Value="--.--"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the rainfall 24 HR in
MM from currdat.lst. Value="---.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the rainfall 1 HR in IN
from currdat.lst. Value="--.--"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the rainfall 1 HR in MM
from currdat.lst. Value="---.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the relative pressure
in INHG from currdat.lst. Value="---.--"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the relative pressure
in HPA from currdat.lst. Value="----.-"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the absolute pressure
in INHG from currdat.lst. Value="---.--"
> > Wed Nov 28 23:13:08 2012 > An error occurred reading the absolute pressure
in HPA from currdat.lst. Value="----.-"
> > Wed Nov 28 23:13:08 2012 > Communications error or invalid/corrupt data
retrieved from console.
> >
> > Here is the Make of my weather station:  Chaney Acu-Rite 01015 1015
professional Weather Station Center.
> >
>

Thanks for the response.

Yes, several items are marked OFL (Windgust, DewPoint, the Rainfalls).

Thanks,

Jim

--- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...>
wrote:
>
>
> On the main screen, do any of the values in the left most column contain
"OFL"?
>
>
> --- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@> wrote:
> >
> > Hi,
> >
> > I'm a newbie to weather stations.
> >
> > Here's my situation:
> > I am running the latest version software (WUHU216_32_B212.zip) on Windows 7
Starter Edition.
> >
> > I installed this once and had it uploading to wunderground (KMOKANSA50) just
fine.   I could shutdown the laptop and restart and history would upload and
then start uploading live data at 1 minute intervals.
> >
> > I decided to change my WRM200 to log data at 15 minute intervals.  At that
point I could upload history, but no more updates would load until I shut down,
collected some history, and started the laptop again.
> >
> > I uninstalled and reinstalled WUHU. to no effect.
> >
> > Does anyone have any ideas?
> >
> > Thanks,
> >
> > Jim
> >
>

This would suggest that one or more of your sensors is not reporting in. After 5
minutes or so this should result in errors being posted to the log regarding
sensors that did not report in.

You may need to re-synchronize your sensors to the console. There is a procedure
to do that although I do not recall.

Also, you might consider moving the console to a location closest to the sensors
or move the sensors toward the console if they are out of range.

--- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@...>
wrote:
>
> Thanks for the response.
>
> Yes, several items are marked OFL (Windgust, DewPoint, the Rainfalls).
>
> Thanks,
>
> Jim
>
> --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@>
wrote:
> >
> >
> > On the main screen, do any of the values in the left most column contain
"OFL"?
> >
> >
> > --- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@>
wrote:
> > >
> > > Hi,
> > >
> > > I'm a newbie to weather stations.
> > >
> > > Here's my situation:
> > > I am running the latest version software (WUHU216_32_B212.zip) on Windows
7 Starter Edition.
> > >
> > > I installed this once and had it uploading to wunderground (KMOKANSA50)
just fine.   I could shutdown the laptop and restart and history would upload
and then start uploading live data at 1 minute intervals.
> > >
> > > I decided to change my WRM200 to log data at 15 minute intervals.  At that
point I could upload history, but no more updates would load until I shut down,
collected some history, and started the laptop again.
> > >
> > > I uninstalled and reinstalled WUHU. to no effect.
> > >
> > > Does anyone have any ideas?
> > >
> > > Thanks,
> > >
> > > Jim
> > >
> >
>

All sensors are showing ok on the console.  Also, everything that is "tanked up"
in the console while my computer is off, loads to wunderground as soon as I
startup WUHU.

Do you still think I need to reset/rescan the sensors?

