Hey I just wanted to tell you about a great company I found! I applyed for a lower mortgage rate and i only had to fill in a simple form. This month alone I...
I'm a newby ... so please bare with me. I'm trying to counter bore some holes and I'm not having any luck. I've got a taig mill with smallish stepper motors so...
Hi Set up cncpro to use I and J always relative (alt O menu) This should work: M03 G90 G0 Z0.1 X-4.75 Y0 G1 Z-0.05 F1 G01X-4.812F1 G03X-4.812Y0I.062J0 ...
Jeff, I don't believe cnc pro supports using "R" parameters for circular inerpolation. I had to use I and J values. http://www.nfrpartners.com/nfrg2g3.htm ...
My old computer crashed and I reinstalled cnc pro on a newer computer. Intel celron processor with windows 2000 professional. Won't run. Need help with this...
Larry, Seems like Win 95 or 98 were recommended and the newer Windows versions had issues or work arounds to enable running CNCPro. If it were me, I'd stay...
Thanks for the advice. You are absolutely correct. After some trying I went to a local used computer store and purchased an older Pentium I computer for...
Hi Don Servos or steppers? Sounds like the problem is with the motor/driver not being able to keep up. Maybe set your accel down a little. Bob ... From: Don...
Don, Not sure if this will help but I once had a problem with z axis loosing position almost ever time I started to move it. Slowing down the feed rate helped...
Sounds like the same sort of problem I used to fight. I got rid of the steppers and went to servos. Much better, much more reliable, no missed steps or...
Hello, This may not be a CNCPRO question, but I am wondering? I have setup my cnc router to do jewelling on stainles steel for a friend. He is not familiar...
Our 2-axis machine has been plagued with stepper motor lock-up problems on and off for the past year. We acquired some Baldor DC Servo Motors and Drives and ...
Gecko 320 should do the job for you. Excellent vendor, excellent support, excellent product. Depending on the resolution of the encoder on the motor, you may...
Gecko 320 should do the job for you. Excellent vendor, excellent support, excellent product. Depending on the resolution of the encoder on the motor, you may...
Hi Don; The solution depends on what Baldor servos you have. If they are brush type motors then the easiest solution is either Gecko or Rutex drives. Rutex...
Just a word of caution. Make sure the problem isn't your acceleration rate is too high. It is adjusted in the set up. I had a similar problem and thought it...
Mark - thanks for the response. Not sure about the existing encoder on the Baldor DC brush type servo motors. It is a Sumtak Optcodrer, and has 1000P/R on the...
Thanks Doug, Baldor motors are DC brush type. I am trying to go from the computer (CNCPro) to the Gecko, to the servo motor. I am using a 5VDC power supply...
Is there any way to get CNCpro to run an a newer computer with Windows XP ? I have tried it on 2 computers and have had no luck . -- Ron Kline American...
Ron, CNCpro requires MS DOS or DRdos. XP has NONE. You will have to create a dual system disc, put DOS on one, XP on t'other. Boot to which you want. RichD...
IDEA Can I put 2 hard drives in the computer and have 98 on one and XP on the other . Is there a way to boot from a different drive ? ... -- Ron Kline American...
Ron, Yes, but the OS situation is the same. 2 logical drives or 2 physical drives = 2 drives. An OS on each one. XP will still be the primary OS. A dual boot...
Anyone know what happened to the Yeager Automation website? Also, anyone know what happened to this forum. it seems to have been overrun with spam messages...
Having problems with message search?
Fill out this form to ensure your group is one of the first to be migrated to the new message search system.
