Hello Vaclav, Well - let's see what we can find out here .... ... OK - missed this one (not tested on SUSE) Thank you. ... This are the devices which modprobe...
OK here is a new version <http://www.burri-web.org/bm98/stuff/ArtCamTest-20080401.tar.gz> You may want to capture all output (stdout and err) ArtCamTest &>...
Hello Vaclav, Besides it does not work at least we have a string now the other FTDI chip Thank you for your effort I'll be back if I find out more about this...
Hi again, Found quite some with Google... There is this message: <http://www.ussg.iu.edu/hypermail/linux/kernel/0710.1/0535.html> Here is Gentoo 2.6.23 r5...
Hello. Tests with another kernel versions shows the same result. lsusb -v says: Bus 002 Device 046: ID 0403:df35 Future Technology Devices International, Ltd ...
Hi Vaclav Just a short update Installed Gentoo in a vmWare environment (well pretty much handywork needed here) Anyhow updated to kernel 2.6.24.r4 (newest) and...
OK <http://www.burri-web.org/bm98/stuff/ArtCamTest-20080409.tar.gz> Here is the binary minus all the RESET commands. May I ask you for a try - there is still...
Hello Martin, I have found no difference. ArtCamTest - Started .... ArtCcdDrv::Connect() Ftd245IOUX::InitBoard() - device /dev/ttyUSB0 Ftd245IOUX::InitBoard()...
I have made 3 recordings of communication with camera on Windows, I hope that they might be useful. Recorded data and recorded FIT you can download from...
Hello. I have some bad news. ArtCamTest - Started .... ArtCcdDrv::Connect() Ftd245IOUX::InitBoard() - device /dev/ttyUSB0 Ftd245IOUX::InitBoard() - device...
Hi Vaclav, Glad you're still trying to get things running! Now the log looks like something else is interfering with the communication e.g. a second driver or...
Hello Martin. on http://panora.ma/logs.zip You can see my lsmod listing and usbmon listings for all ArtCamTest programs. In lsmod listing I cant see something...
Hi Vaclav, Looked into it - some hours later I conclude that it already breaks in the open(dev) statement. FTDI_SIO would apply a baudrate if this is not B0 in...
Hello Martin, After your last message I have been thinking about it little bit. I was going to buy the ftdi chip, ask my colleague for making some support...
Hello Vaclav, Well I found out too that it must be the parallel chip but the driver does not differentiate the 232 and the 245 As you might have seen in my...
Afternoon, I've got a clean install of Fedora 8 (I know not k/ubuntu) and complied the WxWidgets, both with 2.4 and without 2.4 compatibility however I still...
... Yes looks similar but the only issue reported by wxWidgets is that one is 2.4 & 2.6 compatable and the other is only 2.6 caompatable (both are 2.8.7) The...
... I use SUSE Linux and had problems when trying to run wxAstroCapture on version 10.2 to the extent that I gave up. I now run wxAstroCapture on SUSE v10.3,...
Hello All, My name is Reg, I've been doing astronomy for a few months and have just gotten the bug for webcams and astrophotography. I've got a celestron...
Hello Reg & welcome! See my comments below. ... The spc900nc should be very good. ... Switch off auto exposure and do it manually. A common problem is over ...
Thanks Carsten, just to clear a couple of things up, I was aware that I needed a wedge to be in EQ mode, I was actually asking if my information about pulse...
Hi Reg, Regarding your autoguiding test, I too am surprised that it worked for so long. Most controllers are set to sidereal rate slewing when autoguiding, so...
From memory I believe I set both Ra K and Dec K both to 30, I didn't touch Q I don't think, and guiderate was set to 99% (of sidereal)on the hand controller. ...
Hi, First off, greetings to you all on the forum and a big thank you to the authors of the wxAstroCapture application for devoting so much time and effort into...
... Hello Peter & welcome! I am not sure what causes the crash problem on W2K, it should indeed work. Ken Hough has reported it to be ok on W2K in an earlier...
... work. ... before, see ... pack you ... Hi Carsten, Thanks for the very quick response. The computer is running Windows 2000 (5.00.2195) SP4. The only...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