Thanks,

Jim

--- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...>
wrote:
>
>
> This would suggest that one or more of your sensors is not reporting in. After
5 minutes or so this should result in errors being posted to the log regarding
sensors that did not report in.
>
> You may need to re-synchronize your sensors to the console. There is a
procedure to do that although I do not recall.
>
> Also, you might consider moving the console to a location closest to the
sensors or move the sensors toward the console if they are out of range.
>
> --- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@> wrote:
> >
> > Thanks for the response.
> >
> > Yes, several items are marked OFL (Windgust, DewPoint, the Rainfalls).
> >
> > Thanks,
> >
> > Jim
> >
> > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@>
wrote:
> > >
> > >
> > > On the main screen, do any of the values in the left most column contain
"OFL"?
> > >
> > >
> > > --- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@>
wrote:
> > > >
> > > > Hi,
> > > >
> > > > I'm a newbie to weather stations.
> > > >
> > > > Here's my situation:
> > > > I am running the latest version software (WUHU216_32_B212.zip) on
Windows 7 Starter Edition.
> > > >
> > > > I installed this once and had it uploading to wunderground (KMOKANSA50)
just fine.   I could shutdown the laptop and restart and history would upload
and then start uploading live data at 1 minute intervals.
> > > >
> > > > I decided to change my WRM200 to log data at 15 minute intervals.  At
that point I could upload history, but no more updates would load until I shut
down, collected some history, and started the laptop again.
> > > >
> > > > I uninstalled and reinstalled WUHU. to no effect.
> > > >
> > > > Does anyone have any ideas?
> > > >
> > > > Thanks,
> > > >
> > > > Jim
> > > >
> > >
> >
>

Hmmm... That is odd. Did you see any messages in the log screen after 5-10
minutes? I would think that warnings would be posted?


--- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@...>
wrote:
>
> All sensors are showing ok on the console.  Also, everything that is "tanked
up" in the console while my computer is off, loads to wunderground as soon as I
startup WUHU.
>
> Do you still think I need to reset/rescan the sensors?
>
> Thanks,
>
> Jim
>
> --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@>
wrote:
> >
> >
> > This would suggest that one or more of your sensors is not reporting in.
After 5 minutes or so this should result in errors being posted to the log
regarding sensors that did not report in.
> >
> > You may need to re-synchronize your sensors to the console. There is a
procedure to do that although I do not recall.
> >
> > Also, you might consider moving the console to a location closest to the
sensors or move the sensors toward the console if they are out of range.
> >
> > --- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@>
wrote:
> > >
> > > Thanks for the response.
> > >
> > > Yes, several items are marked OFL (Windgust, DewPoint, the Rainfalls).
> > >
> > > Thanks,
> > >
> > > Jim
> > >
> > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
<wuhu_software@> wrote:
> > > >
> > > >
> > > > On the main screen, do any of the values in the left most column contain
"OFL"?
> > > >
> > > >
> > > > --- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@>
wrote:
> > > > >
> > > > > Hi,
> > > > >
> > > > > I'm a newbie to weather stations.
> > > > >
> > > > > Here's my situation:
> > > > > I am running the latest version software (WUHU216_32_B212.zip) on
Windows 7 Starter Edition.
> > > > >
> > > > > I installed this once and had it uploading to wunderground
(KMOKANSA50) just fine.   I could shutdown the laptop and restart and history
would upload and then start uploading live data at 1 minute intervals.
> > > > >
> > > > > I decided to change my WRM200 to log data at 15 minute intervals.  At
that point I could upload history, but no more updates would load until I shut
down, collected some history, and started the laptop again.
> > > > >
> > > > > I uninstalled and reinstalled WUHU. to no effect.
> > > > >
> > > > > Does anyone have any ideas?
> > > > >
> > > > > Thanks,
> > > > >
> > > > > Jim
> > > > >
> > > >
> > >
> >
>

Here's a snippet of the log.   When history is done downloading, posting to
wunderground stops and I get ofl for several calculated fields (dew point, etc.)
from that point, it appears to be not uploading.

Thanks for helping me out!

Jim


Sat Dec 01 21:19:39 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:39 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:39 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:42 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:42 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:45 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:49 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:19:55 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:20:00 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:20:03 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:20:05 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:20:15 2012 > Request History (DA) sent to console succesfully.
Sat Dec 01 21:20:17 2012 > End of history retrieval detected. Entering live data
mode.
Sat Dec 01 21:20:35 2012 > Ack (D0) sent to console succesfully.
Sat Dec 01 21:20:55 2012 > Ack (D0) sent to console succesfully.
Sat Dec 01 21:21:15 2012 > Ack (D0) sent to console succesfully.
Sat Dec 01 21:21:35 2012 > Ack (D0) sent to console succesfully.


--- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...>
wrote:
>
>
> Hmmm... That is odd. Did you see any messages in the log screen after 5-10
minutes? I would think that warnings would be posted?
>
>
> --- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@> wrote:
> >
> > All sensors are showing ok on the console.  Also, everything that is "tanked
up" in the console while my computer is off, loads to wunderground as soon as I
startup WUHU.
> >
> > Do you still think I need to reset/rescan the sensors?
> >
> > Thanks,
> >
> > Jim
> >
> > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@>
wrote:
> > >
> > >
> > > This would suggest that one or more of your sensors is not reporting in.
After 5 minutes or so this should result in errors being posted to the log
regarding sensors that did not report in.
> > >
> > > You may need to re-synchronize your sensors to the console. There is a
procedure to do that although I do not recall.
> > >
> > > Also, you might consider moving the console to a location closest to the
sensors or move the sensors toward the console if they are out of range.
> > >
> > > --- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@>
wrote:
> > > >
> > > > Thanks for the response.
> > > >
> > > > Yes, several items are marked OFL (Windgust, DewPoint, the Rainfalls).
> > > >
> > > > Thanks,
> > > >
> > > > Jim
> > > >
> > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
<wuhu_software@> wrote:
> > > > >
> > > > >
> > > > > On the main screen, do any of the values in the left most column
contain "OFL"?
> > > > >
> > > > >
> > > > > --- In wuhu_software_group@yahoogroups.com, "jkwildman"
<jwkurtenbach@> wrote:
> > > > > >
> > > > > > Hi,
> > > > > >
> > > > > > I'm a newbie to weather stations.
> > > > > >
> > > > > > Here's my situation:
> > > > > > I am running the latest version software (WUHU216_32_B212.zip) on
Windows 7 Starter Edition.
> > > > > >
> > > > > > I installed this once and had it uploading to wunderground
(KMOKANSA50) just fine.   I could shutdown the laptop and restart and history
would upload and then start uploading live data at 1 minute intervals.
> > > > > >
> > > > > > I decided to change my WRM200 to log data at 15 minute intervals. 
At that point I could upload history, but no more updates would load until I
shut down, collected some history, and started the laptop again.
> > > > > >
> > > > > > I uninstalled and reinstalled WUHU. to no effect.
> > > > > >
> > > > > > Does anyone have any ideas?
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > > Jim
> > > > > >
> > > > >
> > > >
> > >
> >
>

If you have not disabled any sensors in the tweak screen, eventually you should
see an error in the log about which physical sensor did not report in. I believe
it is 5 mins but it might be 10 minutes before the error is posted.


--- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@...>
wrote:
>
> Here's a snippet of the log.   When history is done downloading, posting to
wunderground stops and I get ofl for several calculated fields (dew point, etc.)
from that point, it appears to be not uploading.
>
> Thanks for helping me out!
>
> Jim
>
>
> Sat Dec 01 21:19:39 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:39 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:39 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:42 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:42 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:45 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:49 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:19:55 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:20:00 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:20:03 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:20:05 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:20:15 2012 > Request History (DA) sent to console succesfully.
> Sat Dec 01 21:20:17 2012 > End of history retrieval detected. Entering live
data mode.
> Sat Dec 01 21:20:35 2012 > Ack (D0) sent to console succesfully.
> Sat Dec 01 21:20:55 2012 > Ack (D0) sent to console succesfully.
> Sat Dec 01 21:21:15 2012 > Ack (D0) sent to console succesfully.
> Sat Dec 01 21:21:35 2012 > Ack (D0) sent to console succesfully.
>
>
> --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@>
wrote:
> >
> >
> > Hmmm... That is odd. Did you see any messages in the log screen after 5-10
minutes? I would think that warnings would be posted?
> >
> >
> > --- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@>
wrote:
> > >
> > > All sensors are showing ok on the console.  Also, everything that is
"tanked up" in the console while my computer is off, loads to wunderground as
soon as I startup WUHU.
> > >
> > > Do you still think I need to reset/rescan the sensors?
> > >
> > > Thanks,
> > >
> > > Jim
> > >
> > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
<wuhu_software@> wrote:
> > > >
> > > >
> > > > This would suggest that one or more of your sensors is not reporting in.
After 5 minutes or so this should result in errors being posted to the log
regarding sensors that did not report in.
> > > >
> > > > You may need to re-synchronize your sensors to the console. There is a
procedure to do that although I do not recall.
> > > >
> > > > Also, you might consider moving the console to a location closest to the
sensors or move the sensors toward the console if they are out of range.
> > > >
> > > > --- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@>
wrote:
> > > > >
> > > > > Thanks for the response.
> > > > >
> > > > > Yes, several items are marked OFL (Windgust, DewPoint, the Rainfalls).
> > > > >
> > > > > Thanks,
> > > > >
> > > > > Jim
> > > > >
> > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
<wuhu_software@> wrote:
> > > > > >
> > > > > >
> > > > > > On the main screen, do any of the values in the left most column
contain "OFL"?
> > > > > >
> > > > > >
> > > > > > --- In wuhu_software_group@yahoogroups.com, "jkwildman"
<jwkurtenbach@> wrote:
> > > > > > >
> > > > > > > Hi,
> > > > > > >
> > > > > > > I'm a newbie to weather stations.
> > > > > > >
> > > > > > > Here's my situation:
> > > > > > > I am running the latest version software (WUHU216_32_B212.zip) on
Windows 7 Starter Edition.
> > > > > > >
> > > > > > > I installed this once and had it uploading to wunderground
(KMOKANSA50) just fine.   I could shutdown the laptop and restart and history
would upload and then start uploading live data at 1 minute intervals.
> > > > > > >
> > > > > > > I decided to change my WRM200 to log data at 15 minute intervals. 
At that point I could upload history, but no more updates would load until I
shut down, collected some history, and started the laptop again.
> > > > > > >
> > > > > > > I uninstalled and reinstalled WUHU. to no effect.
> > > > > > >
> > > > > > > Does anyone have any ideas?
> > > > > > >
> > > > > > > Thanks,
> > > > > > >
> > > > > > > Jim
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>

Well...
I wasn't getting any errors.  But!  We haven't had rain for quite a while and my
rain gauge shows zero all the time.   I went out and poured a cup of water into
the rain sensor.

The base reported nothing!!

I reset both the Rain sensor and the console and...

Everything is working again!!

Thanks,

Jim

--- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...>
wrote:
>
>
> If you have not disabled any sensors in the tweak screen, eventually you
should see an error in the log about which physical sensor did not report in. I
believe it is 5 mins but it might be 10 minutes before the error is posted.
>
>
> --- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@> wrote:
> >
> > Here's a snippet of the log.   When history is done downloading, posting to
wunderground stops and I get ofl for several calculated fields (dew point, etc.)
from that point, it appears to be not uploading.
> >
> > Thanks for helping me out!
> >
> > Jim
> >
> >
> > Sat Dec 01 21:19:39 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:39 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:39 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:42 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:42 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:43 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:44 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:45 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:49 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:19:55 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:20:00 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:20:03 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:20:05 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:20:15 2012 > Request History (DA) sent to console succesfully.
> > Sat Dec 01 21:20:17 2012 > End of history retrieval detected. Entering live
data mode.
> > Sat Dec 01 21:20:35 2012 > Ack (D0) sent to console succesfully.
> > Sat Dec 01 21:20:55 2012 > Ack (D0) sent to console succesfully.
> > Sat Dec 01 21:21:15 2012 > Ack (D0) sent to console succesfully.
> > Sat Dec 01 21:21:35 2012 > Ack (D0) sent to console succesfully.
> >
> >
> > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@>
wrote:
> > >
> > >
> > > Hmmm... That is odd. Did you see any messages in the log screen after 5-10
minutes? I would think that warnings would be posted?
> > >
> > >
> > > --- In wuhu_software_group@yahoogroups.com, "jkwildman" <jwkurtenbach@>
wrote:
> > > >
> > > > All sensors are showing ok on the console.  Also, everything that is
"tanked up" in the console while my computer is off, loads to wunderground as
soon as I startup WUHU.
> > > >
> > > > Do you still think I need to reset/rescan the sensors?
> > > >
> > > > Thanks,
> > > >
> > > > Jim
> > > >
> > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
<wuhu_software@> wrote:
> > > > >
> > > > >
> > > > > This would suggest that one or more of your sensors is not reporting
in. After 5 minutes or so this should result in errors being posted to the log
regarding sensors that did not report in.
> > > > >
> > > > > You may need to re-synchronize your sensors to the console. There is a
procedure to do that although I do not recall.
> > > > >
> > > > > Also, you might consider moving the console to a location closest to
the sensors or move the sensors toward the console if they are out of range.
> > > > >
> > > > > --- In wuhu_software_group@yahoogroups.com, "jkwildman"
<jwkurtenbach@> wrote:
> > > > > >
> > > > > > Thanks for the response.
> > > > > >
> > > > > > Yes, several items are marked OFL (Windgust, DewPoint, the
Rainfalls).
> > > > > >
> > > > > > Thanks,
> > > > > >
> > > > > > Jim
> > > > > >
> > > > > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
<wuhu_software@> wrote:
> > > > > > >
> > > > > > >
> > > > > > > On the main screen, do any of the values in the left most column
contain "OFL"?
> > > > > > >
> > > > > > >
> > > > > > > --- In wuhu_software_group@yahoogroups.com, "jkwildman"
<jwkurtenbach@> wrote:
> > > > > > > >
> > > > > > > > Hi,
> > > > > > > >
> > > > > > > > I'm a newbie to weather stations.
> > > > > > > >
> > > > > > > > Here's my situation:
> > > > > > > > I am running the latest version software (WUHU216_32_B212.zip)
on Windows 7 Starter Edition.
> > > > > > > >
> > > > > > > > I installed this once and had it uploading to wunderground
(KMOKANSA50) just fine.   I could shutdown the laptop and restart and history
would upload and then start uploading live data at 1 minute intervals.
> > > > > > > >
> > > > > > > > I decided to change my WRM200 to log data at 15 minute
intervals.  At that point I could upload history, but no more updates would load
until I shut down, collected some history, and started the laptop again.
> > > > > > > >
> > > > > > > > I uninstalled and reinstalled WUHU. to no effect.
> > > > > > > >
> > > > > > > > Does anyone have any ideas?
> > > > > > > >
> > > > > > > > Thanks,
> > > > > > > >
> > > > > > > > Jim
> > > > > > > >
> > > > > > >
> > > > > >
> > > > >
> > > >
> > >
> >
>

I want to get my station up on the net.What do I need software and or hardware.
I operating windows 7 on a dell computer laptop. Using the la crosse usb to get
info from station. I have been reading about posts but still confused. La crosse
software ver 1.54 is what I am using. If you cound give me a step by step set up
to get me up and running.

thanks

John, the best place to start is to review this great manual that a member of
this list provided for us. After reviewing the manual, you can post some
specific questions that you may have here in the forum and I am sure someone
will be able to help get you started.

http://www.lissproductions.org/wuhu_manual/

Steve

 

I want to get my station up on the net.What do I need software and or hardware. I operating windows 7 on a dell computer laptop. Using the la crosse usb to get info from station. I have been reading about posts but still confused. La crosse software ver 1.54 is what I am using. If you cound give me a step by step set up to get me up and running.

thanks

--- In wuhu_software_group@yahoogroups.com, Joseph Kareh <josephkareh@...>
wrote:
>
> Hi john, i am a owner of lacrosse ws2800 serie, how can i help you
>
> Meteokareh.com
>
> Sent from my iPhone
>
> On Dec 3, 2012, at 2:01 AM, "John" <korky@...> wrote:
>
> > I want to get my station up on the net.What do I need software and or
hardware. I operating windows 7 on a dell computer laptop it only use USB as a
out and input. Using the la crosse usb stick to get info from station. I have
been reading about posts but still confused. La crosse software ver 1.54 is what
I am using. Can I use any other software to get it up on the net ? If you cound
give me a step by step set up to get me up and running.
> >
> > thanks
> >
> >
>

My WMR-100NA periodically stops sending data via USB and I have to Reset it
causing me to lose all rain statistics.  The log contains the message "The rain
total discrepancy will be corrected by assuming that the current rain total from
the console is correct ...".  After the Reset the rain totals are all zero.

Is there a way to override this assumption and keep the current rain totals?

BTW.  I've tried simply re-plugging the USB connection and that is not
sufficient.  The WMR-100NA has backup batteries and its AC adapter is plugged
into a UPS - so it must be a failure in the console.

Dick

Are you using the rain total anywhere like processing a web page? Is it just so
that you can see the rain total on the main screen?


--- In wuhu_software_group@yahoogroups.com, "dick_kf5sa" <shadowberr@...> wrote:
>
> My WMR-100NA periodically stops sending data via USB and I have to Reset it
causing me to lose all rain statistics.  The log contains the message "The rain
total discrepancy will be corrected by assuming that the current rain total from
the console is correct ...".  After the Reset the rain totals are all zero.
>
> Is there a way to override this assumption and keep the current rain totals?
>
> BTW.  I've tried simply re-plugging the USB connection and that is not
sufficient.  The WMR-100NA has backup batteries and its AC adapter is plugged
into a UPS - so it must be a failure in the console.
>
> Dick
>

If I have settings for WU, PWS, CWOP in Farenhite and inches how will the
program report to WOW?   Inches or metric?

I'm just looking at the Gauges window.  Would like its cumulative Total to
remain accurate across one of these console failures/reset.


--- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...>
wrote:
>
>
> Are you using the rain total anywhere like processing a web page? Is it just
so that you can see the rain total on the main screen?
>
>
> --- In wuhu_software_group@yahoogroups.com, "dick_kf5sa" <shadowberr@> wrote:
> >
> > My WMR-100NA periodically stops sending data via USB and I have to Reset it
causing me to lose all rain statistics.  The log contains the message "The rain
total discrepancy will be corrected by assuming that the current rain total from
the console is correct ...".  After the Reset the rain totals are all zero.
> >
> > Is there a way to override this assumption and keep the current rain totals?
> >
> > BTW.  I've tried simply re-plugging the USB connection and that is not
sufficient.  The WMR-100NA has backup batteries and its AC adapter is plugged
into a UPS - so it must be a failure in the console.
> >
> > Dick
> >
>

http://wow.metoffice.gov.uk/home

--- In wuhu_software_group@yahoogroups.com, Don Keating <eobic@...> wrote:
>
> What is WOW?
>
>
>
>
> ________________________________
>  From: marcelcanine <marcelcanine@...>
> To: wuhu_software_group@yahoogroups.com
> Sent: Sunday, December 9, 2012 11:03 AM
> Subject: [wuhu_software_group] WOW
>
>
>  
> If I have settings for WU, PWS, CWOP in Farenhite and inches how will the
program report to WOW?   Inches or metric?
>

English units are sent. They may convert for display on the web page.

--- In wuhu_software_group@yahoogroups.com, "marcelcanine" <marcelcanine@...>
wrote:
>
> If I have settings for WU, PWS, CWOP in Farenhite and inches how will the
program report to WOW?   Inches or metric?
>

I am not sure there is much that I can do about that but will think on it. An
offset could be added as a user configuration variable but this could lead to
confusion.


--- In wuhu_software_group@yahoogroups.com, "dick_kf5sa" <shadowberr@...> wrote:
>
> I'm just looking at the Gauges window.  Would like its cumulative Total to
remain accurate across one of these console failures/reset.
>
>
> --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@>
wrote:
> >
> >
> > Are you using the rain total anywhere like processing a web page? Is it just
so that you can see the rain total on the main screen?
> >
> >
> > --- In wuhu_software_group@yahoogroups.com, "dick_kf5sa" <shadowberr@>
wrote:
> > >
> > > My WMR-100NA periodically stops sending data via USB and I have to Reset
it causing me to lose all rain statistics.  The log contains the message "The
rain total discrepancy will be corrected by assuming that the current rain total
from the console is correct ...".  After the Reset the rain totals are all zero.
> > >
> > > Is there a way to override this assumption and keep the current rain
totals?
> > >
> > > BTW.  I've tried simply re-plugging the USB connection and that is not
sufficient.  The WMR-100NA has backup batteries and its AC adapter is plugged
into a UPS - so it must be a failure in the console.
> > >
> > > Dick
> > >
> >
>

The message in the log tends to imply that WUHU recognized the discrepancy and
chose to replace the current cumulative value with the zero value from the
console.

"The rain total discrepancy will be corrected by assuming that the current rain
total from the console is correct ...".

Is that not how it works?


--- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@...>
wrote:
>
>
> I am not sure there is much that I can do about that but will think on it. An
offset could be added as a user configuration variable but this could lead to
confusion.
>
>
> --- In wuhu_software_group@yahoogroups.com, "dick_kf5sa" <shadowberr@> wrote:
> >
> > I'm just looking at the Gauges window.  Would like its cumulative Total to
remain accurate across one of these console failures/reset.
> >
> >
> > --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@>
wrote:
> > >
> > >
> > > Are you using the rain total anywhere like processing a web page? Is it
just so that you can see the rain total on the main screen?
> > >
> > >
> > > --- In wuhu_software_group@yahoogroups.com, "dick_kf5sa" <shadowberr@>
wrote:
> > > >
> > > > My WMR-100NA periodically stops sending data via USB and I have to Reset
it causing me to lose all rain statistics.  The log contains the message "The
rain total discrepancy will be corrected by assuming that the current rain total
from the console is correct ...".  After the Reset the rain totals are all zero.
> > > >
> > > > Is there a way to override this assumption and keep the current rain
totals?
> > > >
> > > > BTW.  I've tried simply re-plugging the USB connection and that is not
sufficient.  The WMR-100NA has backup batteries and its AC adapter is plugged
into a UPS - so it must be a failure in the console.
> > > >
> > > > Dick
> > > >
> > >
> >
>

Hi, now I've signed up to Wundergroup, how can I take my weather station history
and upload it there?  Thanks

Hello
I am Othmar Gattringer the CEO of AWEKAS Weather Network. Some of our users did
have a problem to set the correct settings for the AWEKAS user interface.
The field name of the user name is "AWEKAS ID" - it should be "AWEKAS user
name". The AWEKAS id is the number of the station. So many users set the number
instead of the username and the transmission did not work.
Please rename "AWEKAS ID" to "AWEKAS user name" (or AWEKAS user) for one of the
next releases.

Thank you!
Othmar Gattringer
www.awekas.at

It must reconcile the two by accepting the new total as the correct total. It
then overwrites all records in memory so that any rain calculation performed by
WUHU is correct. The 1HR, 24HR, Daily, and other rain totals are calculated
depending on the station type. This is based on the data in memory.

An INI setting could perhaps be added that would affect the display only. Any
other solution would probably be overly complicated and lead to users not
understanding how yet another offset works and how to adjust it.



--- In wuhu_software_group@yahoogroups.com, "dick_kf5sa" <shadowberr@...> wrote:
>
> The message in the log tends to imply that WUHU recognized the discrepancy and
chose to replace the current cumulative value with the zero value from the
console.
>
> "The rain total discrepancy will be corrected by assuming that the current
rain total from the console is correct ...".
>
> Is that not how it works?
>
>
> --- In wuhu_software_group@yahoogroups.com, "wuhu_software" <wuhu_software@>
wrote:
> >
> >
> > I am not sure there is much that I can do about that but will think on it.
An offset could be added as a user configuration variable but this could lead to
confusion.
> >
> >
> > --- In wuhu_software_group@yahoogroups.com, "dick_kf5sa" <shadowberr@>
wrote:
> > >
> > > I'm just looking at the Gauges window.  Would like its cumulative Total to
remain accurate across one of these console failures/reset.
> > >
> > >
> > > --- In wuhu_software_group@yahoogroups.com, "wuhu_software"
<wuhu_software@> wrote:
> > > >
> > > >
> > > > Are you using the rain total anywhere like processing a web page? Is it
just so that you can see the rain total on the main screen?
> > > >
> > > >
> > > > --- In wuhu_software_group@yahoogroups.com, "dick_kf5sa" <shadowberr@>
wrote:
> > > > >
> > > > > My WMR-100NA periodically stops sending data via USB and I have to
Reset it causing me to lose all rain statistics.  The log contains the message
"The rain total discrepancy will be corrected by assuming that the current rain
total from the console is correct ...".  After the Reset the rain totals are all
zero.
> > > > >
> > > > > Is there a way to override this assumption and keep the current rain
totals?
> > > > >
> > > > > BTW.  I've tried simply re-plugging the USB connection and that is not
sufficient.  The WMR-100NA has backup batteries and its AC adapter is plugged
into a UPS - so it must be a failure in the console.
> > > > >
> > > > > Dick
> > > > >
> > > >
> > >
> >
>

Going forward the data will be uploaded.

Because there are many different history types, WUHU does not upload archived
history files.


--- In wuhu_software_group@yahoogroups.com, "adridaw" <adridaw@...> wrote:
>
> Hi, now I've signed up to Wundergroup, how can I take my weather station
history and upload it there?  Thanks
>

It will be changed in the next release. Thanks.

--- In wuhu_software_group@yahoogroups.com, "awekas" <awekas@...> wrote:
>
> Hello
> I am Othmar Gattringer the CEO of AWEKAS Weather Network. Some of our users
did have a problem to set the correct settings for the AWEKAS user interface.
> The field name of the user name is "AWEKAS ID" - it should be "AWEKAS user
name". The AWEKAS id is the number of the station. So many users set the number
instead of the username and the transmission did not work.
> Please rename "AWEKAS ID" to "AWEKAS user name" (or AWEKAS user) for one of
the next releases.
>
> Thank you!
> Othmar Gattringer
> www.awekas.at
>